Homeliness, Repairs
How to lay the tile on the floor: recommendations
The process of laying tiles on the floor may seem quite complicated, but in practice it becomes clear that it is quite easy to perform all the operations, especially if you have enough patience. Having done all the work yourself, you will be able to save a lot of money. So, let's look at how to lay the tile on the floor.
You will need:
- Toothed spatula with a tooth height of 6-10 mm;
- mixer and electric drill, with their help you will prepare the adhesive composition;
- a tile cutter, which may well replace a Bulgarian with a diamond circle;
- A rubber hammer that will allow the tile to be properly placed by tapping;
- level or rule, the length of which should exceed 80 centimeters, this is necessary to control the correct placement of each tile. If the surface needs to be freed from unevenness, a perforator may be useful.
Speaking about how to lay the tile on the floor, it is worth noting that you need to do this on a flat surface that has already passed the preparation stage. First you can get the items out of the box, spread out on the floor to check the future drawing. Laying should be planned so that the cut-off parts are near the walls, where they will be almost invisible. If we consider the question of how to lay the tile on the floor, then it is worth paying attention to the arrows that are on it. All of them must be facing in the same direction.
When the direction is chosen, it is possible to apply glue to the surface with a trowel, and then use a notched trowel to remove excess. The remaining waves are laid tile, after which it must be pressed down, tapping with a rubber mallet. When further laying, it is important to monitor the correctness of the direction.
When working, you must immediately clean out the excess of the solution from the joints, and then install leveling crosses, which will give the same width of the joints. When the solution dries, you can start to trowel. To do this, the seams are freed from dust and excess solution, and then processed with a grout, which is applied with a rubber spatula.
If we talk about how to lay the tile on a wooden floor, then the process is similar, but first you need to make sure that the surface is flat.
Similar articles
Trending Now