Gas convectors for cottages: reviews, which is better

Gas convectors for dachas are used today more often. As their distinctive features is the absence of noise and economy at work. Devices are not only suitable for country houses, but they show themselves well in the conditions of apartments. To purchase, you need to learn more about the criteria for choosing these devices, as well as to consider reviews of some models.

Reviews about features

Consumers like that liquefied or natural gas can be used to operate gas convectors. To change the type of fuel it will only be necessary to reconfigure the gas valve. The convector can be used as a backup or main heat source, while the air temperature in the room warms up to 38 ° C.

Buyers emphasize that they like the choice of power, which lies in the range of 2 to 6 kW. In instruments of this type, temperature sensors are usually used for heating, which allow controlling the temperature regime. If there is a fault in the gas supply, the valve blocking the fuel supply will operate.

Additional advantages

As the main advantage of gas convectors, consumers note the economy. The heat losses during operation of this device are minimized, which saves on heating the premises. However, there are drawbacks, as one of them, consumers emphasize the need to drill the holes that are required for the installation of the chimney system. It will also require the formation of a branched gas distribution system around the house, which is true if the equipment is operated from the main gas.

Which convector on gas fuel to choose

If you are interested in gas convectors for dacha, then you must first determine the type of fuel, as discussed above. It is important to consider whether liquefied or natural gas is more profitable in your region. It is important to pay attention also to the length of the gas pipe, because this parameter should not be less than the thickness of the wall, where you will make a hole.

When choosing a particular model, it should be borne in mind that some of them have a fan. If you plan to install a convector in a room that does not require permanent heating, then it will be more practical to use equipment with a fan, then when it is better for a residential type to purchase a model without a fan, since it will work without producing noise at all.

Recommendations for choosing a particular model

If you are considering gas convectors for cottages, then you need to pay attention to some models of similar equipment. For example, "Zhitomir-5 KNS" will be able to cope with heating the room area of 23 m ² . In addition to the rooms it will be possible to install a convector of the brand "AKOG-2.5", which has a cast-iron heat exchanger. Such a decision must be adhered to if you want to sleep in silence. However in this case it is necessary to overpay approximately 1800 rubles.

Quite often in suburban homes today you can find gas convectors with balloon gas for dachas like "Uzhgorod AKOG-4-SP". This option is a great warm room, but in time can lose the appeal of appearance. However, consumers emphasize that this does not affect the efficiency of the work.

For the owners of suburban real estate, which often live in such houses, the gas convector DEMRAD NGS-30, which does not have a built-in fan, will perfectly suit. Two rooms, each of which has an area of 16 m ² , it will be able to heat. Gas heaters-convectors for cottages are quite often chosen by consumers for the reason that they do not require grounding at connection, in addition, it also attracts a price that is 6500 rubles.

To fully warm up the house it will be enough to turn on the equipment and leave it. After 12 hours the house will warm up evenly. For more efficient operation, it is recommended to connect the equipment to the main line, so as not to worry about the need to change the cylinders. Owners of houses with three rooms argue that heating with the help of such a convector will be very profitable. But if the house is somewhat larger, it is better to take advantage of the possibility of installing boiler equipment.

Feedback on some selection criteria

Considering gas convectors for cottages, it is necessary to pay attention to a number of criteria. For example, to determine the required power, a formula is used that states that a kilowatt of power is required for every 10 m ^{2 of} the room area. This is true if the height of the ceilings does not exceed 3 m. Consumers are advised to add 1 kW to the design capacity, which is required to ensure that the equipment does not work for wear, and the owners had the opportunity to ventilate the rooms, opening the windows and doors.

Gas heaters for cottages (convectors) must also be selected with regard to the material of the heat exchanger. The most durable, according to customers, are appliances with combustion chambers made of cast iron. They allow to achieve an even warm-up and have a higher coefficient of efficiency.

Consumers also see the shortcomings of such devices, which are expressed in heavy weight in comparison with analogues with steel chambers. Among other things, this unit will cost about 50% more expensive, and devices are produced in a rather limited range of power, ranging from 2 to 5 kW.

If you prefer a steel appliance, its power can be 12 kW. Consumers say that such appliances for heating look better, are cheaper, but less durable. You can not ignore the choice of the type of chimney. There are many models on sale with a telescopic type coaxial tube , which makes it easy to adjust the length. In the case of horizontal chimneys, they may have different diameters, depending on the power of the device. Consumers advise to choose the units that have a chimney with a decorative outer casing, because it gives the equipment aesthetic appearance.

Reviews of some models of gas convectors: Alpine air NGS-30F

The above-mentioned gas convector for dacha, reviews about which are the most positive, costs 25,400 rubles. It has a cast-iron heat exchanger and provides quality long-term work. A fan is built into the chassis, which, according to customers, makes it possible to accelerate the spread of heat.

Control of work is provided by a mechanical system. Customers like that the dimensions of the device are very compact and equal to 630 x 230 x 460 mm. Weigh equipment is only 27 kg, while the power is 3.75 kW.

Reviews of the convector of the brand Hosseven HBS-12/1

If you are interested in gas convectors for dacha, which is better, reviews will let you understand. Among others, consumers choose the model that was mentioned in the subheading above. It is used for heating of premises for different purposes. Their area can reach 96 m ² . Consumers emphasize that this equipment has stable legs, and for burning the flame you can watch through the window, which is made of heat-resistant glass.

The thermostat in this device is mechanical, which indicates its durability. But this is not a complete list of advantages, among others it should be noted:

• Convenience of management;
• Vertical chimney;
• Open combustion chamber;
• Piezoelectric ignition;
• A small gas consumption, which is 1.12 m ^{3 /} h.

Conclusion

Gas convector heating for cottages can be an excellent solution for the arrangement of a reliable heating system. Consumers choose these units for the reason that they are small in size, economical in operation and completely safe.