Sump submersible pump: marks, characteristics, reviews

How to choose a well pump? Many experts recommend trusting only proven brands. The performance parameter for low-power models does not exceed 230 cu. Meters of water per hour. The pushers in the devices are of different lengths.

An adapter is used to connect the pump. The locating pins can be with or without clamps. Rods are integral parts of pumps. They are located in a horizontal or vertical position. A quality submersible pump costs around 12 thousand rubles.

Characteristics of PEDROLLO 4BLOCKm2 / 20 pump

This well pump (submersible) is suitable for wells of different depths. Directly the piston in the device is on the lining. If you trust the words of experts, then the move is quite large. The weight of this model is 12 kg. The clutch in this case is designed for a pressure of 8 N. The pushers in the device are located behind the valves. The feeder is provided with an expander. The return spring is not very large.

The plunger device is located behind the holder. The model is connected via an adapter. The stand for this pump is made entirely of stainless steel. The submitted submersible pump operates at a frequency of 60 Hz. If you trust the reviews of experts, then the valve is easy to lubricate. The pressure in the plunger mechanism is maintained at 3 bar. The pumping protection system is used in the second class. It is worth this well pump (submersible) in the area of 13 thousand rubles.

Comments about the model PEDROLLO 4BLOCKm2 / 22

The said pump (submersible well) reviews, as a rule, receive a positive character. Many specialists praise him for his prompt inclusion. The plunger mechanism is located behind the holders. If you trust the reviews of experts, the swap is carried out quite quickly. The overload indicator is at 14 N. There are various keys for servicing devices. The bar at the presented pump is behind the piston.

The camera in this case has a length of 35 cm. The pusher is located behind the counter. The performance indicator is exactly 130 cubic meters. Meters of water per hour. For wells at 10 meters the model fits perfectly. The swap device is used with the holder. The protective ring at the pump is installed behind the bar. It is made entirely of cast iron. According to experts, the frequency of the pump is maintained well. Problems with pumping water are not often observed. The piston diameter of the modification is 3.3 cm.

The return spring of the mechanism is used without clamping. Filters at the pump of the specified series are absent. It is also important to note that the model uses only one bar. In order to monitor the parameters of the device, it is allowed to connect a pressure gauge. The clutch in the device has a maximum pressure of 3.4 bar. In stores, the submitted well pump (submersible) is sold at a price of 9 thousand rubles.

Parameters of the modification "Gileks"

Pump well sink "Dzhielek" reviews is very diverse. Customers praise it for its practicality and compact dimensions. The stand in this case is used in stainless steel. The pushers are made entirely of cast iron. It is also important to note that the model has only one piston installed. In diameter, it is exactly 3.5 cm. For wells at 5 meters, the model fits perfectly. The performance of the modification is at the level of 210 cu. Meters of water per hour. A standard set of keys is required to service the device.

The feeder of the model is made with one holder. Clips at the counter are capable of withstanding heavy loads. The pump of this series operates at a frequency of 65 Hz. The camera has a single-channel type. The width of the holder is 2.3 cm. The handle for pumping is not available for modification. If necessary, the manometer can be connected via a connector. The filter for the pump in this series is also absent. There is a model on the shelves no more than 10,200 rubles.

Reviews about the model Divertron 1000

The submersible pump Divertron 1000 is designed for deep wells. The seal in the device is used with overlays. The water feed mechanism is made with one chamber. The clutch of the model perfectly copes with overloads. There are no filters for this pump. The performance of the modification is no more than 230 cubic meters of water per hour.

For wells at 20 meters, the pump in this series fits perfectly. The manometer is allowed to be connected via a contact adapter. To maintain the modification it is important to understand the plunger device. The coupling in this case does not need frequent lubrication. Judging by the experts' opinions, the bar is rarely erased. To find the pump of the specified series it is possible in shops at the price of no more than 11 thousand rbl.

Characteristics of the Wilo TWU 3-0115 pump

This submersible well pump with automation is suitable for wells of different depths. The piston in this case is used with the holder. Feedback from users and experts say that it rarely breaks. The pumping mechanism is installed in a single-chamber type. Channels in the device are clogged up rarely. The model of this series does not have a choke. The pins are located near the coupling. The length of the plunger is 21 cm. The valves of the model are inside the channel.

