Construction of a wooden house. How many bars are 150 to 150 in the cube?

Today there are quite a lot of different building materials. Among them there are cheap, and expensive. All of them have their advantages and disadvantages. Recently, a profiled beam of the 150th section has become very popular. What are the features of this material and why is it increasingly used in the construction of residential buildings? What advantages does the bar 150 * 150 have? How many cubic meters of this building material? About this later in the article.

Short description

Increasingly, natural materials are used for building houses - a tree. The increased demand for it is due to its qualitative characteristics. Among the advantages it is necessary first of all to note heat resistance, good sound insulation and, of course, bearing functions. The bar 150 * 150 has a square section, which is optimal for the construction of a summer house or a bath. Shrinkage at houses constructed from a bar of this size, is minimal, since when drying in special apparatuses there is a strong connection of logs with each other. This excludes the appearance of any cracks. Therefore, such structures have a long service life without repair. Due to the ability of the tree to breathe in such houses there will always be a fresh smell. At ordinary buyers there is a quite natural question: "How many bars 150 on 150 in a cube?" After all, it is important to know when starting construction. But first things first.

Classification

The profiled beam is a natural material that is made from coniferous or hardwood wood. Its classification is carried out in accordance with the technology of processing and preparation of raw materials.

1. The sawn timber is made from round logs of natural moisture. They are at the enterprise undergoing minimal processing. Next, square blocks of different cross-section are cut out of them.

2. Planed timber - the plant goes through the drying process until it reaches 25% moisture. After treatment, the surface becomes smooth. To increase its thermal insulation properties, a horizontal hole is made inside the bar.

Benefits

For the erection of a two-storey or single-storey house for permanent residence, the profile bar 150 * 150 is considered an ideal option. After all, it has high strength. The planed bar size 150 * 150 is made of solid wood - spruce or pine. These rocks are less exposed to mechanical stress, which determines the high quality of the material. The walls of the house, made of a bar of 150 * 150, will cost less than those built from concrete or brick. And you can fill the foundation with the money saved. Wooden walls keep the heat better. This is due to low thermal conductivity. Construction of a wooden house can be conducted at any time of the year. The erection takes a relatively short period of time. To build a room from a bar 150 * 150 will take less capital than if you use a larger material. Many choose a smaller tree for the construction of a residential house, and large bars (200 * 200, for example) are used for the construction of bearing walls or wells.

Calculations

If we calculate how many bars 150 to 150 are in the cube and compare the result to the amount of material of a larger size, then the difference will be significant. Of course, the smaller the cross-section, the more units will be required for construction. Accordingly, it may seem that much time will be expended on erecting the structure. Well, there is some truth in this. But ultimately it all depends on the preferences of the owner of the future chorus. In addition, weight is also important. The smaller the cross-section, the correspondingly, the material should be lighter. So, let's try to calculate how many bars 150 to 150 in the cube. To get the material, of course, better cubic meters. It is known that the length of one piece of lumber is 6 meters. In one cube - 7.4 pieces. But we must understand that it will not be possible to cut 0.4 timber. In this regard, the result should be rounded. Why do you need to know how many bars 150 to 150 are in the cube? Elementary: not to overpay, buying more, or vice versa, not to get less material than necessary.

Related Materials

The timber, which has a section size of 150 * 50, by definition can not be a bar. But after all, it is also used for building a house made of wood. Often such a material is called a bar, although in fact it is a board. The final price of it depends on the type of wood and the percentage of moisture content. The boards are widely used in the construction of wooden houses. Often the bar 150 * 50 goes for the manufacture of rough floors, which are covered with the first layer. But the main use of the board is separate constructions. For example, they are irreplaceable when the roof is lined. In this case, sawn timber of such a section is used as lags. Since their weight is less than that of the beams, the boards are often stacked instead of beams for overlapping. From the same tree, only the second grade, temporary structures are built, store rooms. Due to the extreme strength and light weight of the board of the second or the remains of construction materials of the first grade are used for the manufacture of formwork.