Sports and Fitness, Extreme sports
How to knit a counter knot? Tourist Sites
Perhaps, very few people thought, but all kinds of nodes surround us everywhere. Without them, literally one can not do without a day: tie a tie, laces, clothesline ... well, it is only necessary to get out of the city - so the number of nodes and the need to be able to tie them up increases many times.
For sure, every fisherman or hunter can recall how a couple of knots are tied. What can we say about climbers or boatmen - after all, from the nodes in the literal sense, their own life can depend.
Counter knot, double, reverse, grapevine, Austrian ... sometimes the names themselves are not so easy to remember. However, through constant training you can always achieve what you want and remember not only the oncoming, but also the academic knot, and self-detaching ... and many others. It is important only to constantly train in practice, bringing all the actions to automatism, because in a critical situation of time, everything should be properly thought through and can simply not be remembered.
Counter knot
To all who are interested in how to knit a knot, the counter is recommended for learning first. After all, it, first, refers to the most necessary nodes - whether it's mountaineering or fishing, hunting, or even everyday life. It allows you to tie together two ropes, sometimes even different thicknesses, which often happens. The counterpart simply to untie, however it perfectly keeps the load. Due to these qualities, it is popular and most in demand.
It is necessary at the same time not to allow overlaps. If they were formed, eliminate them. When all the overlaps have been eliminated, you have to tighten the counter knot by grasping with one hand all the two ends of one and the other rope and in the same way with the other hand - at the ends of both ropes - and holding out hands with considerable effort in opposite directions.
During the arrangement of the counter node, you should also pay attention to the safety nets: their presence is mandatory.
Academic unit
The academic knot is quite easy to knit, it is designed to be able to bind the ends of ropes of different thicknesses. This node perfectly holds the load and does not tighten at the same time tightly, after removing the load, it can be quickly untied.
In order to tie an academic knot, one must have an idea of how a straight knot is knit , while the first rope forms a loop through which the second rope passes, is twisted twice and is taken out of the loop of the first rope. It is important to change the direction of the updates: first to one side, and then to another, otherwise the so-called baby knot, which is not as reliable as the academic one, can turn out.
This node requires mandatory use of safety (control) nodes.
Knot brachmock
To tie a braillock knot, you need to make a loop from the first rope, through it, pass the second rope so that it forms a small loop, and then through it two times passes through its end, tied around the loop of the first rope.
Shkit knot
It is believed that this knot is known to people since time immemorial: the knot bundle was found by archaeologists during the excavation of human settlements dated 7,000 years before our era.
Knot is used exclusively on ropes of plant origin. It holds only when the load is applied to it. There are a lot of its variations and applications, and therefore anyone who is interested in how to tie knots is recommended for compulsory study.
Counter guide
The knot is often used in mountaineering, it perfectly connects two bands or belts and holds them. If you use round ropes, such a knot can crawl under certain types of load.
Counter eight
Counter eight - node, also referring to one of the most ancient. Another name for it is the Flemish knot. Although he originally belonged to the sea knots, eventually he found a use on land.
If you want to link as two thick rope or rope and even a thin line, then this is perfectly suitable for the counter eight. The node is easy to learn, durable and quickly unties.
Bowline
This knot is also called a bower - by the name of a small wooden platform-bench, on which a seaman sits to, for example, paint the ship's side or clean it of shells.
In order to tie it up, you must first form a closed closed loop on the first rope, through this loop the end of the second rope is cut, it is put into the free end of the first rope and inserted into its loop. The connoisseurs are advised to memorize the same way as they did in the ancient courts: the cowardly hare in the burrow (the formation of the loop), the cowardly hare got out of the hole (the free end of the second rope is pulled through the loop of the first), the sneaking hare ran a tree (the end of the second rope is wound up at the end First), the cowardly hare again hid in the hole (passing the end of the second rope into the first loop).
Conductor
Refers to the nodes that are compulsory for mastering not only in the sea, but also in industrial mountaineering, for rescuers, etc. The conductor will perfectly help out, if it is necessary to organize a fastening point on the main rope, and you can knit it absolutely anywhere in its entire length.
The conductor knotted like the most common knot, but for this purpose, not one end of the rope is taken, but a double one - folded in half on any piece of rope. The loop, which is carried out at the exit, forms a convenient running "channel" through which it is possible to draw as another rope, belt or rope (hence the name of the knot), and organize another knot or fix the carbine.
Double Conductor
The double conductor assembly, as a rule, does not require safety nets due to the large friction and the property of self-tightening under loads. It also has the name "hare ears" for its characteristic appearance.
Grapevine
A beginner who has just begun to understand science, how to tie knots, this knot can not be recommended for mastering: it is rather complicated in execution. Moreover, it is incorrectly tied, it can cause an accident, although it may look like a true one.
Grapevine itself is two such half-nodes, they are tightened one after another after the string.
The sequence of the binding of grapevine is as follows: first, the first and second ropes must be folded together and together with the tied ends on each rope. The first rope is slightly higher than the second one. Then the free end of the first at a right angle is bent to the side to itself and is carried over the second rope. After that, the end is brought down and wraps both ropes at once, shifting in relation to this turn to the right side (to the first rope) and again bends towards oneself. Then the end is again brought down, so as to re-grip the rope. The end again shifts to the right and then is placed over the first and second ropes. A kind of hollow is formed between the ropes. Then, parallel to the hollow, the end is brought under both turns to the left. The first half-node is then tightened.
Similarly, the second half-node is tied, then these two half-nodes are pulled one to the other.
Stirrup
A stirrup knot, it's just a stirrup, it's also a whip. It is used for arranging a point of support for the foot. The second end of the rope can be fixed on a relief or artificial support. The appearance of the knot really looks like a rider for a rider. It is two loops opposing each other, which are both easily tightened and easily disintegrated, because they can be used when time-saving is needed. The safety knot is strictly required on the stirrup itself!
Weaving knot
If you need to connect two identical ropes with the same thickness, then the so-called weaving knot is perfect for this . Despite its simplicity, it refers to one of the most reliable. And therefore recommended for compulsory study.
To tie such a knot, it will be necessary: to guide the free ends of the two ropes to each other, at one end tie a simple knot, and stretch the free end of the second rope into the loop of this knot and hold around the root end of the first rope. Then the end of the second rope is also tied into a simple knot. Then both hinges are moved towards each other before joining together - and the knot is tightened.
Provided that the load on the knot can be quite strong, especially on wet ropes, then the weaving knot can not be untied after all - it is so tightly tightened.
Of course, it is not necessary to immediately try to learn all the nodes listed here at once. For starters, two or three basic ones will suffice. But to finish their tying it is necessary to full automaticity. And only then proceed to master the next.
Specialists also recommend not only to train in practice, but also to sketch out the scheme of knot tying yourself - this will help to better understand the principle of strapping, and will also promote lasting memorization.
Similar articles
Trending Now