How to assemble a homemade moped from improvised materials?

Today, trade can offer a large number of the most diverse models of scooters of domestic and foreign manufacturers. Before a person who wants to buy a vehicle, there is a huge choice. However, even with such an abundance of options, not everyone finds something that he likes. Someone does not like the size and weight of the car. He is looking for a more compact device, which can be placed, say, in the trunk of a car. Someone considers the design of modern "iron horses" not attractive enough. He wants to show his creativity and collect his own vehicle with his own hands. Such people are interested in how to make a homemade moped. Here are some useful tips.

What You May Need

In order to make a homemade moped, first of all it is necessary to determine the details that will be involved in the assembly. The basis of the design in most cases is an unnecessary bicycle. At once it is necessary to think over where all the details will be placed. The most cumbersome of them is the engine. It is usually located in the place of the rear trunk or in the lower part of the frame. If the frame has such a structure that the placement of the engine will create inconvenience when the moped is moving, then it can be done separately. This will require welding. Cook the frame follows from bicycle parts, which are specially designed for the appropriate load. If necessary, you can change the geometry of the desired part. To do this, use the stop and the car jack. The use of water pipes is strictly prohibited, since they do not have sufficient strength. Such a self-made moped will not go far. Mountings for the engine can be cut from sheets of iron with a thickness of at least 5 mm and weld them to the frame.

The motor of a moped

Then folk craftsmen usually go in different ways. Some use engines from agricultural machinery. For example, the mechanisms of motoblocks or chainsaws. Others collect a homemade moped using special bicycle engines. For example, the Chinese engine of the "D" series, or simply "dashka", is popular among technicians. What to use - everyone decides by himself. Perhaps, in the closet the old gasoline engine from the saw lies, and the hands are itching to place it somewhere. We must put it in a makeshift moped. However, the best advice here is to apply a standard cycling engine. So more guarantees of its reliability. The engine should be installed on the prepared fasteners. If a chain drive is used, the use of a standard bicycle sprocket is acceptable for torque transmission.

Brake system

It will be optimal to install a brake of the shoe type on the rear wheel. Due to the ease of the entire design of a powerful braking system is not required. The first tests of the new moped should be done with extreme caution. Filling it with fuel, you must first drive a few hundred meters, not strongly accelerating. In this case, you need to periodically test the brake system, making short presses on the handle. If everything went smoothly, the tests can be considered successful. After that, information on how to make a moped can be shared with friends.