Trees from beads: patterns of weaving. Sakura, money tree, birch, bonsai from beads

Will help to create trees from beads of the scheme of weaving. Birch, sakura and other trees will turn out to be unusually beautiful, picturesque, if you follow them and describe the work.

Belostvolnaya beauty - the beginning of creativity

If you want to make a birch, you will need to make it:

• Copper wire 0.3 thick; 1 mm;
• Beads of dark, light green, turquoise color;
• Aluminum wire thickness 3 mm;
• Stand for wood - bowl, potty;
• Brushes, glue PVA;
• Floristic ribbon;
• Double-sided tape;
• Acrylic or window paint in white.

They will tell you how to make trees from beads, the patterns of weaving. First, pour the beads of all the colors in a suitable container, stir. When stringing you will take it in a chaotic order.

We begin with the consciousness of the first branch. In one hand you have a coil with a wire thickness of 0.3 mm, in the other - the first piece of beads. Strain it on the tip of the wire, pull it a little further, then take the second bead with the hole. So collect 12 beads. Connect the first to the last, twist the wire under them, so that you have a "leg" of it 1 cm high.

Step back as much and make the second leaf, which is hollow inside and consists of 12 beads. These 5 leaflets will be on one side of the branch. Make 3 more leaves, which will become the tip of the branch, then execute 5 more loops. They will be on the other side of the branch.

So they start making trees from beads. The schemes of weaving are so simple that you can do without them. As a result, you have a branch consisting of five leaves on the left and right side, and 3 leaves are apical.

We will compose details in a single whole

In the same technique, create another 49 branches. Now they need to be grouped into five. To do this, leave the end of the wire free, now just twist these parts of the branches so that each consists of five pieces.

Cut a wire of 1 mm thick with a length of 10 cm, attach it to the free part of the branches, fix it with a floral tape. You have got 10 large branches, each of which consists of five small ones.

Cover the floral tape with white paint. When it is dry, make a black brush on top. When it dries, start collecting the birch.

To do this, cut a piece from an aluminum wire that has a cross section of 3 mm. Begin with two-sided tape and floral tape to attach branches to it. Make a thickening to the bottom of the trunk. To do this, first wind the bandage, and then tape and tape for floristry.

How to fix birch and other trees

Put the birch in the bowl, fix it. In the same way, other trees are made from beads, the patterns of weaving are so simple that even beginners can replicate them.

You can fix the trunk with plasticine or first cut out a piece of thick foam plastic of a suitable diameter, put it in a bowl and insert into it the end of the aluminum wire.

To keep the birch or other tree firmly, in a separate bowl, mix 1 part of PVA glue, two - alabaster. Add so much water to make a solution, similar to liquid cottage cheese.

Apply it to a pre-watered tree trunk should not be baggy, since the alabaster very quickly hardens. The remaining solution is placed in the bowl, which is a tree, to fix the birch in this position.

When it is dry, cover it with 2-3 layers of white paint. When each of them dry up, make a few black strokes in the paint to make the birch look like real. Coat the paint and the surface of the alabaster in a bowl, decorate it with colored stones.

Flowering Japanese cherry

Create branches for this tree using your own imagination. It can be as accurate as birch, weaving with beads. Trees (sakura) scheme allows you to make very beautiful. The number of beads on one swallow can be the same as that of a newly created birch. But you will need a bead that is not green, but pink, take some white. Mix these small beads, string them too on 12 pieces to create one leaf.

In the same way as in the first sample, fasten the branches to 5, form the trunk with 2-sided tape and floristic tape. Intentionally do on branches, trunk irregularities, so that the tree looks natural after the beadwork is finished.

Trees (sakura), the design of which is so simple, it is necessary to fix in the container. This will help a mixture of alabaster with water and glue PVA. To make the tree seem to grow, spread the moss around it. It is enough only to moisturize it sometimes, and this natural material will be green for a long time, and sakura will look even more beautiful over it.

Samples of leaves: schemes

Almost the same technology is made and the trees of beads. Weaving schemes for the very first beginners will be presented below.

As you can see in the photo, you first need to thread 5 thin beads on a thin wire. Then bend it, push it into the penultimate, fourth bead, then - into the third, second, first. After that, string on the same wire, pre-bent it at an angle of 45 °, another 5 beads, again thread the end of the wire through four of them.

Collecting in this way 3 fragments, each with five beads, make two more below. Each of them will consist of 7 beads with holes. The sample will facilitate the weaving with beads. The money tree, a scheme for creating branch leaves for which it can be exactly the same, is also very interesting to do.

Symbol of Wealth

Leaflets on it can be such as in the photo. On the central diagram the leaf consists of seven sticks, each of which is strung on 10 beads. You can make a sheet of 22 pieces of wire, as seen in the last diagram.

When the twigs are ready, tie a few coins to them, in which holes are drilled. You can cut out rings from paper of gold color, glue them in pairs and also fix them on the branches with the help of a rope or thin ribbons.

Bonsai

If you want, use an easier way and make not only money, but also other trees from beads. Bonsai weaving patterns are also simple.

Cut slices of a length of 45 cm from wire 0.3-0.4 mm thick. Each of them will soon turn into a branch. Take a little more than 200 grams of beads of green hues, as well as yellow, mix them in a container.

Put so many beads on the first wire so that it covers it by 15 cm. Take a wooden sushi stick, wrap a piece of wire covered with beads on it. Push through the resulting rings one, and in the other side the second end of the wire, tighten.

In the same way, decorate 2 more branches, twist them together, as shown in the photo. Using a floral tape, connect 3-4 branches. Then take 4 such blanks, tape them.

It remains to connect the branches and, observing asymmetry, fix the bonsai in the tank. That's how trees made from beads are made, the patterns of weaving are simple and understandable.