Vibration isolation for cars: which one to choose?

Over the effectiveness of vibration isolation, many drivers think about during the operation of the machine. In this case, experts recommend paying attention to this characteristic of the car in the course of his choice, not to mention the planned maintenance. Of course, putting isolation at the forefront, leaving behind the other qualities of the model, is not worth it, but if problems with scratches and sounds were initially identified, appropriate measures must be taken. In the fight against negative factors, a special vibration isolation for the car will help. Which is the best one that is offered in the modern market? The answer to this question will be given below.

Vibrodempfer - what to consider when choosing?

Dampers that reduce the vibration effect are the most effective insulation in their class. There are several categories of this material. Using them in a complex, it is possible to provide protection against noise with different frequencies. The base substrate is a dense substrate. It should be borne in mind that such material is distinguished by an impressive mass in comparison with other insulators. But it is thanks to the dense structure that the damping vibration isolation for the car makes it possible to minimize the most unpleasant, low-frequency noise. It is important to pay attention to the outer shell of the coating.

Possessing the ability to reduce vibration and noise, the insulator itself is not designed for mechanical protection. Therefore, the quality of the outer layer is of no small importance. Typically, manufacturers use foil films for this purpose. With this layer, vibration isolation for auto is protected from mechanical and thermal influences. Now it is worth to learn more about varieties of damping insulators.

Vibroplasts

This is a classic vibration isolation, which is characterized by efficiency in operation and low cost. This type of protection is optimal for models of the middle price group. At the base of the coating is a bituminous mass, covered with the mentioned layer of foil. The device is simple, but it provides good vibro-absorbing capabilities. The main criterion in choosing this material is the size. In the range of each manufacturer, this vibration isolation for the car is presented in modifications with different thicknesses. The most common options are 2-2,3 mm. This is the optimal solution for domestic cars and budget foreign cars. Cover vibroplastami can salon, doors with a roof, luggage compartment and even arches of wheels.

Bioplastics

Sometimes it is required not only to prevent the construction of the machine from vibrations and to minimize the noise penetrating into the interior, but also to provide heat-shielding qualities. Such a complex of characteristics is inherent in bioplasts. But their main task is noise absorption, covering the frequency range from 600 to 4000 Hz. If, in the first place, the reduction of the vibrational effect comes out, then such an insulator should be used in combination with the base substrate, which was considered above. The main absorbing vibration isolation for cars in combination with a reliable noise barrier and protection from thermal waves will not only fulfill its basic tasks, but will also last longer. When choosing a bioplast, the thickness parameters are again taken into account, the value of which varies from 5 to 15 mm.

Aerosol insulation

This is a vast group of liquid insulators, which also provide an anti-vibration effect. As the simplest and cheapest method, it is possible to offer aerosol cans in combination with an anti-noise agent. Their contents are sprayed in problem areas, which gives the expected result. A more thorough solution involves the use of a special mastic, which is diluted with water and applied with a brush. It is important to note that such a vibration isolation for cars is used only in those places where it is not possible to apply traditional materials. In particular, wheel arches and the bottom are treated with aerosols. Moving parts and exhaust system are recommended to bypass.

Which manufacturer's preferred products?

There are a lot of brands in the market of automobile insulators, but StP, Kicx and SGM use special attention of professionals. As for StP, under this brand are good base coatings, which allow to reliably protect the machine from unwanted vibrations and at the same time create in the cabin sound comfort. The products are inexpensive and have average qualities. Insulators Kicx can be attributed to the professional. The manufacturer produces several lines with the material intended for the treatment of the floor in the cabin, door panels and a motor shield. Also, the company produces thin dampers, designed for installation in difficult locations. Noteworthy and vibration isolation for the car SGM, which also combines the functions of insulation and noise absorbing material. With the help of this tool, as noted by users, you can significantly improve the acoustic quality of any machine.

How to properly use insulating materials?

The implementation of insulation works of this kind is the pasting of surfaces or spraying of liquid formulations. Initially, you should think over the areas in which the material will be installed, and then proceed with the direct installation. Usually the bundle is supplied with a glue composition - in extreme cases it is possible to use building binders. Correctly installed vibration isolation for the machine during operation is not swollen, does not exfoliate and effectively performs its tasks. By the way, in order to provide a comprehensive protection of the body on the surface of damping cloths, it is recommended to apply anticorrosive compounds.

Conclusion

As practice shows, insulation works in the car give a significant result only in the case of the use of multifunctional materials. That is, among other things, the owner must ensure the reduction of sound vibrations, create a barrier before thermal influences and organize mechanical protection of the installed coating. Only in this case, you can count on comfort in the cabin, which will create a properly mounted vibration isolation for the car. Which insulation should I choose in order not to be disappointed in the operation? The main characteristics of materials and additional functions should be evaluated. In addition, it is important to focus on the capabilities of insulators in terms of the formation of universal protection against various threats. Not necessarily a wide range of protective functions should be provided in one coating. More often, qualitative protection is achieved as a result of the application of several insulating layers.