How to make a torch yourself, tips and tricks

The torch has long been considered a multi-valued symbol of fire, life and light. Various facets of this symbol are reflected in the fine arts, iconography and emblematics. It's not difficult to make a torch with your own hands, the main thing is to be focused on the business in order to protect yourself from danger. After all, there should not be other consequences, except for the desired qualitative result.

How to make a torch of their simple materials

The torch is best done on a stick with a diameter of 2 - 5 cm. For winding, use a cut-off patch or any cotton cloth. Pakluk can be purchased at any construction store. Wax for a torch is sold in the same place as honey. Rosin is better to buy in the electronics store , and not in the usual economic department. You will also need a small amount of twine or hemp rope. To make a torch mixture, take the dishes, which is not a pity to spoil. It will also require something like forceps or tweezers.

Consider all the subtleties of work

How to make a torch, having spent thus a minimum of time? First, you need to grind the wax and rosin in order to speed up the melting. Primary heating and kindling is carried out in some vessel on the stove. The process will be faster if the mixture is constantly stirring. After complete kindling, put the mixture on a water bath, in order to prevent thickening. Then immerse the tissue tape in the molten liquid mixture, it must completely wet. It is better to lay the tape according to the accordion principle of paper. After impregnating takna, we take the tip of the tape with tweezers or forceps and wrap it around the stick. Try to ensure that when winding, there is no excess mixture, otherwise the torch burning will drip strongly. With wrapped 3 - 5 strips, the torch will burn for about 50 minutes. Then tightly wrap the dry tape on the product, which will absorb the excess mixture. Approximately 15 cm from the edge of the fabric, on the torch you need to wind a few twine twine or hemp rope. This is done in order to save your hands from a burn if drops of the mixture run down the handle.

Valuable advice

How to make a torch, thus protecting yourself and others? It is enough only to observe the safety techniques when using and manufacturing it. First, be careful and attentive when grinding wax, rosin and cutting ribbons. Handle the tools with care, do not hurt yourself. You need to set the torch from the top. The process can be slightly simplified if you pre-burn the surface of the flame in a flame to black.

Warnings

Remember, work is carried out with the heated mixture. To avoid getting it on your eyes and body, wear protective goggles and special clothing. It is also better to cover the floor near the plate with a newspaper. Do not place flammable objects near the cooker. Do not hold a lit torch near your face. Beware of burns that you can cause yourself and others. The extinguished torch must be filled with water, even if there is no open flame.

Now you know how to make a torch yourself. Use materials carefully and carefully, so as not to harm yourself and others.