Warm plinth electric: reviews, photo, montage by own hands

A warm plinth electric is considered a completely new technology for heating residential premises. This system is based on the principle of convection.

general description

Outwardly, said structure is a box made of metal. Its height is 14 cm, while the width is 3 centimeters. Mounting is carried out directly on the wall in place of the traditional wooden or plastic analog. Inside, on special brackets, a heating heat exchange module is fixed, consisting of 2 copper tubes. They are fitted with brass lamellas. The heating modules are interconnected by the method of copper soldering or by means of crimping nuts. In the corners, the heat exchangers are connected by rotary tubes made of copper or polyethylene. Electricity is supplied to the plinth from the distribution manifold by means of pipes.

Reviews of electric skirting boards

A warm plinth electric is gaining increasing popularity among modern consumers. It works by means of an electric heater, whose power is 200 W per one running meter. Heating elements are connected together in parallel, while the mode of their operation is corrected by means of an electromechanical or electronic wall thermostat. The latter has a built-in temperature sensor. As the users note, this heating system is very effective, warm air, which rises along the walls, slowly gives its heat to the surfaces. On the walls and windows outside a special screen is created, preventing the outflow from the room of warm masses. The walls themselves can radiate energy, which is transferred to objects in the room, namely carpets, furniture and fabrics. According to experts, a warm plinth electric helps to warm up the room twice. The first time this happens at the expense of the device itself, while the second time is due to objects. Owners of private houses and apartments emphasize that this thermal effect promotes a uniform distribution of warm air masses around the perimeter of the room and the height. As practice shows, no heating device is able to achieve such an effect.

Feedback on efficiency and environmental friendliness

A warm plinth electric, according to experts, is not harmful to human health. Among other things, it can create a barrier to the path of cold air masses. The equipment heats the walls from the inside, and also from the outside, relieving the room of excess moisture. Mistresses emphasize that when using this heating equipment, the dust in the room becomes much less, as air moves much slower. It is impossible not to mention the effectiveness. Many owners of their own homes install such structures, completely replacing the rest of the heating equipment with the described. This is due to the fact that a warm electric skirting board, which is recommended to read about before making a purchase, can be used as the main heating system. If necessary, it can be installed on the terrace, balcony or balcony. Quite often this equipment is supplemented by other heating devices. Due to the unique design of the heating module and the connection via the collector, the difference between the temperatures of the return and supply lines does not exceed 5 degrees. This figure is 4 times less than in traditional systems. Due to this, it is possible to significantly save energy and fuel.

Safety reviews and space saving

Warm plinth electric, reviews about which it will be useful to read before going to the store, provides a uniform distribution of heat throughout the apartment. Among other things, this equipment allows you to save not only money, but also the space of the apartment. Unlike radiators, the plinth occupies a small amount of space. This is to the liking of the owners of apartments, the area of which is very limited. Warm plinth electric infrared is a natural source of heat, it does not dry the air indoors, and is also completely safe. You can not be afraid of the fact that contiguous surfaces like curtains and furniture can cause a fire. This is due to the perfect security of the system.

Feedback on the harmony in the interior

If you decide to choose a warm plinth electric, you can easily install it with your own hands. Designers and home masters note that this equipment is suitable for any room, because the body can have a completely different color, which allows you to fit this device into any interior. You can choose the material that is made in the imitation of marble, wood or other textures. Consumers quite often choose these skirting boards because they are simply irreplaceable for premises that have high ceilings and an impressive number of window openings. At the same time, no condensation will form on the glass.

Features of the installation

Warm plinth electric, the installation of which you can make independently, is installed on a technology consisting of two stages. The first of them prepares the conclusions for the connection of equipment. Next, the conductive pipes are laid, which go from the collectors. The master must make an electrical cable. At the second stage of installing the skirting, you need to check whether the finishing works have been completed. Next, the body components are assembled, and afterwards the specialist connects the circuits to the terminals. It is important to carry out the necessary insulation measurements. After the completion of these manipulations, it is possible to supply electricity, and also to set up the thermostats.

Recommendations for work

A warm plinth electric, the photo of which is presented in the article, can be installed on any surface, be it masonry, brick foundation, wood or drywall. The surface of the instruments must be protected with a coating that will be resistant to mechanical stress. Use in this case requires powdered polymer technology. Installation of a warm plinth is made around the perimeter of the room, but it is not necessary to do this along the entire length. If you decide to install a warm plinth electric with your hands under the tile, it is important to ensure a safe connection to the outlet.

Site Selection and Installation

Skirting must be mounted in one row, providing a distance of 1 cm from the floor. From the wall, you need to retreat 15 millimeters, using two stops. The gap is needed to create convection and safe operation of the system, this is required to prevent overheating. At the first stage, the wall is marked with a level. You can use a padded thread. The back panel of the module is applied to the wall, which will allow drilling holes to be marked. In these, after these manipulations are inserted plastic dowels, and then the module is fixed in place. All subsequent modules are installed on the same principle, but it is important to strictly adhere to the level.

Methods of work

A warm plinth electric "Megador" supposes the installation of feeding jumpers that is made after installation of all modules. At the same time, make sure to ground. It is allowed to connect 17 modules, but not more. Each module must be connected in series. After the above-described work has been carried out, it is necessary to fix the covers, on which the sutures are installed on the sides. If the cover can not be secured sufficiently, the lower edges are bent. The system provides for the presence of a thermostat, which is located at a distance of 1.2 meters from the floor. It must be installed opposite the heating elements. This part of the system must be protected from drafts, and also located in the most convenient place. This can be an area near sockets and switches. The thermostat should be open for outside air.

The back panel of the regulator is attached to the wall in the place where it is supposed to be installed. It is important to make a marking of holes, which are necessary for drilling. It is important for fasteners to use dowels, whose diameter is 6 millimeters. After the rear part is installed on the wall, you need to check how much it is securely attached to the surface. All these stages are important to implement with special attention, since this will determine the efficiency of the plinth and its durability. If you are not sure of your abilities, then you need to take the help of a specialist.