The tsar for the moonshine of the device the hands

A self-contained device with a king is required for every person who wishes to receive pure rectified spirit. To date, there is a wide range of different devices, but not all fans of self-brewing can afford to purchase this device and are limited to cheaper products. The best solution is to make the kingpins with your own hands.

Function of the yoke

The mortar for the moonshine is a tube of a certain length, made of stainless steel. The device is filled with prismatic nozzles in the form of a spiral. The main goal of the device is to separate the vapors of moonshine into separate fractions with different density indices.

Manufactured in accordance with all the rules of the king for the moonshine with their own hands allows the device to function no worse than the factory analog.

Determining the length of the yoke

The length of the self-made distillation device must be clearly defined. It is this indicator that provides the multiplicity of product purification at the output. For example, a 15-centimeter device allows you to clean moonshine up to 20 times, and 35-centimeter - up to 50 times. Apparently, the longer the king, the more slowly the division of fractions. This provides a lower content of foreign impurities and a higher strength of the drink.

Even with a standard value of 15-35 cm, you can get a great drink at the outlet. But it requires compulsory purification by means of activated carbon, potassium permanganate or egg white. According to many experts, alcohol treated in this way often turns out to be much better than alcohol, which is cleaned in a 35-centimeter pallet.

However, it should be noted that coal and egg white can not completely absorb impurities that are dangerous to the human body. That is why the use of the king ensures the high quality of the process of making alcohol.

Making a device yourself

The mortar for the moonshine is a structural unit that allows high-quality cleaning of moonshine from fusel oils and foreign impurities.

The main component during distillation is the distillation process. When the heat exchange of fumes that occurs in the king, the quality of cleaning moonshine is much higher. This allows you to get a completely clean product.

Design features of the king

The regiment for the moonshine contains the following elements:

• Threaded joints;
• Retainer clip;
• Stainless steel pipe;
• Heat insulation based on foam rubber;
• Chaotic nozzle with the presence of contact elements;
• Regular nozzle with contact elements.

As a rule, the column for rectification includes several crocks. The self-contained apparatus of double distillation by the carts assumes the complete filling of the latter with contact elements. This provides a process of heat exchange between different fractions: a liquid (condensate run-off) and a steam that rises to the top.

How does the reflux proceed?

How does the moonshine work with the king and the dry-cell (dephlegmator)? The production and purification of alcohol is carried out by the inflow of steam from the distillation cube and the condensate column draining from the head of the column.

If no steam is supplied by the reflux, the heat exchange will become impossible, and rectification (separation of alcohol and steam) will not occur.

To fill the reflux with a steam containing alcohol, it is necessary to install a reflux condenser. After it there is a capacitor representing the hollow part. In it, the liquid is cooled to a certain temperature. In parallel with the device should be located air vents, the function of which involves drawing from the vapor of unaligned alcohol, as well as excess gas.

The main difference between the distillation column and the kingpins is that the reflux in the latter is very slow. During this time, the heat exchange process is carried out.

What materials will be required?

To make a king with your own hands, you will need the following materials:

• A piece of pipe made of stainless steel, brass or copper, the length of which is 15, 35 or 45 cm (the base of the rope). Plain steel, cast iron and plastic for this purpose are not suitable. The steel is susceptible to rapid corrosion, cast iron has too much mass, and the plastic releases toxic substances upon contact.
• Threaded adapter for fixing the limiter. It is attached to the lid of the cube for distillation by means of two clamping nuts on silicone gaskets. Rubber does not apply. Suitable only heat resistant version of the material. If the base of the cube lid is stainless steel, then the nipple can be welded.
• Sieve with small holes to prevent the filling of the filling substance.
• Washcloths of metal based on stainless steel (30-40 pieces).

How is the filler made?

As a material for the filler are scouring from metal. You can also buy small balls of glass or a ceramic embankment. All these materials are inert and do not affect the final product.

The loofah should be cut into two equal parts and carefully separated from the springs. They are twisted into rings of small size to obtain 3-5 turns. Obtained springs must be sifted. The dephlegmator should not get any debris.

Ideal option for the filler is a corrugated fine-meshed mesh in a roll. When laying material in the king, the direction of the stripes alternates from right to left and vice versa.

Assembling the yokes

How is the moonshine with a vertical barrel going?

The process involves the following steps:

• The inner thread is cut on the inner ring. If there is an internal thread on the union, then the outer thread is cut on the shank. The length of the thread should be at least 3 cm. It will hold the entire top base of the machine. If the king acts as the base of the column for rectification, then there will be no lateral load. But if a lateral pipeline with a refrigerator is supposed to be connected, it is advisable to make a solid base. The upper part of the yoke must also be provided with a thread. It connects the steam outlet to the refrigerator. The length of the lower part of the king may be 35-40 cm. If necessary, it can be lengthened. If there is a thread, you can use a clutch, an American, etc.
• Take a 35-centimeter tube and two adapters, located on the bottom and top. The distiller is screwed to the upper adapter.
• From the bottom of the pipe measured 35 cm and drilled hole diameter of 6 mm. This will be a thermometer sleeve. Here, insert a probe for the thermometer, which makes it possible to control the temperature. The thermometer sleeve is covered by an elastic band from the dropper. This ensures a sealed connection.
• The pipe can be filled with prepared springs from the bast, with balls of glass or clay embankment. The filler is densely packed, but not pushed. There will be enough tapping of the pipe on the table.
• The screen is screwed onto the bottom, which is fixed by means of an adapter.

Conclusion

The manufacture of such a device, as a rope for the moonshine, is not a complicated process. A person with the skills of using a Bulgarian and a drill is able to make the simplest version of such a device. Undoubtedly, a better product will be obtained if the master has the skill of working on a lathe and welding technique. The more so that threading on stainless steel by hand is a complex and time-consuming process.