Scooter with electric motor: a review of manufacturers. Electric motor for scooter with their own hands. Two-wheel autosamot on own wheels

To date, electric cars are quite in demand. There are many models for children on the market. However, for adults, manufacturers are also willing to offer devices. By design, they are quite different. Also it should be taken into account that it is absolutely possible to assemble the electric self-winding machine. However, in order to understand this issue more, it is necessary to study the main device manufacturers, as well as to learn the parameters of the most interesting models.

Electrosamokats of firm "Energy"

The handlebars in this company's electrical seams are mainly used straight. The engines are most often installed with a power limit of 5 kW. All this allows the maximum speed to dial up to 10 km per hour. Separately, it should also be noted that the starters are of a manual type. Directly mounted frames are different. As a rule, they are not very wide and weigh very little. Brakes are most often used drive type. On average, the range of the models does not exceed 30 minutes. A good scooter of this company will be around 32 thousand rubles.

Model "Energy 41A" (scooter with electric motor): overview, characteristics

This scooter of the maximum capacity is able to boast at a level of 5 kW. The maximum speed of the represented specimen is 12 km per hour. It should also be noted that the steering wheel is of direct type. Adjust it for height is the possibility with a wrench. The base of this electrosampling is quite wide. In this case, the stand is made of a special aluminum alloy. In addition, it should be noted that the rotor box in this model is reliably protected. In this case, the brake system is provided by the manufacturer of the drive type. It is worth for today the presented electric locomotive in the region of 31 thousand rubles.

The new model "Energy 36V"

Many buyers prefer this model because of its compactness. The stand in this case is completely made of aluminum. At the same time, the manufacturer has a plastic cover. Accelerometer in this case is used rotary type. Thus the starter is available leg. In addition, it should be noted that the wheels are included in the standard kit with a urethane gasket.

The rotor box in this case is quite strong. Footrest manufacturer used welded type. The maximum speed presented by an electric car along an asphalt road is able to collect 10 km per hour. In the market for it sellers are asking about 27 thousand rubles.

Opinion about the Motorboard 2000XR

Motorboard 2000XR (scooter with electric motor) is very interesting by design for many users. The rack in this case is provided with a circular section. In this case, the base in the standard set is turned on with a thickness of exactly 2.2 mm. Loads it stands quite large. The electric motor in the presented copy is installed in a protective box. Its maximum power is 5 kW. All this makes it possible to gain a top speed of 12 km per hour.

The gear box in this case is enclosed in a special casing. Thus, from mechanical damage it is completely protected. The brake system is provided by the manufacturer of the drive type. In this case, the gearbox is used axial. In this case, it is necessary to mention separately the clutch. If you believe the reviews of consumers, then it is set quite high-quality, and the modification is classified as medium hardness. Bendix in this model is a steel type. In the store for the specified electrosamot for today ask about 33 thousand rubles.

Models of the company "Mustang"

This company specializes in the production of electric locks for children. At the same time there are models for adults in its assortment. The frames they are most often made of aluminum alloy. The racks are also used in steel type. Frames are most commonly installed not wide. Due to this, the electrosatches of the represented brand weigh a little. Special attention should be paid to the power of the models.

To date, the maximum speed devices are able to develop up to 1 km per hour. In this case, the engines are often used asynchronous type. The shape of the steering wheel is quite different. By choosing the right model for a simple model. Another distinguishing feature of the presented devices can be called quite qualitative brake systems. In this case, the cables used in them are very strong. Average scooter with an electric motor of the presented brand will cost about 30 thousand rubles.

Description of the scooter "Mustang BL350"

For today this scooter with the electric motor without a rudder is in great demand. The brake system in this case is mounted on the rear wheel. The stand for this model is provided by the manufacturer of an alloy of aluminum. The base of the submitted specimen is rather strong. If you believe the reviews of consumers, then the protective pad on it is almost not erased. Batteries for this electric self-fit are suitable only for lithium-polymer type. They are charged on average about 20 hours. On the market for this model to date, asking about 28 thousand rubles.

Review of the model "Mustang BL800"

This scooter with an electric motor for adults from other devices is characterized by an all-welded frame. In this case, the footboard is made of steel. At the same time, there is a special pad on the base for better stability. If we talk about the engine, then its power reaches in this case exactly 5 kW. Due to this, the mentioned electric locomotive is able to move at a speed of up to 13 km per hour.

Special attention in the presented model deserves the quality of the drive. In this modification, it is installed in a belt type. If you believe the experts' opinions, the gears in the device wear out rather slowly. In addition, it should be noted that it is possible to adjust the position of the rudder in this electric car seat. He is worth about 29 thousand rubles in the store.

Differences of the scooter "Patgir"

Scooter with electric motor "Patgyr" base has a fairly wide. In this case, the frame is of a steel type with a circular cross-section. In addition, it should be noted that the accelerometer of the presented specimen is of a button type. In turn, the drive is installed by the chain manufacturer. If you believe the feedback of consumers, the power reserve parameter is at 30 minutes. Tires in this case are used with a double-type rim. The starter is legible and can be turned on quite simply. The step at the presented electric locomotive is one-piece.

