Self-made cooking: step-by-step instruction

Many car owners have resorted to various ways of tuning their steel horses to improve their appearance and technical characteristics. To one of such methods it is possible to carry manufacturing of puffers. It is quite possible to carry out this process with your own hands. It is enough to have a set of stamped wheel disks, a necessary set of tools and experience with handling the welding machine. Below is a step-by-step instruction for performing the work and the necessary tips for changing discs by the method of welding.

Razvarka - what is it?

This is the usual name of stamped discs, which are expanded by certain actions. The car with these wheels looks quite original, also changes its track. Simply put, to make the brewing - this is to increase the width of the rim.

The original name of the disks was obtained because of the method of conversion, which is based on welding.

The given tuning works are applied both on import, and on domestic cars. Welding, with their own hands on VAZ made, are in great demand, since this is a cheaper way than buying new drives with a wide profile.

Options

In general, the size of the width of the profile of the altered rim depends on the preferences of the owner of the car and the structural features of the body of the car itself. Installing too wide rims will require additional work with the body, such as mounting special linings on wheel arches, installing a body kit and changing the arched part of the wing. Considering the advice of folk experts, a rim measuring 13 inches can be expanded to a maximum of seven inches.

All work on the conversion of disks must be done with special care and attention, since otherwise there is a high probability of simply corrupting the disk.

Required tools and accessories

Razvarka, made by own hands, implies the use of various tools and devices. So, to carry out the process, you need a measuring tape and calipers, a Bulgarian (cutting and grinding disks), a welding machine, a drill and two stamped rims. In addition, it is necessary to have a sheet of metal of the same thickness as the stamping.

Features

It is advisable to take a new disc for brewing, since it does not have deformations. But if the rim is subject to rim, which was in use, it must be pre-rolled and get rid of dents. In the future, this will not cause problems in the manufacture of an expanded product.

How to make self-cooking

The entire manufacturing process consists of several step-by-step operations, the quality of which affects the final result. If you have all the necessary tools and materials, you can start work:

• The first method is that two discs will be needed to make one brew. One will be the basis of the product, the second will serve as a spare material. The rim is cut off from the main with the help of a Bulgarian. The same operation is carried out on the second. Then part of the first wheel is mounted on the car, and the rim from the second is mounted on the disk. At the same time, all sizes are observed and alignment is carried out. Then, the surfaces of the disc and rim are joined by welding from both sides of the joints. In the future, the welding seam is sanded with a grinder, the wheel is painted.
• Razvarka, made by the second hand, is more economical, because for this only one disk will be needed. It is cut in half along the radius. Then a strip of metal is prepared, pre-measured in width and length. The wider the strip, the wider the product will be. Its length should correspond to the radius of the disk in the plane of the cut. The metal tire is welded to the wheel. Gradually bending it according to the radius, make a spot weld. After the preliminary installation and fitting, the main welding seam is placed at the junction point. Further to the opposite part of the tire is welded part of the disk, which was cut earlier. The final stage of production is the cleaning of welding seams and painting, balancing.

It must be remembered that all joints of the wheel elements must first be stripped with a Bulgarian or a file of hangings, and also chamfered for a better seam.

The painting process

The application of paint on discs is the final stage of production. Powder composition for this is best. Directly before painting discs are cleaned from old paint, corrosion marks and degreased. Further they are treated with a primer. They let it dry. After this you can proceed directly to painting. It is recommended to apply it in several layers, with an exposure for drying the previous ones. In conclusion, apply a coat of varnish. With this method of dyeing, the paintwork will last a long time.

Conclusion

At first glance, the development of discs with their own hands seems a simple way to change the appearance of the car. But on the other hand, there is a change in the technical characteristics of the wheel, which affects the performance of the running gear and control.

As for the benefits of this modernization, here the opinions of motorists are different - some are against, and the second is for. Opponents of such tuning as a car breakdown, made with their own hands on the car, note that the wheel becomes less reliable, the car loses its maneuverability, and also the load on the chassis increases. At the same time, their opponents claim that these products are used on race cars and in their essence can not be less reliable.

Anyway, you can only make your own conclusions about whether a cookie made by your own hands is suitable for your car or not. And you can be sure of this only by installing these elements on your machine.