VGT paint for interior and exterior works. Varieties

Means intended for coloring of various surfaces during repair work are now produced by many manufacturers. One of the most popular brands of LMC is VGT. The VGT paint is produced by the homonymous company of the same name.

Manufacturer

The company VGT was established in 1992. Now it includes two production sites, one of which is located in Yaroslavl, and the second - in the Moscow region. In addition, the company has a research center and its own trucking service. The company's products are delivered to regional markets through an extensive distribution network. Compositions of paints are developed in its own laboratory. When they are created, the climatic features of our country and the specific market conditions are necessarily taken into account.

Main advantages and disadvantages

The advantages of this manufacturer's colors can be attributed in the first place:

• Pure colors;
• Low cost;
• The possibility of independent tinting;
• Ease of use;
• Resistance to external influences of any kind;

The VGT paint is packaged in a container of 1-45 kg. Therefore, the buyer can at any time purchase exactly the amount of money that he needs. Most often, packing is done in light plastic pails. In the future, they can be used for some economic purposes. The colors of this producer stand, depending on the variety, 120-250 rubles. Per kilogram. You can buy them absolutely in any construction hypermarket.

There are practically no shortcomings in the means of this brand. Some owners of houses and apartments note the fact that the VTT paints very sharply and unpleasantly smell (some varieties). Therefore, work with them should only be in the respirator and with the windows open. However, after drying out, this feature of VGT compounds is lost and has absolutely no smell.

Also, to the minuses of the means of the VGT, some owners of houses and apartments do not include a good covering ability. Depending on the type of surface, the LHC coating of VGT can be 100-200 g / m ² . Imported dyes for this feature, the domestic means VGT so far, of course, superior. Where two layers of paintwork materials of foreign manufacture are required for surface painting, the composition of the VGT is often applied at 3-4. However, this does not apply to all VGT facilities. In addition, these compounds are much cheaper than imported ones.

Varieties of VGT paints

The company offers its clients a wide choice of paintwork materials, intended for both exterior and interior works. If you wish, you can buy this brand:

• Water-emulsion, used for painting ceilings and walls;
• Textured, designed to give the surface of a certain texture;
• Crack-resistant;
• enamel;
• Intended for the painting of metal surfaces;
• Facade.

In addition to the actual colors, VGT also produces related materials. Such, for example, as primers and sealants. Also the company is engaged in manufacturing of coloring pastes, putties and decorative plasters.

Where

VGT paint is used to work with a wide variety of surfaces. In addition to plaster and metal, it can be, for example:

• glass;
• tree;
• Minerals;
• plastic.

Using VGT paints from different manufacturers, it is possible to process concrete, brick, and stone.

Water-emulsion for ceilings

This variety is used for painting surfaces mostly only indoors. If desired, you can buy a matte or glossy water-based paint VGT. The manufacturer manufactures the varnishes of this variety, intended both for the treatment of ceilings and walls in ordinary rooms, and in rooms with high humidity. There are also colors of this brand, used specifically for decorating surfaces in children's rooms. Their distinctive feature is an increased degree of environmental safety.

The water-based paint VGT on the surface can be applied using a roller or brush. Sometimes the processing is performed using a spray gun. In most cases, it is allowed to apply the water-based paintwork of this manufacturer and to the old oil or pentaphthalic paint.

Of course, to use the means of VGT, like any other, you need to correctly. The manufacturer recommends using a water-based paint in two layers with a break of one hour. If necessary, this variety is allowed to be used for processing not only plastered surfaces, but also wooden, gypsum plasterboard, concrete and brick.

Enamel VGT

The varnishes of this variety, produced by VGT, are resistant to ultraviolet light and are not afraid of moisture. The company produces enamels of various colors. If desired, you can buy a tool "metallic", "silver", matte super white, etc.

Such VGT paint for interior work is used as often as for exterior ones. There are on sale not only specialized, but also universal enamels of this brand (both for premises and for the street). If desired, you can also buy VGT paint, designed for processing radiators and hot water pipes. Its main advantage is the ability to easily tolerate the effects of elevated temperatures.

Very good reviews are available and about the enamel dyes of this brand, intended for the decoration of floors. To their advantages owners of apartments and houses relate primarily wear resistance, pleasant color and ease of application.

Texture paints

This type of paint is used to produce a decorative relief coating. For the most part, the textured VGT is universal. That is, if desired, it can be painted as small architectural forms, located on the street, and walls or ceilings in the house. To apply such paintwork is allowed on concrete, plastered, brick surfaces.

