Aran patterns with knitting needles with diagrams, photo and description of knitting of a man's sweater

Craftsmen who know how to perform the front and back loop will be able to cope with the Aran patterns with knitting needles. With schemes and detailed description, it will go quite quickly, it is enough to understand the main principle.

How does the formation of braids

Do not be intimidated by differences in terminology, since arans are also called plaits and braids. Intertwining strands are the key component of the Aran patterns with spokes. The diagrams that confirm this can be found below.

Each braid consists of at least two strands, which can be formed by any number of loops (from one to several tens). In the process of knitting the foreman transfers the loops of the first strand to the auxiliary spoke or knitting pin, then works with the loops of the second strand. After that, she returns the loops of the first strand to the left knitting needle and ties them. Depending on which side of the canvas (at work or before work) the removed loops of the first strand remain, the harness will be tilted to the right or left.

Traditionally, the harness loops are knitted with facial, and the background loops are purl, but there are exceptions.

Of the two braces, the simplest Aran patterns are made with knitting needles, with patterns that include a relatively small number of loops. More complex ornaments can be formed by a much larger number of strands: from three to several tens.

Knitting a man's sweater with a volumetric pattern

For such a product, a medium-thick yarn and matching knitting needles are required. Drawings for sweaters of different sizes are shown in the drawing.

Work begins with the details of the back, then perform in front of and sleeves. To determine the number of loops for the first row, knit and then measure the control sample. Knowing how many loops are 10 cm, you can calculate all the necessary parameters.

Aran patterns with knitting needles with patterns and description: a sequence of knitting sweater details

The figures, which are presented below, depict the schemes that need to be checked when working on a sweater.

Spin can not be decorated with braids, it will be enough to perform pattern A.1. After the hinges are typed, a 7-10 cm rubber band 2: 2 should be tied. Then go to the knitting pattern.

When the web is bound to the armhole line, it is necessary to cover as many loops on each side as possible to form protrusions of 3 cm. Next, to form the raglan lines in each second row (for example, in the front row), two loops are cut. For a neat edge, you need to tie together the second and third loops, as well as the two penultimate ones.

In this way, the bevels are arranged at the right angle.

Knitting details are transferred

Before knitting is the same as the back. That is, the number of loops and rows before the armhole remains the same. The only difference is that the details will be placed aran patterns with knitting needles. The layout of the basic pattern and basic braids is located in the previous paragraph.

The remaining strands are shown in the diagram below.

The master can use the designer's development, embodying it unchanged or placing the aranas in his own way. For example, you can supplement the existing model with braids in the center of the gear part. To do this, the largest braid (Scheme A.3b) with small braids on both sides (A2b or A6b) is suitable.

Having reached the armhole line, the workman should cut on each side such a number of loops, which corresponds to 5-7 cm. The depth of the armhole on the detail of the transmission will be greater than on the back. Raglan lines are formed in the same way as when knitting the back: in each second row, two loops are cut.

Due to the fact that the armhole turned deeper, the lines of raglan will be shorter, and the whole detail is smaller. Due to this, the throat on the part will be deeper than the back.

Knitting Sleeves

For cuffs knit 5 cm elastic band, then go to the implementation of patterns. Here you can also take advantage of the designer's suggestion or place the Aran pattern with your knitting needles on your own.

In order for the sleeve part to expand to the armhole, two loops should be added at regular intervals, at the beginning and at the end of the row.

To form raglan lines, you should cut two loops in each second row.

At the last stage, all details of the sweater are sewn with a knitted suture. Then, on the circular knitting needles, the neck loops are typed and the elastic band is knitted to the desired height. If you only do a few rows, and then loosely close the hinges, you will get a pullover.

In the event that the neck is 15-20 cm, the product will be called a sweater.

For the loops to settle and the linen leveled, the product is washed in warm water or steam from the iron. When wet-heat treatment, the cloth with braids should be steamed from the wrong side. Otherwise, the bundles can lose volume and become flat.

Plaits and braids are very often used when knitting clothes for men. Aran patterns with knitting needles with diagrams, photos and descriptions are easily mastered by craftsmen. Their implementation does not require much experience or skill, but you must carefully monitor the order of the weave braid.