The connecting hose is used in braiding. The model is perfectly suited for wells at 10 meters. The maximum pressure at the pump is 4 bar. Overloading feeder can withstand quite large. The pressure gauge can be connected via an adapter. Experts and model owners confirm in their responses that the rack is protected well. The plunger device is located behind the piston. Directly the expander wears out very slowly.

It is especially important to note that there is no sealing bushing in the device. The model weighs a lot, and with transportation problems can arise. The pushers at this pump are connected to the bracket. The bar of the model is made entirely of stainless steel. In maintenance, the device is quite simple. Buy a model of this series in a specialized store can be priced from 8700 rubles.

Wilo TWU Modification Options 3-0123

This well pump is very popular. What are his parameters? Experts say that the stand is made with a quality clamp. The piston of the modification is used at 2.2 cm. The pushers in the device are mounted over the holder. The return spring of the modification is able to withstand a pressure of 3 N. Judging by the discontented feedback from customers, for wells at 15 meters the model is not suitable. But for wells at 10 meters it will fit perfectly.

The system of protection against pumping is applied in the third class. Filters for the modification are only used with an overlay. The coupling at the mechanism is installed in the upper part of the structure. The sealing bush protects the piston reliably. Speaking about the characteristics of the device, it is important to note that the power of the equipment is 4 kW. Due to this, the performance of the model is high. The bar in the device is made entirely of cast iron. The weight of said submersible pump is 12 kg. It is worth modifying the market for about 8300 rubles.

Characteristics of the Wilo TWU 3-0124 pump

These submersible well pumps for water supply are distinguished by a large rack. As evidenced by customer feedback, the piston is of high quality. The coupling at the modification is applied with a handle. The bar in this case is made of cast iron. There is a sealing bushing on the piston. In service, the pump in this series is quite simple. For wells at 15 meters the model suits well.

The pressure gauge to the device is allowed to be connected via an adapter. It is located next to the pushers. The connector at the modification is made entirely of stainless steel. The charging valve is designed for a load of 3 bar. The pins of the modification are located near the adapter. It is worth a pump of this series within 10,200 rubles.

Comments about the model Wilo TWU 3-0136

This well pump submerged has rather high characteristics. The power of the unit is at 5 kW. The device operates at a frequency of 55 Hz. Experts say that the modification is connected quite simply. The coupling in the pump is located near the camera. The piston of the device is designed for a pressure of 2 bar.

The adapter for a manometer in this case is of the contact type. The fitting is fitted with a protective washer. The performance of the modification is not more than 250 cubic meters of water per hour. The locating pins wear out very quickly. However, you can replace them without problems. Directly the pump stand of this series has a length of 25 cm. According to many buyers, the camera is rarely contaminated. Protection against pumping is applied in the second class. The limiting pressure on the plunger device is 2 bars.

The filter under the modification is under the camera. The holders in the device are made of cast iron. Stops are not very big. For wells at 20 meters, the modification is not bad. The hose in this case is connected to the branch pipe. The charging valve is located in the chamber. The lining of the pump is made of polymer. Buy a model of this series in our time can be priced from 12,300 rubles.

Parameters of well modification Wilo TWU 3-0138

This submersible well pump (water cannon) is made with two chambers. The piston at it is applied in diameter in 3.4 see If to trust experts' reviews, then it wears out slowly. It is also important to note that the pump has a compact rack. Directly the holders are made entirely of cast iron. The retainer does not have a modification. The connecting hose is 12 cm in diameter. The locating pins have good strength.

The nominal power rating of the pump is 5 kW. Overload in the 3 H model can not stand. In the maintenance of the device is difficult to call simple. First and foremost, it is important to note that the pushers are difficult to remove. Lubrication on the plunger mechanism is poor. Sealing sleeve sometimes crack and wear out quickly. The return spring at the pump is not of good quality. The model of this series is about 10300 rubles.

Characteristics of the Grundfos submersible pump

The well submersible Grundfos pump is suitable for wells of 10 meters or more. If you trust the reviews of experts, the racks are designed for heavy loads. Directly the piston of the modification is set to 3.3 cm. The feed mechanism is located at the bottom of the structure. Filters in this case are of high quality. The camera model is not very wide.

