Compact folding bike Strida. Prices, analogues, reviews of Bicycles Strida

The company "Strida" in 2002 struck many people with a new line of compact bicycles. They were created special for city trips. A distinctive feature of these models is considered to be an A-shaped frame. Brake systems are most commonly used disk type. Steering columns for today are the most diverse. At the price of bicycles firm "Strida" is not much different. Average model of the above brand in the region of 50 thousand rubles will cost.

Overview of the "SD-2 SDID"

This small collapsible Bicycle Strida brake has a disk type. The pads of this model are used by the series "Avid". Special attention in the presented bicycle deserve the flu. In total, they are installed two, and they are used series "Bond". Pedals in this case, the manufacturer provides for plastic. Seated pipe diameter is included in the kit 2.3 cm. The saddle at the bike "Strida SD2" is used with a spacer. The cassettes of the presented model are of the "C970" type. These bicycles (Chinese) Strida are worth about 54 thousand rubles on the market.

Reviews about the bicycle "Strida SD2"

This bike Strida reviews has good. To date, this model is in high demand. For trips to work, it fits perfectly. However, it should be borne in mind that the wheels on it are set to a small diameter, so it is uncomfortable to move around uneven terrain on the "SDD2" model. The brake system in this case is used rather reliable. Also, many buyers are pleased with the fact that the saddle is very easy to adjust. It is also possible to adjust the steering column. Cassettes in the bike "Stryda SD2" break down quite rarely, but there are still disadvantages. First of all, we should note the rapid wear of the sprocket teeth. In addition, the owner may have problems with the carriage.

"SD3 Stream" model parameters

This Strida bicycle is equipped with an A-frame. The brake system in this case is of a disk type. Pads in the presented model are applied series "Code". They wear very slowly. Grips in the modification of "Strida SD3" by the manufacturer are provided for the type "Bond". The seat tube at the bicycle is provided on two supports.

The asterisk, in turn, is set to a thickness of 2.1 mm. Also it should be noted that the modification of "Strid SD3" is equipped with rocking machines. The tensioner in this case is missing from the model. It is worth mentioning the bicycle Strida in the region of 48 thousand rubles.

What do they say about the model of "Strid SD3"?

This bike Strida reviews deserves a positive. This model has many advantages, and, first of all, it should be noted, of course, its compactness. It is quite easy to stack it and transport it in the "Strida SD3" car without any problems. In addition, note the low weight of the presented model. The steering column in this case the manufacturer provides a wide.

Due to this, it is possible to manage the model of "Strida SD3" in urban conditions with great comfort. The saddle is also convenient, and the owner can adjust its height. Rocking in this case are used on two flanges. If you believe the reviews of consumers, then they wear out very slowly. The disadvantages of the presented bicycle are practically absent. However, it should be noted that the mantles are flat and they are not adapted to large loads. Thus, to overload the bicycle Strida SD3 in this case is undesirable.

Characteristics of the bike "Strida SD5"

This Strida bicycle from other devices is different in that it uses a protection for an asterisk. The chain tensioner in this case the manufacturer provides a series of "Herbs". In turn, the rockers are used standard. The switch at the bike "Strid SD5" is missing. The cassettes in this case are of the class "C970". The carriage at the bike "Strid SD5" is installed quite wide. Loads it is able to withstand large. The saddle of this model is located on a strong manket. Its diameter is 3.3 cm, and the thickness is 2.2 mm. Frame for the model "Strida SD5" is used A-shaped.

The steering column is provided by the manufacturer of the series "Pris". Special attention in the attached bicycle deserves the brake system. In this case, it is a disk type. In turn, the pads are installed in the "Code" class. Strokes from the bicycle "Strid SD5" are used plastic type. It is worth this modification to date about 51 thousand rubles.

Consumer feedback on "Strida SD5"

Many people believe that for city trips this folding bike Strida fits well. The carriage at the presented copy is used rather qualitative. If you believe the consumers' reviews, then the asterisk is erased extremely rarely. Special attention in the bike "Strid SD5" deserves the quality of the cassette. It is installed in this case of a flat type. In this regard, it is not erased when riding.

Another advantage of this modification can be safely called the presence of a tensioner. In service, the Bike "Stryda SD5" is quite simple. If necessary, the flu can be cleaned easily. In this case, the saddle is disconnected without any problems.

Description of the model "Strid EVO 5.2"

Buckets from this bike manufacturer provided a plastic type. Rotors, in turn, are used with one fixing nut. Also this model differs from other devices with a dual cassette. In this case, it is of the flat type. The tensioner for the model "Strida EVO 5.2", unfortunately, is absent. The biker's rukings are mounted on two flanges. The switch in this model is standard and does not stand out.

The cuffs are used with a rope and are fairly compact. The saddle comes as standard with a spacer. Special attention in the presented model deserves the type of the steering column. It is installed quite wide and it can be adjusted in height. In this case, the pedals are of the contact type. Rubber covers are applied on them. It is worth for today the bike Strida 5. 2 about 51 thousand rubles.

Customers' opinion about "EVID 5.2 Stridow"

The advantages of this model are obvious. The saddle is used high quality and almost does not wear off. If you believe the reviews of consumers, then the control during the trip feels good. In this case, the rocking machines are quite broad in this case. The asterisk is sturdy and the denticles wear out extremely slowly. Special attention in the presented model deserves a solid frame. It is made in the factory from a special alloy of aluminum and a big man will survive without problems. It should also be noted that the pads are used in the Avid series. Today they are in great demand because of their strength.

