Heating boilers "Cooper": technical characteristics and reviews

When building a private apartment house or cottage in front of the owner is the question of choosing a heating system. Its most important element is a heating boiler. There are many requirements for it: it must be reliable, economical, and safe. All these boilers are "Cooper".

Manufacturer Information

Universal heating boilers "Cooper" produces LLC "PKF Teplodar" from Novosibirsk. The company exists since 1997. Thanks to the fact that the plant is constantly working to improve the design of boilers, it introduces innovative ideas and carefully monitors the quality of its products, the goods manufactured by PKF Teplodar LLC are very popular with consumers.

Boilers "Cooper": purpose

From the name it is clear that the boiler is intended for heating buildings. The question is, which construction projects can be used for this product. Firstly, these are the sizes of buildings: from 100 to 300 square meters. Secondly, the type of heating system: water with forced or natural circulation.

Boilers "Cooper": interpretation of symbols

• "Kupper OK" is a heating boiler.

• "Kupper OVK" - boiler heating and cooking (equipped with cast-iron cooktop).

The numbers in the notation indicate the boiler output: from 10 to 30 kW, respectively. Based on these values, the area of the heated room is calculated: 10 kW - 100 m ² , 15 kW - 150 m ² , 18 kW - 180 m ² , 20 kW - 200 m ² , 30 kW - 300 m ² .

Technical characteristics of boilers "Kupper"

As a standard, the solid-fuel boiler "Cooper" has a TEN unit with a capacity of 6 to 9 kW (depending on the type of boiler) with a supply voltage of 220 V. The efficiency at work with solid fuel is from 75% to 84%, that is very high. The volume of the jacket of the heat exchanger is from 25 to 50 liters. The maximum permissible water temperature at the boiler outlet is 95 degrees. Boilers are equipped with thermometers TB-63, installed on the front or side wall.

Boilers "Cooper": the principle of operation

The operation of the boiler is the transfer of heat energy released by burning fuel, heat carrier (water). Cold water from the heating system enters the boiler through the nozzle in the lower part of the side wall, heats up the pipe grid and enters the heating system at the top of the boiler through the supply chute.

Additional options

Any solid fuel boiler "Kupper" can be converted to gas or pellet without carrying out complex welding operations. PKF Teplodar produces gas burners AGG-13K and AGG-26K with a thermal output of 13 kW and 26 kW respectively, specially designed for Kupper boilers.

Owner feedback

The first thing that attracts the consumer is the "price-quality" ratio. The products of PKF Teplodar LLC are optimal. The next plus is the dimensions of the boilers. With such a high efficiency, they are not great at all, for a house of up to 100 m ^{2 it is} enough to have a boiler room with an area of 5 m ² in order to accommodate all equipment in it. It is also valuable that the "Kupper" boilers are perfectly regulated power: when the furnace is fully loaded, the boiler installed at minimum burning maintains a temperature of 70 degrees in the heating system until 3 hours. And it's on the wood! When using coal, time increases. It is noteworthy that many owners after the end of the boiler's life are going to buy a new one again from Teplodar.