Decorative well of tires with their own hands: description, interesting ideas and reviews

A country house or a summer residence should set up its owners for a full rest in harmony with nature. Therefore, the owners of such real estate are paying much attention to the arrangement of their garden. It will be nice to take a walk, sit at a table on the veranda with friends. The view of the site should please the eye.

. One of the best decorative techniques will be a well made of tires made by oneself . It can be decorated according to your taste. It harmoniously complements the cozy atmosphere of the courtyard of the private house. How to build a similar object, will be discussed further.

Features of the structure

сделать достаточно просто. The well of tires on the dacha with their own hands is quite simple. Almost everyone will cope with this. In the process of registration of such an object it will be necessary to show imagination. Since such a well is an exclusively decorative object, it must harmoniously fit into the general view of the country house site.

It is not advisable to get water from such a well. But to use it as a flower bed will be more than appropriate. The bright design of the well will emphasize the beauty of the garden flowers. In this case, it will not be difficult to choose a location for installation of the facility.

Material for the construction is also available to every car owner. Old tires are used to create many sculptures. The well is one of the simplest varieties of decorative landscape art.

Functional features

не может выполнять функции полноценного объекта для добычи воды. As already mentioned above, a decorative well made from tires can not function as a full-fledged object for water extraction. However, such an object can not only decorate the site. Quite often such objects help to close unseen sewer hatches in the garden.

The well can be used as part of the drainage system. In this case, you can create the right conditions for the growth of many crops and garden plants. This is a more complex system.

A water tank can also be stored in the well. The roof of the well will protect the container from getting into it leaves, dirt and dust. The well can be used not only as a flower bed, but also as a lamp. Inside such a system, you can install a light bulb and cover it with a beautiful bubble. In this case, you will get a beautiful composition that will decorate the garden not only during the day, but at night.

Stages of work

сделать достаточно просто. A simple well of tires with their own hands is easy enough. For this, it is necessary to carry out three consecutive stages of work. On the first of them the necessary materials and tools are selected, the right place for placing the building in the garden is selected. After this, a construction of 3 tires is constructed.

At the second stage, the anchored elements of the future well will need to be formalized. To do this, apply paint or other improvised materials. Here you need to use the maximum imagination. The decorative design of the building should be in harmony with the overall style of the exterior of the house.

At the third stage, you will need to build a roof. It can have different shapes. For its construction, it is not necessary to have special building skills. All the stages of work can be done in 2-3 hours. This will require the preparation of an appropriate tool. For more complex designs, another technology is used.

Tools and materials

, необходимо начать с самого простого способа. When considering ideas how to make a well of tires with your own hands , you need to start with the simplest method. It will need to prepare 3 old tires. In addition to the main component of the structure, two logs with a cross section of 10 cm and a pair of bars of 1 m are required. Four 4-meter lengths of 1.5 m should be purchased. A support for the well will be built of these elements.

Also need to be boards for the roof. A lot of construction materials will not be required. It is enough 6-8 boards. All the elements will be assembled with the help of self-tapping screws, metal corners and nails. Therefore, they should also be prepared in advance.

If you plan to paint the shell of the well, acrylic paint is purchased. You can buy a few multi-colored jars. If a flowerbed is to be built in the well, pots for flowers will be needed. After the preparatory work, you can start building a well.

Construction of a well

можно очень просто. Make a well of tires with their own hands for flowers can be very simple. In each tire, it is necessary to make holes for the support bar. It will also install a roof. The slots should be made as precisely as possible in order to avoid the displacement of the structural elements.

The first tire is put on the ground, making appropriate marks. Here, small pits are dug out for support posts. The base under them can be concreted. Posts can be installed outside of the tires. This greatly simplifies the work.

If the owners still decided to make slots in the tires, then the tires must be put one on top of the other. The holes cut through earlier must completely coincide. Further through them stretch a bar. Both bars should be of equal height. Otherwise, the roof will be uneven. Further, the supports are installed in the ground and drop them. The design should stand firmly on the ground. The area under the well must be level.

Roof

должна выглядеть максимально натурально. A flower-well of tires with its own hands should look as natural as possible. Therefore, for its creation, it is recommended to take the usual building materials for the roof. It can be simple boards. But the form must be appropriate. Nice looking gable roofs. However, you can make a flat variety of flooring.

Between the beams it is necessary to install a crossbar. You can also make a lattice. It will install a roof. In this case, it will be easy to fix the tiles, boards or other sheet material on the supports.

If plywood is to be used, it can be covered with a roofing felt, metal roofing, bitumen tiles, etc. You can make a roof of the same tires. To do this, the tire is cut in half, and then divided into 3 equal parts. Of these, a canopy over the flower bed is made.

Painting

практически готов. Well of tires with their own hands is almost ready. Now it can be painted on your own. When choosing a means for the formulation of tires, oil enamel can be preferred. However, experienced summer residents say that such a paint will not last long. It has to be updated almost every year.

A good option for painting tires is bitumen and acrylic paint. Well-proven rubber paint. It has received such a name because of the ability to easily stretch and contract under the influence of temperature. This paint provides a reliable coating that does not crack for many years.

The surface must be prepared for painting. It is cleaned with water and soap solution. Further, the tires should be dried and treated with a degreaser (acetone, alcohol, gasoline). With the help of a wide brush, the paint spraying paint is applied. You can use aerosol type. When the paint dries, you can paint the tires with a pattern. After completely drying inwards, flowerpots are placed on the stand.

Sewage well

Some owners of a country house decide to create a sewer well of tires with their own hands. In this case, construction will require minimal investment. The structure is created simply and quickly, it will not be necessary to apply special equipment.

However, there are drawbacks to such structures. The system is relatively short-lived. For more than 15 years it can not be exploited. The mobility of rubber does not allow the elements of the system to be sealed. Over time, an unpleasant smell appears on the site. It will not be possible to repair such a well. The entire procedure can be performed again.

Such a well will be deepened by 1.5 m. The upper tire will protrude outwards. Decorative functions of this design will be minimal. Specialists recommend using special building materials for such purposes.

Drainage well

If there is frequent bogging of the soil on the site, it is necessary to provide a quality drainage system. For this, channels are made. Collecting excess moisture will be a drainage well of tires. сделать подобную конструкцию будет несложно. It is not difficult to make such a construction with your own hands . All channels can also be made of tires. However, it is easier to use plastic pipes for this purpose.

At a water discharge point, a pit of 1.5-2 m depth is made. Its walls should be 30 cm wider than the diameter of the tire. They are installed inside. Sealed fixation is possible with cement mortar. In the top cover make a hole for the pipe. The same wells can be done in places of collection of stagnant water. Similar structures also do not perform any decorative functions.

каждый хозяин загородной недвижимости сможет сделать декоративную или функциональную постройку в соответствии со своими нуждами. Having considered how to make a well of tires with their own hands, every owner of suburban real estate will be able to make a decorative or functional building in accordance with their needs.