Crafts from newspaper tubes themselves: a Christmas tree, a cock, a star, a casket

Accumulated in the house a lot of newspapers and magazines? Do not know what to do with them? Just do not rush to throw! Souvenirs from newspapers are a great way to decorate the interior. Have you heard anything about this hobby, like crafts made from newspaper tubes? With your own hands, you can create real masterpieces! It's just an ideal material for creativity. It is not difficult to master newspapers from newspapers, and children can participate in the process. Just the case when nobody will scold anyone for spoiled material!

This direction of creativity in recent times has become more than popular. Having understood the basic principle of weaving, you will create a lot of interesting things. Unusual hand-made articles from newspaper tubes are now in vogue among the craftsmen. These are vases, and figures, and baskets - up to the furniture. But first of all the material needs preliminary processing with the creation of blanks.

We make a newspaper

Lovely wicker decorative elements, many would not refuse to decorate the interior, but real products from the vine are not cheap. Help crafts from newspaper tubes. With your hands, with the proper level of skill, you can build truly luxurious souvenirs.

First of all, it is necessary to prepare the working material, that is, the tubes themselves. To make each of them, narrow paper strips are wound on the knitting needle. Billets try to stock up more. What is needed? In addition to the newspapers themselves - a spoke, colors of the right colors and a bottle that has a wide neck.

Technology of work

Many, many newspaper pages are the basis of any crafts made of newspaper tubes. With their own hands they are easy to cut, do it better across the sheets, the longitudinal ribbons will come out unnecessarily long for a neat folding. A knitting needle, wrapped in such a strip, twists a tube. As a result, we must have a certain number of thin long blanks.

While our tubes are rather plain - gray. And you want to color them in the colors we need. Do it better before weaving, so as not to spoil the finished product.

How to color the workpieces correctly

We need a lot of pipes, paint them for a long time, but here's a secret from real masters - the water diluted with water is poured into the bottle by more than half the volume. Then a pack of harvested tubules is inserted into the neck, closing it tightly. The bottle is sharply shaken up and down, while the paint does not leak and does not splatter due to the tightly sealed neck.

Or tilt the container once, while the lower half of the workpieces are stained. Then the tubes are removed, inserted into the bottle by the other side and the procedure is repeated. Thus, the work goes pretty quickly, and during, for example, half an hour, you can get several hundred pieces, which is enough for a large product.

How to make a casket or a basket of newspapers

The simplest work of this kind is a container in the form of a square. For example, artifacts from newspaper tubes casket and basket are considered the easiest. The design, which has the right form, is easy to manufacture and ideal for beginners. On it you can train and children.

What to take? The wrapped tubes themselves (qualitatively painted), a small-sized cardboard box, scissors and glue. First of all, several preforms are glued to the square base, for which the ends need to be fixed on it with intervals between them about 1.5 cm.

How to interweave a newspaper vine

Then the newspaper sticks are bent in such a way that they are pointed upwards. After preparing the base of the box or basket, we take up directly for the weaving. We take one of the sticks and alternately pass between the vertical tubes from different sides. The workpiece ends - we attach to it the next one (put on top), for reliability, dropping a little glue of PVA. So little by little all the prepared tubes are woven into the product.

When the desired height is reached, the tip of the last tube is hidden, all the excess is cut off and fixed. The result is an interesting casket.

In the same way, the cover is also made for it, then the capacity is suitable for storing all sorts of useful trifles. In a casket or a large-sized basket it is convenient to hold the coils of thread for knitting.

From simple to complex

Having perfected the skills of work, you can go to products of irregular shape. Individual craftsmen are finding new ideas. From newspaper tubes - such seemingly uncomplicated material - they manage to create simply incredible vases, and from thick and sturdy tubes - pieces of furniture. For example, the original shelves for light souvenirs.

Extend the service life of such products, covering them additionally with varnish. After a little practice, you can achieve a surprising resemblance to a real vine.

Make a Christmas tree of newspaper tubes: a master class

The festive Christmas tree will decorate the interior during the winter holidays and give a good mood. The reason for such crafts can be a homework assignment to the child in school at the lesson of work. The scheme of the Christmas tree is quite simple, it does not require a lot of time and money. Decorating it is easy - a flight of fantasy in this case is not limited.

In addition, the creativity of your baby will be further developed, as well as small manual motor skills. A ready-made Christmas tree is set up from newspaper tubes anywhere: on the dining table, verandah and even in the car.

