How to build a fence from the proflist by yourself: the main points

Any owner of a land plot wants to protect his property as reliably as possible, and at the same time the yard is improved. A large range of fences and fences significantly complicates the choice. There is material that can decorate the plot and at the same time reliably protect it - corrugated board. The fence from it has a lot of advantages. You can make it for individual design, quickly and easily mount it by your own efforts. A variety of colors allows you to choose the right option for your garden. In the event of a stop on this material, the question may arise before you: how to build a fence from the profilist with your own hands?

It is worth saying that you can do this without much effort. It is important to correctly calculate the amount of material, and then carefully study the instructions for mounting the profiled sheet. Talking about how to build a fence from the profilist with your own hands, you should tell about the sequence of work. To begin with, measure the perimeter of the site, after which it is necessary to determine the type of the point of installation of supports, between which it is important to observe a distance of not more than three meters. Before you build a fence from the profilist with your own hands, you also have to decide where the gate and gate will be. Another weighty factor is the height of the fence.

At the first stage, the installation of support pillars should be done. First, the part of the pipe facing upwards should be welded to reduce the negative effects on it - rain, snow, dirt. With the help of a hand drill, it is necessary to make pits with a depth of one and a half meters. The bottom is covered with rubble, which has a middle fraction, its layer should be about one-fifth of a meter. Then you can install the pillars, and then pour concrete.

Posts should be leveled or leveled, and then fixed through temporary supports. If you make a fence from the profile with your own hands, you should know that the foundation will catch in three days, so you should stop any work that could harm it. When the foundation becomes stronger, it is possible to install transverse lags in the form of steel profiles. They are used as a fastening for the profiled sheet. For this purpose it is most appropriate to use a profile pipe. For a fence with a height of up to one and a half meters, two lags will suffice, for a higher one there are three. On the diagonal, it is possible to start logs, which allow to strengthen the structure. If you talk in detail about how to build a fence from the profilist with your own hands, it should be noted that the logs are fixed by welding. Pillars and logs must be treated with a primer.

Now it's time to make a fence from the proflist. The material is fixed by means of self-tapping screws for metal, while a step of 50 centimeters is observed. Laminated sheets must be overlapped. When the work is completed, it is necessary to remove the remnants of materials and tools. Such a fence will for many years protect your home garden from dust and noise from the street.