The clutch of the presented pump can withstand a pressure of 4 bar. According to experts, problems with pushers are rare. The pressure gauge to the modification is connected via a connector. The hose of the model is fixed to a diameter of 0.5 cm. The return spring is used with the holder. The plunger device is attached to the clamp. The overload limit for the pump is 2 N. There is no sealing bush above the counter in this case. This submersible pump costs about 12,300 rubles.

Reviews of the well submersible model Water Horse

This submersible pump has one piston. The stand is made of stainless steel. In total, the model has three cast iron pushers. If you trust the reviews of experts, the sealing bushing is capable of withstanding heavy loads. The width of the adapter is 3.5 cm. The handle in this case is not provided by the manufacturer. An adapter is located in front of the adapter.

There is no pressure gauge in the standard set of the pump. The bar width is 3.4 cm. Two filters are installed to clean the channel. If you trust the reviews of experts, they are hammered very rarely. The coupling deserves special attention. In this case, it is made with two locks. There is a model in the area of 11300 rubles.

Reviews of the model SPERONI SP 50-10

This submersible pump has one piston. The stand is made of stainless steel. In total, the model has three cast iron pushers. Sealing sleeve is capable of withstanding heavy loads. The width of the adapter is 3.5 cm. The handle in this case is not provided by the manufacturer. An adapter is located in front of the adapter.

There is no pressure gauge in the standard set of the pump. The bar width is 3.4 cm. Two filters are installed to clean the channel. Users note that they are hammered very rarely. The coupling deserves special attention. In this case, it is made with two locks. There is a model in the area of 11300 rubles.

Parameters of well modification SPERONI SP 50-12

The downhole pump of this series is produced with a long union. Judging by the numerous reviews, the mechanism is set up quite simply. The stand has a diameter of 6.7 cm. The pushers are located in the lower part of the chamber. The pumping valve in the device is capable of withstanding heavy loads. The pressure gauge can be connected directly through the connector.

It is also important to note that the modification has a quality piston. The indicator of the stroke is quite large. The impeller deserves special attention in the mechanism. The O-ring on it does not need frequent lubrication. The height of the pusher is 4.4 cm. The adapters of the model are wired. This submersible pump operates at a frequency of 65 Hz. Find the presented goods on the shelves can be priced from 12 thousand rubles.

Characteristics of the submersible pump SPERONI SP 50-14

This submersible well pump is in demand. The plunger is of a small size. As the buyers of this model note, the stroke of the piston reaches a maximum of 22 cm. The adapter for connection at the pump is installed in the lower part of the structure. The bar is used in this case with a protective washer. The fitting is located directly on the gasket. The limit power rating of a submersible pump is at a level of 5 kW.

The modification works at a frequency of 60 Hz. The system of protection against pumping is applied in the third class. A long stand deserves special attention. The camera is available with one channel. The pushers in the device are arranged in pairs. The gauge is connected to the connector as standard. There is a modification for the wells in the area of 13400 rubles.

Reviews of the well model "Kid"

The water pump "Kid" from other models has a high stand. Adapter in this case is behind the pushers. It is also important to note that the modification uses a quality plunger. His head is made quite wide and the pressure holds back well. Directly the piston is under the camera, and problems with it are rare. The return spring of the model in this series is capable of withstanding an overload of 3 N. It is also important to note that this submersible pump has a clamping flange.

The washer is not very large in diameter. Filters near the valves are used with a wire mesh. The pressure gauge to the above submersible pump is connected without problems. The coupling in this case is fixed to the rack. The power limit for this submersible pump is 7 kW. The mechanism of this series operates at a frequency of 50 Hz. You can buy a water pump "Kid" in stores at a price of 12 thousand rubles.

Pump results

Taking into account the characteristics of the above models, the rating of well submersible pumps is as follows:

1. Grundfos.

2. SPERONI SP 50-14.

3. Wilo TWU 3-0124.

4. PEDROLLO 4BLOCKm2 / 22.

5. SPERONI SP 50-10.

Each model has its advantages. The choice depends on the expected depth of the well and the desired power of the device.