What is the purpose of the DEVI heating cable?

The heating cable "DEVI" is used to protect the pipelines from freezing, ice and snow on the roofs, downpipes and gutters. In addition, it is used to maintain the required temperature in hot water systems, technical installations, as well as to create a system of warm floors in living quarters. The main feature of such products is the ability to self-regulate the temperature, that is, the heat transfer decreases or increases depending on their heating.

Heating cable "DEVI": operating principle

Through the entire length of the cable between the parallel conductors (copper) is the temperature-dependent composition of the resistance - carbon polymer. When the product is connected to a 220 volt network, the current passing through the coal composition heats it. As a result, the polymer expands, and the distance between the coal particles increases, and this leads to an increase in resistance. As a result, the current decreases and the heating (power) decreases. The principle of self-regulation has been built on this principle. The heating cable "DEVI" is also interesting in that the heating control takes place separately over its entire length, taking into account the ambient temperature in each section. If the outside temperature increases, the power released by the cable will decrease. Due to the described effect, the heating cable "DEVI" is protected from overheating of individual sections where the temperature is higher. Due to the parallel connection of the supply voltage, it is possible to shorten it anywhere. This greatly facilitates installation and design. When calculating the use of such cables, it is necessary to observe the maximum power parameters for different temperature regimes.

Software and hardware "DEVICOM PC PRO"

Using self-regulating heating cables together with the specified hardware and software complex, you can fully control the heating in your home. Thanks to such a device, it is possible to control system settings and thermostat controllers that operate on the network using a conventional personal computer. Thus, you can set the temperature regime of the floor separately for each room, install heating of the roof and drainage channels, protect from freezing water and heating pipes. All information about each such object will be delivered to your computer.

Such a hardware and software complex will be very convenient for workers who perform installation work on installing self-regulating heating cables. The device will be able to detect system malfunctions.

This complex, connected to the network, reads and analyzes information from the temperature regulators for a few days. This allows you to determine the features of the operating mode of the system under test and create a temporary heating map. Thus, you can choose the most economical power consumption for this facility.

Conclusion

Using such a product as the DEVI heating cable, together with the DEVICOM PC PRO hardware and software complex, provides efficient heating in an apartment, house, office, industrial hall, gym. Install such a system is easy on any site, wherever you need a comfortable heat. These complexes can be installed both in new buildings and during the repair of old housing.