Screed floor with expanded clay: technology of arrangement

In any construction, it is necessary to take care of the insulation of your housing. For this, different materials are used. For example, a floor screed with expanded clay will provide comfort in your home. However, the organization of such isolation will not affect your budget. The fact that clay is one of the cheapest insulation for today.

The procedure itself is quick and easy. Special tools for the work will not be needed. However, the floor screed with expanded clay must have a certain thickness. The smallest size is 3 cm. Often this way you can not only insulate, but even the level of the surface in all rooms. Another advantage is lightness, so it can be stacked even in apartments.

The floor screed with expanded clay must be made with a level so that the finished surface is perfectly flat. Additionally on the walls you can make the layout of the layer height. If there are any defects in the floor, they must be repaired. To do this, you can use a liquid solution that will be used to form the screed. Next, you need to set beacons and determine the highest point of the bottom of the floor. For proper installation, wood pads of different thickness are used.

Further, the floor screed with expanded clay is made very simply: it is necessary to pour a heater on the surface by beacons. Distribute it so that there is room for pouring. Now you need to prepare the cement milk and pour it with expanded clay. It must fasten the stones, so you can walk on the layer without fear of breaking it. In addition, the milk will prevent the rapid absorption of cement mortar into the stones. The fact is that in this case, it will begin to lose moisture faster than it should, and then it will start to crack.

The filling of the floor with expanded clay with cement milk is carried out very carefully so that a film forms on the surface of the stones. If it's not there, you've added too much water to the solution. Now you can go directly to the pouring of the floor. For this, it is necessary to use very high-quality cement. Stir the solution followed by a mixer. In this case, excess air will leave the mixture. Now the stores are already selling the finished material, which you only need to mix with water.

The pouring of the floor with expanded clay is carried out with parallel equalization of the solution. The mass for the beginning is stacked on the lighthouses, and then distributed around the perimeter.

There is another way to organize such a screed. Preparation for pouring is the same as in the previous case, but the mixture is done a little differently. For this, one large container should be filled with pebbles and mortar. Mix all the ingredients very carefully. However, the complexity of the process lies in the fact that you must accurately select all the proportions of cement, water, sand and expanded clay. Therefore, it is better to use the already prepared mixture.

So, you can be sure that there is nothing complicated in the arrangement of the claydite screed, and you can manage it yourself. Good luck!