Than it is good to pour the floor with a self-leveling mixture

To date, there is a huge amount of a variety of materials that can be used as floor coverings. But in order for the styling to pass as it should, it is necessary to prepare the foundation in advance, making it perfectly even. In this article we will talk about what it means to fill the floor with a self-leveling mixture.

Of course, you can do everything the old fashioned way. To do this, you only need to set up beacons and fill the surface with ordinary cement. But this process is more difficult and time-consuming. That is why many prefer to resort to special mixtures that have a lot of advantages.

Pouring the floor with a self-leveling mixture has become possible relatively recently. The use of modern materials provides a variety of possibilities with which to prepare the floor for laying flooring has become much easier. And the quality of such mixtures fully meets all the requirements that are necessary for the subsequent finishing of the floor.

Before the floor is poured with a self-leveling mixture, you need to know more about its composition. It is understood that the materials used to create the mixture will depend on the conditions of its operation. Therefore, the purchase should be approached with special attention.

In its composition, the mixtures may contain gypsum, cement or polymers. If a greater thickness of the layer is required, the floor should be poured into the apartment with the help of that mortar that was made on a cement base. To improve the quality, another layer should be applied. It will consist of a mixture that has polymers in its composition.

Before you begin to level the base, you will need to apply a special layer of primer. It is necessary in order to improve the property of adhesion with subsequent self-leveling layers. Primer in its composition has not only astringent materials, which contribute to better adhesion of subsequent layers to the substrate. Also, in the production of primers, various antiseptics are used that prevent the emergence of fungi and bacteria.

Everyone can get a more economical option. It is used if the surface is dry and has no cracks. In this case, the mixture itself can be used as a primer for leveling. Preliminary it will have to be diluted with water in a much larger volume than when preparing the working solution.

The floor must be filled with a self-leveling mixture only with a carefully prepared base. It should not have debris, oil substances, coloring agents, etc. If all this is on the surface, then it is necessary to get rid of it. In addition, the substrate must be dry. Before pouring it is required to apply a primer coat. This can be done with a roller or brush. Ideally, there should be two such layers. Between their application it is necessary to make a short pause to allow time for the first layer to grasp the base. After applying the second layer, you also need to take a break at four o'clock. But you do not need to pull with the fill, because you will not be able to get the desired effect in a day.

When preparing the mortar, follow the instructions that come with the package. It should be understood that the container in which the solution will be prepared should be dry and clean. To avoid lumps, the dry mixture must be gradually added to the water and mixed with a drill with a special nozzle. Mixing time should be selected according to the instructions.

The fill layer should not be thinner than five millimeters. After it is completed, it is necessary to roll the layer with a roller to get rid of air bubbles. As you can see, self-leveling floors with their own hands are not so difficult as it might seem at first glance.