The embodiment of a child's dream: a tree house

In summer, children are free from school, they have a lot of time, which they prefer to spend on fun games with friends. If you spend the whole season with your family at the dacha, then you need to organize a space for rest and entertainment of the child. For example, you can install a swing or build a small hill. Another great option - a house on the tree. In the shops are already ready-made options that are delivered to the place (at the dacha) in disassembled form, and there is already installed the construction. It turns out very beautiful, as in a fairy tale. And pleasure is not cheap. But who said that you can not personally build a house on a tree for children? There is nothing complicated. All that is required of you is patience and the strict implementation of the points described below.

The house on the tree is made of the following materials:

• 8 spruce beams (length 3000 mm, section 100x100 mm);
• 60 boards (length 2500 mm, section 20x100 mm);
• 50 boards (length 2000 mm, section 20х100 mm);
• 2 slats (length 2000 mm);
• 5 racks (length 700 mm).

How to build a tree house:

1) First we need to cut the length, and also saw the upper ends of the rafters strictly at an angle of 30 degrees. Next, put them in pairs on a perfectly flat surface, connecting the sawn ends with screws. Be sure to ensure that the distance between the lower ends of the rafters does not exceed 3000 mm.

2) Joint rafters must be fastened with bolts. For this purpose, screws with a countersunk head are best suited. Now you can lay out the first rafter structure on the site. The bars of other shapes will be laid on it.

3) Without an assistant in this case can not do. After all, self-reconciliation of all forms will be quite difficult. Under the rafters, do not forget to install special supports. They usually use long boards and equidistant bricks. Adjustment of supports is made horizontally. Please note that the distance between 2 and 3, as well as 3 and 4 rafters should be 800 mm. And between 1 and 2 in the account, the trusses have to make a gap of 500 mm. This is the only way to ensure the reliability of the rung of the ladder.

4) Our house on the tree is not ready yet. Even if the design is successfully installed, it is still necessary to perform internal work. We take up the flooring. Pre-prepared boards are fixed to bolts with screws. After you figure out the floors, you can move to the arrangement of the back of the house. We nail boards, placing them horizontally. Inside the house a partition is made. It can be in front of the second under the account of a truss farm. The boards are vertically attached to the roof rails with screws. And the rails themselves are attached to the rafters and half screws.

5) The final point - the arrangement of the roof. Without this element it is impossible to imagine any house. Be sure to leave open that section of the roof that is located in the stair area. To cover a small house on a tree is best done by the "Christmas tree" method, that is, with the allowance. Materials for the roof can be very different, from the branches of trees and ending with soft tiles. Everything will depend on your imagination and budget.

It's simple.