Characteristics of the model "Strid LT5"

The pedals indicated by the Compact folding bicycle Strida are of contact type. The frame in this case is installed with a circular cross-section and loads can withstand large ones. The brake system of the presented model is available on two flanges. Rotors in the bike "Strida LT5" are installed with a protective nut. Brake pens manufacturer provides a series of "Code". Particular attention in this model deserves the bowden. They are established at this copy rather wide.

The manufacturer provides plastic removals and the muffins are rarely erased. In turn, the strains of "Strid LT5" have a diameter of exactly 3.5 cm. The seat post is manufactured in a steel plant. Adjust its position is an opportunity with the help of rocking. The chain tensioner in the presented model is absent. It should also be noted that the switch is installed standard and works from cassettes. The asterisk in this case is used with a thickness of exactly 2 mm. It is worth mentioning the folding bicycle for the city of Strida to date about 48 thousand rubles.

Reviews of owners about the bicycle "Strida LT5"

In our time, these compact Strida bicycles are in demand in many countries. However, it should be borne in mind that they need periodic inspections. First and foremost, it is important to note that in this case the rocking machines are flat. Supports manket in this situation on a solid washer. Due to this, its wear and tear is extremely small. It should also be mentioned that the carriage has a diameter of only 2 cm. Due to this, it is rarely erased. If you believe the reviews of consumers, then the model "Strida LT5" is controlled at high speed well.

The saddle in the presented configuration is widely used. Despite the fact that the column is used plastic, it can withstand large loads. Even a child can adjust the seat tube. In this case, the bowls are of high quality. Also, the folding bike Strida LT5 from other devices is distinguished by the fact that the frame in its lower part is thickened. Thus, the probability of its deformation is extremely small.

Folding models "Bickerton"

The bicycles of this company are very compact. They differ from the modifications of "Strid" in that they are produced with different frames. To date, the market has many modifications with open shoes. In this case, the seat posts can be of different shapes. On average, the asterisks are about 2 mm thick. Of the shortcomings, we can safely note the rapid wear of the cassettes. In this case they are of the double type. Also of the disadvantages is important to mention the rapid wear of the pedals. The average model of the above-mentioned company will be around 46 thousand rubles.

Overview of the Bickerton M2

This bike is quite strong rokringami. In this case they are used for three flanges. The clamping ring is applied to them. The switch at the bike "Bickerton M2" is set to medium rigidity. Mancettes in this case, the manufacturer provides a series of "C50". In turn, the carriages are rather flat, and they are connected to the Bickerton M2 model directly through the bushings. The asterisk in this case has a thickness of exactly 2 mm.

The saddle manufacturer provides a series of "Cross". It is included in the standard kit with a spacer. The steering column of this bicycle is made in elongated shape. In this case, the handle is used with plastic pads. Due to this, the model is quite comfortable to manage. The seat tube diameter is 3.1 cm. The grips of the submitted specimen are applied by the class "Roll". The Bowden model of the Bickerton M2, unfortunately, is not available. It should also be noted that the bicycle's carry-outs are quite small.

Folding models "Orbea"

Bicycles of this company in size are quite low. It should also be noted that the frames they are most often used A-shaped. In turn, the steering columns can be found on the market a variety. Rotors on many models are used on two flanges. If to speak about advantages, it is necessary to note high quality of brake systems.

Bowden in this case are only used double. In turn, the removals can be found both plastic and metal. Individual attention in the bikes of the trademark deserve the flu. They are installed, as a rule, a series of "Crum". Many buyers give preference to models of the presented brand because of quality stars. It is an average model of this brand in the region of 45 thousand rubles. However, you can find cheaper options.

Differences of the model "Orbea 330"

Unlike Strida, the bicycle (Orbea's analogs) boasts a rather strong A-frame. In the lower part, the thickness of the metal reaches 2.3 mm. The tensioner in this case is provided by the manufacturer standard. In turn, the rockeries are used in the C50 series. The switch at the bicycle "Orbey 330" is of low rigidity and this should be taken into account before buying it. Managed this model in urban conditions is quite comfortable.

The brake system is installed in the Sore series and stands out for its smoothness. In this case, the bushings of this bike wear out extremely slowly. Pads manufacturer used only the class "Rore". The outlets in this case are of a plastic type. In turn, the high quality of the high-quality bugs can not. Seat tube diameter is 2.4 cm. The seat is fastened to it by an aluminum clamping ring. The bicycle "Orbea 330" (analogue of "Strid") costs about 51 thousand rubles.

Models "Kent"

Bicycles of this company in our time are in great demand. By compactness they are able to easily compete with the models of the company "Strida." Brake systems are most often installed on the rear wheel. Rotors are used for both two and three flanges. Pads in size are quite different. As a rule, they are installed in the models of the Race class. Plastic handles are produced directly, but they are washed very seldom.

A special attention at the bikes of the above brand deserves the quality of the bowden. At present, both double and triple modifications are on the market. Grips by characteristics are quite different. In turn, the removals are only plastic. Their thickness is on the average at the level of 2.3 cm. Pedals are often found contact type. Steering columns in width can be different. In this regard, the buyer can choose a comfortable model for himself without problems.

A saddle can often be found with a spacer, but there are models without it. The quality of the bushing deserves special attention. It is fastened on rather wide carriages and breaks extremely seldom. Directly the cuffs are used series "C40", and they are manufactured in an aluminum plant. A qualitative model will run around the consumer in the region of 50 thousand rubles.