Getting Started

In the beginning, as always, we prepare everything we need. These are tubes made of newspapers, a sheet of thick cardboard (the shade is not important), a well-grown simple pencil, sharp scissors, watercolors or gouache (paint colors are comfortable), as well as glue-pencil (alternatively PVA).

Begin to do any artifacts from newspaper tubes with their own hands, recall again, from winding narrow strips of newspapers on a long and thin needle at an angle of 45 ° and fixing the glue of each tip. After drying, remove the needle, the dried tubule is painted in a conceived color. Spectacular will be a golden or silver hue herringbone.

Cone base

First we prepare the cardboard basis of the product. The dense sheet is folded and fixed using PVA in the form of a cone. Dimensions of it - at your discretion. The second sheet is used to cut a circle of the appropriate diameter - as a bottom. From above, an even number of newspaper tubes (in the form of sunrays) are glued to it. To glue the adhesive more securely, it is recommended to press it down with a press.

Put the prepared cone in the center of our sun. Now you can go to the actual weaving of the Christmas tree.

One option ...

This can be done in many ways - there are quite a few of them. First: similar to weaving a basket. Along the standing cone, the rays are raised (you can temporarily strengthen it with a rubber band), then a new tube is flown in a circle between the beams.

After making 5 or 7 circles, the tip of the tube is removed and fixed with glue. The rays cross over, then weave the next circle with a small retreat. So we reach the very top. The rays no longer cross. We fix the ends, we remove the lower circle, the tips of each ray are turned inwards.

... and the second

Another way is also simple. The base is the same, but the rays do not strengthen the rubber band. Weave counterclockwise. The new tube is weaved, shifting and fixing from the previous one, the next one - in exactly the same way. So on a circle to the top.

Decorated with a Christmas tree from newspaper tubes is very interesting. If before the beginning of the weaving you did not begin painting the blanks, you can now spray on our hand-made spray paint. On the top of the dried fir tree we put an angel or a star (how to make it, we will tell below). Instead of balls we take shiny colorful beads. You can even wrap our Christmas tree with a blinking garland.

Rooster from the newspaper tubes

Materials for manufacturing are the same as in previous descriptions. And the technology of work looks like this:

1. Cut the newspaper into strips, screwing the right number of thin tubes and coloring the bright "cock" colors, we put together ten pieces. One of them, which is in the middle, is twisted three times around the bundle, which is divided in half. The tip stays sideways.

2. Both halves are braided in the form of an eight. One of the beams is the tail of our cockerel. Pipe straighten and flatten. The second is the neck, it is braided by the end of the same middle tube.

3. We craft the clavic craft, bending it in the middle and weaving it into the neck. Above him we make three more turns, we hide the tip.

4. The stand is made from a separate workpiece, winding it onto the lower part of our beam and fixing it with glue. Take the knife and cut the protruding tips. In the middle part of the figure we should have winglets, they are made of three bent multicolored tubes inserted into the spiked hole. The cock from the newspaper tubes is ready!

New Year continues

It's time to decorate our Christmas tree. And what is traditionally decorated New Year's beauty? That's right - a star. And now we will tell you how to make it.

The star from the newspaper tubes is made in the following way: we store about 10 blanks, a ruler, PVA glue, water-based varnish. We will also take clothespins to keep the tubes in the process of weaving.

Craft a Christmas tree

As in other products from newspaper tubes, the master class begins with the preparation of the material. Let's get started. Screwing the tubes from the notebook sheets or unnecessary newspapers and painting, we glue three of them together into one long workpiece. We mark the ruler of the mark about nine centimeters from each other. Then proceed to the formation of the star. At each mark, we bend the tube so that a figure appears in the form of a five-pointed star.

Having received all five rays, fix the joint with glue and a clothespin. Then we continue the work, repeating in parallel the second row, which is pressed tightly against the ready-made clothespins. Tops are braided. You can build up the third row, but for a larger number of segments should be larger. Then the working tube is cut off with the tip hiding.

Final touches

For strength, the finished star from newspaper tubes is smeared with glue and covered with a layer of varnish. It is recommended to sprinkle the toy lightly with multicolored sparkles. Such an asterisk can be presented as a souvenir to a relative or friend. And you can decorate it New Year's interior, for example, hang by the fireplace with red boots. Winter articles made of newspaper tubes leave a wide space for a variety of ideas. In a word - fantasize!