How to make a tubing in the bathroom?

A modern bathroom can not be imagined without communications. But the sewage and water pipes will not give the room an attraction. Therefore, in the process of repair, the owners of apartments and houses hide these systems under the boxes. Such designs can be fully implemented independently, without the involvement of professionals. Only for the beginning it is necessary to choose a material. To implement the described task, you can use one of several methods and perform the installation:

• Boxes;
• Furniture;
• Rollets;
• Pipes in the wall.

When choosing a variant, it is worth considering the possibility of maintenance of pipes. In the event of a breakdown, the decor of the room must not be damaged. Once the box can be installed, it is possible to mount a collapsible structure or make access doors.

The tubing box in the bathroom can be installed depending on the location of the mains. You can close only the pipes or the entire wall completely. The first option involves the decoration of individual sections, so there is an opportunity to save on materials.

If you sew the entire plane, the room will look more attractive, but this design will reduce the useful area. The space partially occupied by the pipes, you can use, storing there different things.

Preparation of tools and materials

Like all the other rooms in your home, a bathroom should look attractive. The tube box in the room can be made from different materials - it can be plasterboard, plastic or wood. However, before starting work, you should take care of the availability of some tools, among them:

• roulette;
• hammer drill;
• Construction knife;
• Plumb bob;
• A building corner;
• a hammer;
• Bubble level.

For the execution of the boxes, a standard sheet of plasterboard with dimensions of 2500x1200 mm will suffice. The thickness can make a limit from 9 to 12,5 mm. It is better to purchase a moisture-resistant material, because the sewer pipe and water pipes are covered with perspiration, so the humidity will be significant.

The frame can be made of wooden bars square section with a side of 40 or 50 mm. As an alternative solution is a galvanized profile, designed to work with plasterboard. The latter option is more practical, because the profile does not require special training, and it is much easier to install it.

Material selection

Before you make a tubing in the bathroom, you should pick up the material. It should be moisture resistant, have a small thickness and weight, and also have ecologically safe ingredients that do not emit harmful substances into the atmosphere. According to these requirements, you can choose plywood, plastic, MDF or moisture resistant drywall.

Training

Before installing the tubing in the bathroom, you need to think about where the problems most often will occur. Problems with the water supply system or sewerage occur at the connection points. If you plan to install the box after laying the pipes, care should be taken to ensure that the pipeline has fewer connections.

If a replacement of the pipeline is not planned, then before inspecting the pipes, it is necessary to inspect them. Without fear of leaks, you can close welded or sealed connections. With regard to fittings, they should be provided with free access. They should be inspected periodically. This indicates that the threaded connections can not be immobilized. Access should also be guaranteed to sewer audits, valves, filters and meters.

Making a box: determining the dimensions

The pipe box in the bathroom must be completed only after it is possible to determine its future dimensions. The distance from the walls of the duct to the pipes should not be less than 3 cm. Once the markings on the floor have been realized, the contours of the future duct can be transferred to the ceiling and walls using a plumb line.

Frame installation

Before the filling of the communication system, the frame must be installed. It is better to perform it from a galvanized profile, because the air in the room will be constantly wet, so the wood is not suitable. If the latter option is still preferable for you, then you should pick up bars made from rocks resistant to decay. Before use, the elements are treated with an antiseptic.

The components of the frame are fastened together by self-tapping screws or cutters. To fix the profile to the wall, you can stock eurosurfaces or dowels. The box that closes the tubing of the bathroom must first be attached to the walls. At the next stage, the racks are assembled, which will form the front face. Next, guides are installed on the floor and ceiling.

If the length of the racks is more than 1.5 m, you should make jumpers between them. They are required for a frame with a width of more than 0.25 m. The distance between the jumpers should not be more than a meter. How to make a tubing in the bathroom so that it will serve for many years? You must process the place of sawing with mastic if you use wooden elements. This will not only protect the material from damage, but also eliminate its deformation.

Skeleton casing

Preparing the details for the box, it is necessary to form the whole elements. First, cut the side walls. They are cut out so that the edges do not go beyond the profile of the frame. Then the front part of the box is cut out, which should close the sidewalls. After cutting, the material is mounted to the posts. To do this, use a 3.5-cm self-tapping screw. The step between them should be 2.5 cm. This will ensure the frame strength, so there is no need to fix the material to the jumpers.

For the manufacture of doors it is possible to apply the elements that will be fixed to the magnets. Sometimes the box under the pipes in the bathroom is made completely collapsible. For this, the sheets of material are fixed with screws at the very edge. The final decoration does not involve decorating them, this is necessary if the ceramic tile is used at the final stage. To make the box complete, you can use a plinth or plastic corners. If it is necessary to dismantle the box, the skirting board is removed, the screws are unscrewed, the finishing material is removed.

Additional recommendations for plasterboard plating

A tube box in a plasterboard bathroom is the most common solution for decorating communications. For plating the frame it is necessary to prepare gypsum board, the thickness of which is 9.5 mm. Places of joints should be puttied, and then the surface is painted or lined with other material, if desired.

Making a plastic box

The first thing to do before you make a box in the bathroom is to close the pipes with a frame. This was discussed above. However, if you want to use polystyrene panels as the liner for the box, the skin will be made slightly differently. The advantage of this solution is the ability to adjust the structure in height.

The panels have legs, which makes it possible to level the unevenness of the floor. With the help of these legs you can close the irregularities, reaching 10 cm. Mounting the panels will look like this. The end support is mounted on the wall. Top and side edges should be glued with glue and set in place. A wrench will allow you to twist the legs of the panels. Plastic tubing for tubing in the bathroom is not only easy to install, but also is strong, as well as reliable.

Recommendations of the specialist for the plating of the frame of the box with PVC panels

After installing the start profile, to avoid deformation, it is necessary to fix it with flecks on the guide profile. On the plastic panel you need to measure the right size, after cutting it with a sharp knife. In the starting profile, the first panel is fixed, while the other is attached to the corner profile.

For the connection it is necessary to use bugs or fleas. The second side of the box is assembled according to the same principle. On the last panel you need to fix the start profile. Using silicone, you will ensure the ease of dismantling when there are emergency situations. In those places where it is necessary to provide unimpeded access to the elements of the pipeline, it is necessary to cut through the inspection holes. Special hatches are installed using silicone sealant.

Conclusion

Before the manufacture of the box, you need to think about what material the frame will be made of. If you plan to apply a profile, you should purchase the UD and CD guides. If you prefer wood, then to join the elements from it it is better to purchase the hardened screws, the length of which will be twice the size of the used timber.

In each of these cases, to secure the gypsum boards, it is better to stock up with self-tapping screws, the dimensions of which are 35-45 mm. It is important to choose the fasteners, which has a piercing tip. It will be easier to work with, and it will not damage the material.