How to make a ring from a coin. Ring from a coin by own hands

The idea of creating an original ring from a silver coin belongs to Nicholas Hekman. He independently took up the hammer and created such an accessory for his beloved. The girl was amazed, however, like all her relatives. The general admiration inspired Nicholas so much that he began to perfect his work and as a result released a whole series of original silver rings, but after that he stopped his work. To date, everyone can do this kind of work for their beloved. Homemade ringlet will be an excellent surprise, because the most valuable thing is that it was created with your own hands.

What is necessary in order to make a ring from a coin?

First of all you will need a plastic hammer, bolt, drill or any other tool with which you can make a hole. It can be, for example, a special apparatus. Use what is convenient for you. To make the shine, prepare the sandpaper. It will come in handy after the completion of the main work.

How to choose a coin for a ring?

It should be noted that it must meet certain requirements. Main characteristics:

• strength;
• security;
• the size;
• Colour.

Brass, silver, bronze and steel do not pose a threat to human health. That is why you should give preference to these materials. Copper and nickel can cause skin diseases and poisoning of the body.

Pay attention to the size. Small coins, face value up to 1 ruble, definitely will not do.

Make the ring itself: the first stage

First, decide which coin you will make the ring from. Excellent material will be silver. Then warm it red, so that it becomes elastic, but do not overdo it with the heating temperature. Otherwise, the coin is deformed, and some elements are smeared. After it acquires a red shade and slightly whitens, sharply lower it into cold water. At this point, you will hear hiss. Do not be afraid - this is a common phenomenon.

We pass to the main work to make a ring from the coin with our own hands. Using a drill, make a hole. Make sure that it is even. The bigger it is, the thinner the ring, but do not overdo it. Otherwise, the coin may burst.

The field of how you made a hole, you will need a plastic hammer and bolt, thanks to which you will be able to pick up the necessary size and create a shape. This tool is like a metal stick that expands from the bottom to the end. Wear a coin on the deadbolt and even blow the hammer down the ring, stretching it. This is a very painstaking process. Try to tap lightly on the product, otherwise it can deform. Carefully bring the ring to the size you need. There is a special marking on the crossbar. When you reach a certain level, remove the ring.

What it is necessary to know?

To make a ring from a coin, you need only use a plastic hammer. If you take a metal, you risk damaging the smallest elements of the coin. Accordingly, the surface of the product will turn out to be uneven, even after sandpaper processing.

It is not easy to make a ring from a coin, but if you follow the rules, you will certainly succeed. There is another very important nuance. To prevent your product from becoming conical, remove it from the deadbolt from time to time and turn it over. This is the hardest part, because it's not so easy to find the required size, as it seems at first glance. Follow the instructions carefully and you will certainly get a ring from the coin.

When you take the product off the crossbar, use forceps or pliers with a clamp to prevent it from scratching.

Safety regulations

When working with hot metal or silver, be sure to wear special gloves, because you risk burning yourself. It should be noted that in the first stage of manufacturing, when you work with a drill, you need to wear protective goggles or a mask. Equip your workplace in accordance with all safety rules. When you make a hole in the coin, cover the table with a sheet of fiberboard.

Grinding

Asking about how to make a ring with a coin, you need to thoroughly familiarize yourself with the manufacturing process. This article details all instructions. As we have already said, the most difficult stage of the work is the creation of the form. Grinding is the most pleasant process. When the ring is ready, you can enjoy the fruit of your labor. It remains only to give a gloss and shake off the extra husks.

Create shine and induce beauty

In order for the surface of the ring to turn smooth, you can make several dozen strokes with an ordinary spoon. They should be light, otherwise you risk deforming the ring. To make it smoother, use sandpaper or a special electric tool to eliminate external flaws. The surface of the ring, the photo of which you see below, will get a polished look.

It should be noted that there are several types of polishing tools: a large grain and rough. Choose the one that suits you best.

The manufacturing method that is used in this article is quite complicated, but as a result you will get the perfect product that will please you for many years. After polishing, you can decorate the ring with a beautiful engraving or original pattern. However, the result of your work depends on diligence.

How to organize the workflow?

It is necessary to prepare a workshop where you will have everything at hand. Choose as a material minted coins of soft alloy. Always remember this, because the preparatory process is no less important than the actual work itself.

What other technologies are used to make a ring from a coin? As you know, there are several methods. The second one can be used as an alternative. It begins with the fact that it is necessary to put the coin on the edge and cover it with some form. This is suitable for an ordinary spoon. This method of manufacturing differs from the previous one in that the coin does not need to be melted. Here it is necessary to flatten the rib, striking hard blows with a hammer. The edges should be treated evenly. Periodically look at what happened. After the edges of the coin are rounded, drill a hole, but not to the end. Stop the drill before it passes right through. Then treat the inside with a sandpaper and work the outer surface.

Another tip

How to make the ring perfect? Take the abrasive compound and apply it with a small piece of cloth. To achieve a mirror shine, you should wipe it several times. After this, prepare a grip, due to which it will be possible to firmly hold the coin in your hand. It is necessary that his lips have a curved shape. This will protect against dents and unwanted scratches. You can also use rubber felt or paper pads (any soft material is suitable).

The next step is to increase the hole in the center. Carefully ensure that the drill does not move to the sides, otherwise all the work done will go wrong. At this stage, you need to be patient. Carefully and painstakingly move the circle around the ring. After you have made a ring of the necessary size, you need to align the inner part with an emery roller.

Creating a ring from a coin is a painstaking process. It requires precise movements and following instructions. There are a lot of technologies. You can use different tools for manufacturing. For example, as a clamp, you can take the usual pliers, wrapping them with soft material. This will not damage the surface of the product. For polishing, there are also many different machines that will simplify the process.

The ring from the coin is an original and romantic gift. Any girl will appreciate such a wide gesture.