How to build a fence with your own hands from the grid-rabitsy

For the construction of fences used a variety of materials. Continuous fences made of bricks, concrete or profiled sheets perfectly protect the site from extraneous views and wind. However, they have one drawback. Next to such a fence you can plant only shade-resistant plants.

Therefore, many homeowners prefer to arrange a fencing of a fence or grid-netting. Both types of fences are cheap and easy to install. The easiest way to do this is to use the rabitsu. Such a fence can be mounted in a couple of days. So, how to build a fence with your own hands from this material?

To date, various types of such a grid are produced. For the fence the material with a width of two meters and a wire thickness of 2.2 mm is most suitable. It is best to take zinc-plated steel. It will last much longer. Sometimes a painted mesh is used.

You can tighten it either between wooden poles dug into the ground, or use metal for this purpose. The choice of material in this case depends, first of all, on how exactly the fence will be used. For a temporary construction, you can do well with the first option. For capital use metal should be used. How to build a fence with the use of wooden poles? With due care, these supports can last up to 10 years. It will be best to take the pillars of larch. On the perimeter of the site, digging pits with depth not less than one third of the length of the support. The distance between them is usually 2.5-3 meters.

In order to build a fence from a mesh that can stand for a long time, the poles are previously cleaned of the bark and treated with antiseptic and fire-fighting compounds. The part to be installed in the ground is smeared with bituminous mastic. This will prevent it from rotting. You can take a regular beam and process it in the same way. At the bottom of the pits lay gravel and tamp it. After that, the pole is lowered there and covered with earth, which is also rammed.

The fence made of wire mesh with metal is, of course, more durable. To make it somewhat more complicated, but still easier, than, say, a concrete or brick fence. For this purpose, metal pipes are most often used . They do not rot like a tree, and they can be installed in the same simple way. The only thing - it is better not to fill them with soil, but concrete.

So, we continue to consider the question of how to build a fence with our own hands. In what ways can you attach the rabitsu to the supports? If a tree was used for the pillars, you can use ordinary nails. However, this option is not too reliable. To protect the fence is more durable, it is worth using burned wire. When using pipes, the grid on them is also fixed in the same way.

There is also a more complex and expensive version of the mesh fence device. In this case, it is fixed to the frame of the metal corner, and the corner itself is attached to the concrete pillars. However, it is quite difficult to make such a fencing independently. More often, similar structures are ordered in the companies specializing in this.

Now, most likely, you understand how to build a fence with your own hands using a mesh-netting. As you can see, it's not difficult at all. Such a fence perfectly protects the site from the penetration of animals and does not obscure planted plants.