Pattern and poncho pattern: knitting it is not difficult to knit

Knitters are a very specific people. They can be interested in the most complicated design developments and save thousands of pictures with knitted clothes of the most crazy shapes and colors, but with the onset of colds they certainly take up tools and create old good socks or classic hats and scarves.

Similarly, things are the case when you need to make a cape for a child or an adult: leafing through pages with images of Irish lace, "free" and other delicacies, we just knit ponchos with knitting needles. Schemes used in this case are the most usual. True, sometimes they are combined with each other and make up new combinations.

Yarn for poncho

There are many varieties of capes: they can be warm or cotton, dense or openwork, casual or elegant. This article will talk about how to warm up for the winter and tie the ponchos with knitting needles (a scheme, and not one, will be attached to each model).

Based on the purpose of the product, the material should be chosen warm, but light. Otherwise, it can be voluminous, but too heavy. On average, about 800 grams of yarn will be required (provided that its thickness is not more than 300 m / 100 grams) and the poncho scheme.

It is easy to knit with knitting needles, but if it contains braids or bulky "bumps", then the material consumption will increase by 10%. Also, take into account the high collars and brushes (if they will). At the neck height of 18 cm will require at least ½ skein, the same amount will go to the fringe or brush.

The scheme for lazy knitters

The poncho scheme presented by us , knitted needles does not require any special skills. It is enough to know how to perform the facial, purl loops and nakidy. The product consists of one part, made round.

The set of numbers is the neck. Starting from the second row and to the end of the canvas, two places (which must be opposite each other) should be added. To get the right shape, you need to expand the canvas into four loops in each front row.

To do this, from both sides, select one loop and mark them with markers. Then they make the napkin before and after the marked places, and in the purlins, these capes are tied, which leads to the formation of new loops.

That's the whole story about how to quickly link a warm cloak.

Classic Poncho

In the photo, the article shows a product with the simplest cut that you can think of. In fact, this is a rectangle with a neck. Next, we offer you a poncho scheme.

This kind of article does not fit along the knitting needles, but across. That is, the typing edge becomes one side, and the last row becomes the second side.

Therefore, the braids are also located across the poncho. The picture on the details of the transmission and the backrest is the same, but is made in mirror order. Back:

1. On the left side there is a bar (5 loops of garter stitch).
2. Then the area connected by the front surface.
3. Then the fragment, made according to the scheme A.1.
4. Central ornament: a complex braid.
5. Again, the part tied according to the scheme A.1.

As a transition to the detail of the transfer, the strip of the pattern "rice" was used:

1. Face series - 1 facial, 1 purl.
2. Invalid row - 1 front, 1 purl.

The transmission part contains the same set of patterns, but it should be arranged symmetrically.

The knitting pattern of a poncho with knitting needles on the sections at the beginning and at the end of the fabric (5 cm) is only the facial loops. In other words, it is garter stitch, to get the same bar as the sides of the parts.

Forming the neck

In the center of the canvas, an opening must be made, which will serve as a neck. The height of the canvas before its beginning and after completion should be carefully calculated, so that the two sections of the poncho were the same.

The neck is formed in several stages:

1. Immediately cut the loops in a small area (about 8-10 cm).
2. The next 5 cm on both sides of the opening, cut one loop in the front rows. Details of the gear and back are knitted here in turn.
3. Then about 10 cm knit smoothly.
4. The next 5 cm should be added to the loops in the same way as before cut: one in each facial row. Should be a bevel, symmetrical on both sides.
5. At the last stage, the same number of loops is obtained on the spokes, which was cut first (at the first point), the transfer belts and backboards are joined and knitting of one large part continues.

The finished neck must be symmetrical. If this does not happen, the knitter should find the error and fix it.

How to make a collar

After the poncho has been knitted with spokes (the diagram and description can be any), a neck cut must be made. It can be equipped with a neat bar or a high collar.

In any case, along the edge of the neck on the circular spokes, the number of loops calculated in advance is typed in a convenient way. Next, an elastic band is knitted (English, 1: 1 or 2: 2). The height of the bar is usually about 3-5 cm, the part should be made twice as high, then swapped and sewed from the wrong side.

A warm high neck is usually about 18 cm. This size allows you to fold it in half.

Geometric puzzle

The next model is two rectangles stitched in a certain order.

Knit fabrics are extremely simple, because you can use absolutely any pattern or even a simple smooth surface.

Below is the poncho scheme used to make the model in the photo.

Spaces here and a combination of simple braids, a pattern of crossed loops and "bumps" is made. As a result, a very nice version of a smart and warm cloak turned out.

This knitting pattern of poncho knitting needles can be approached as the base of the pattern for any product: sweaters, dresses, scarves or hats. So it can be safely called universal.