How to paint ceilings correctly

How to paint ceilings? The question at first sight is stupid. Indeed, it's easier to come up with something than just pick up a cushion and walk them all over the surface of the ceiling. But this is not so. Each process has its own technology, which must be followed. This is the key to successful work.

If you do not know how to paint the ceilings correctly, you can get an unsightly result, which instead of pleasant feelings from fresh and beautiful repairs will cause in the shower only a note of disappointment. In our case, these are the so-called non-colors. That is, areas of the surface where the paint has a different texture and, as a consequence, different shades. To avoid such a result, several very important recommendations should be observed. If you follow them, then the probability of a quality work done will increase many times.

The first thing to start with is the choice of tools. This work can be done with a spray gun, roller or brush. The latter option is better to cut off immediately, because with its help it is very difficult to obtain an ideal result. Only great professionals can do this. Using a spray gun is, of course, a good option. But it is necessary to take it somewhere else. If you buy, the cost of repair will increase significantly. The most suitable tool is a roller. The price does not bite him, and it's quite easy to get a high-quality result with his help. So let's try to figure out how to paint the ceiling with a roller.

With the paint tool, the issue is resolved. You can start the work safely. And the first thing to emphasize is the mixing of paint. A lot depends on the quality of this operation. If it is unevenly mixed, then the texture of the paint applied to the ceiling will be different. And this will lead to the appearance of spots. The paint should be uniform. Be sure to read the manufacturer's instructions. If it says that when mixing, add water or other liquid in some amount, then it should be done. If there are no such recommendations, then you should not do this on your own initiative.

The distribution of paint on the roller is very important. And anyone who knows how to paint ceilings, this will confirm. It should be uniform. To achieve this is very simple. The roller should be dipped in a container with paint. It is dunk, but not completely immersed. After that, the paint on the roller should be rolled out on a pre-prepared grid or a piece of hardboard or linoleum, or even better - to purchase a special container. This is necessary in order to evenly distribute it throughout the instrument. It is possible that you will have to lower the roller into the container with paint again. If this is not done, and immediately proceed to apply the decorative layer to the ceiling, then the appearance of spots due to the different thickness of the paint layer in certain areas of the surface is likely. And this immediately catches your eye.

The next important point in the question of how to paint ceilings correctly is the very application of the material. Do this evenly and quickly. Passes in work should not be. The entire operation for applying decorative coating should take 15-20 minutes. During this time the paint will not have time to dry up. It will have a uniform texture. If there are gaps somewhere, then they should be immediately painted over, until the paint has dried. It is not always possible to see the performer, so in the corner of the room it is better to arrange an assistant who would look at the performance of the work and point out the problem areas.

With the process of applying the decorative layer, everything is clear. Another question: "How many times to paint the ceiling?" To achieve the required quality, it is sufficient to apply 2-3 layers. And each of them must go perpendicular to the previous one. With this approach, small defects will be almost invisible. Another important condition that must be observed is that each successive layer should be applied after the previous one has dried completely. It is very important. The drying time is indicated on the packaging.