In addition to high decorative properties, the advantages of textured paints VGT include:

• Resistance to unfavorable weather conditions;
• The ability to "breathe";
• High hardness of the formed film;
• Wear resistance.

To obtain a drawing when painting surfaces using textiles, special tools are used. It can be, for example, a figured rubber roller, a stencil, a special spatula, etc. It is recommended to apply such a paint on the surface in the manner "from angle to corner". Stop during processing, for example, in the middle of the wall can not be. Otherwise, later in this place, the joint will be very noticeable. This paint dries quite a long time - at least for two days.

Crack resistant paints VGT

On sale today there are special specialized coatings of VGT brand. Crack-resistant paint of this manufacturer, for example, is designed for use on old concrete or plastered surfaces with small defects. Such tools are designed specifically to mask the small cracks available on walls or ceilings (up to 1.5 mm). With the use of simple dyes, such defects are subsequently manifested. As a result, the surface looks extremely sloppy. The use of crack-resistant paint VGT the occurrence of such problems completely excludes. The fact is that the film given to it is characterized by increased elasticity. Also, the varnishes of this variety have the following advantages:

• Prevent the formation of new cracks and the expansion of old ones;
• They are characterized by good adhesion, and therefore serve for a long time;
• Characterized by water resistance.

Painted crack-resistant paints VGT surfaces can be washed with household cleaning solutions. These compounds are applied by standard technology. The surface is pre-cleaned and treated with a deep penetration primer.

LMC for metal VGT

VGT, acrylic paint of this type, has in its composition special anti-corrosion inhibitors. Its main advantage is that its use can significantly extend the service life of any steel, iron, aluminum, cast iron, etc. surfaces.

Like most other varieties of the paintwork of this manufacturer, such compounds can be used both in rooms and in the fresh air. If necessary, the VGT paint of this variety can be used for processing not only metal, but also almost any other surfaces. Very often it is used, for example, to color the glass. Also, this means can be treated with wooden, tile or concrete surfaces.

Facade paint VGT: description

VGT paints of this variety can be used not only for finishing the walls of the house from the outside, but also for treating surfaces in rooms with very high humidity. To the advantages of this type of paint and varnish, the owners of summer cottages and suburban residential buildings consider first and foremost the ability not to change color for a long time. White facade means VGT do not turn yellow, and shade - do not fade.

Good customer reviews of the facade paint VGT deserved and for the ease of tinting. If desired, the agent can be given almost any desired color. This variety of colors, unlike some other same manufacturer, is not very expensive. In order to make the surface attractive and neat, it is usually sufficient to apply the acrylic facade in two layers. The only exceptions are those cases when this paint is used for painting new, recently plastered houses. Such surfaces are usually treated in three to four layers.

Tinting paints

These VGT products are most often used, of course, to give a shade to white dyes of the same brand. However, sometimes they are also used as an independent coating. Used such a paint VGT for outdoor work and for indoor. Mineral surfaces can be treated with such means both in the fresh air and in the rooms. Wooden is allowed to be painted only in the premises. Drying tinting LMC VGT within a day.

Add these products to white dyes VGT should be in small portions with constant stirring with a construction mixer. When performing this procedure, it is desirable to obtain a slightly brighter shade than necessary. The fact is that after drying, the color of the punctured ink becomes a bit pale.

Decorative plasters VGT

Such a VGT brand is very popular with the consumer. Decorative plasters of this manufacturer are characterized by aesthetic appearance and excellent performance. They are applied elementary and serve a long time. Especially popular with property owners is the paint "wet silk" VGT (or rather, plaster). It is produced only in white. Only sometimes on sale it is possible to meet a variant "pearls". If necessary, the white agent is simply tinted. To the effect of "wet silk" was clearly visible, the pre-primer used is also recommended to be shaded with VGT pastes.

Other Manufacturer Tools

Therefore, very good deserve plaster and paint VGT consumer reviews. However, other means of this manufacturer are very popular among property owners. For example, many owners of apartments and houses, who decided to make repairs, acquire primers and sealants VGT. The first variety of means can be made on the basis of drying oil or alkyd resin. As a filler, the manufacturer usually uses chalk or crumb of mica. Such mixtures and other additives may be included in the composition. In most cases, in specialized stores you can purchase a VGT primer of deep penetration. The use of this material contributes to significant paint savings.

Of the sealants of this brand, the most popular among owners of real estate deserves a tool designed to handle the interventory seams chopped houses. This compound can also be used to seal cracks in window frames, doors and other wooden structures. Worth this universal tool is not too expensive.