Batteries have a lithium-polymer type. A spare kit is included in the standard kit. If we talk about shortcomings, it should be noted a weak stand. In this case, its diameter is only 2.5 cm. The electric motor in this scooter is installed in a protected box, and its power is at the level of 5 kW. The nozzle on the drain is used friction. Separately, it should be mentioned that the gearbox manufacturer provides an axial type. In the market for this scooter with an electric motor is being asked in our time about 44 thousand rubles.

Scooters of the trade mark "Razor"

Electric stamping of this trademark stators, as a rule, have a foot type. Drives in this case are used both in belt and chain type. At the same time, accelerometers are often installed in a button version. If you believe the experts' opinions, then the wheels of the model in the standard set include quite strong. Of the shortcomings, only weak bases can be noted. In some cases, they are available without overlapping. There will be a good scooter with an electric motor of the presented brand in the region of 47 thousand rubles.

Opinion about the model "Razor E300"

Many buyers of the electrosamocat presented preferences for its compactness. At the same time, it can be transferred quite simply, since it only weighs 10 kg in its assembled form. Bushings in this case are used with bearings. In turn, the couplings are set to medium rigidity. Separately it should be noted that there is no bendix in this model. At the same time the gearbox is installed quite high quality. If you believe the reviews of consumers, then the case of its manufacturer is designed for very durable and mechanical damage is not afraid. On the frame there is a special nozzle for this model. It is made of ordinary rubber. The brake system is used disk, and the cable is flexible. Also from the features it should be noted that the width of the base is as much as 12 cm. Due to this, the stability of this electric car is at a high level.

The rack in diameter is exactly 3 cm. The rudder in the presented configuration is of the direct type. The height can be adjusted using a wrench. Batteries in the standard kit are lead-acid type. Suffices them for continuous use for about 30 minutes. The starter in this case is installed next to the gearbox. The electric motor of the presented specimen is in a special protective cover. It is worth this electric locomotive on two wheels in the region of 48 thousand rubles.

Review of the scooter "Razor E100"

This scooter with an electric motor for children is made with a fairly comfortable folding footrest. The width of the base in this case is 10 cm. Additionally, it should be noted that the accelerometer in this model is standard. However, the drive is installed in a belt type. The power reserve of this electric car is 30 minutes. Rims in this case are used double. In turn, the starter is leg type.

If you believe the reviews of consumers, the batteries in the presented model are quite powerful. Charging their time takes approximately 35 minutes. The stand at this electric lock is installed all-welded. The maximum speed of this model can reach 10 km per hour. The gearbox in the presented modification is absent. In the market for this model ask about 37 thousand rubles.

Description of Evo F1

Scooter with an electric motor Evo is quite simple. The stand is made of aluminum alloy. In addition, it should be noted that the front and rear bushing is made with bearings. In this case, the manufacturer provides medium rigidity. Bendix in this model is used steel, and its diameter is 2.3 cm. The reducer near the electric motor is located in the axial type. Frictional nozzle on the frame is available. Also from the features it is important to mention a quality starter. This model is worth 40 thousand rubles.

Models of the company "Volta"

The electric cars of the presented trade mark are distinguished by rather qualitative bushes. In this case, the bearings are of the swing type. In turn, couplings of different rigidity. With the stabilization of most models, everything is in order. Separately, it should be noted that the market has a lot of folding modifications. They weigh very little and are very simple in transportation.

Reducers in electric motors are most often used axial type. At the same time, they are able to develop maximum power of about 12 km per hour. Nozzles on the base are used the most diverse. Cables in braking systems are quite strong. At the same time, the racks are usually of the all-welded type. It will cost for today a qualitative electric self-winding on two wheels of the presented brand in the region of 38 thousand rubles.

Description of the device "Volta Elite 800"

Most users are positive about this model. In this case, the bushing is installed only at the rear wheel. Bendix is used exactly 2.5 cm in diameter. The reducer is at the same time installed in the bent type. Due to this, the limiting frequency of the model does not exceed 50 rpm. Nozzle on the base is friction. If you believe the consumers' reviews, then it protects the corrosion of metal reliably.

In addition, it should be noted that the braking system is installed only at the rear hub. At the same time, the handle is quite high-quality and covered with a rubber seal. The width of the base in this case is 10 cm. In turn, the height of the stand is 45 cm. The protective coating is not provided by the manufacturer. Batteries for electric locks in the standard set are lead-acid type. If you believe the reviews of consumers, then they are enough for exactly 30 minutes. At the same time, the batteries are charged in about 25 minutes. The specified scooter with an electric motor in the region of 30 thousand rubles will work.

Opinion about the model "Volta Elite 1000"

This electrosampling has many advantages. The base is used in one piece and the thickness is exactly 2 mm. All this suggests that she is practically not afraid of mechanical damage. However, this pro rack can not be said. The thickness of the metal in the steering column is only 1.2 mm. The brake system in this case, the manufacturer provides a rope type.

The bushing is standard with a number of bearings. In this case, the coupling is used rather qualitatively, according to experts. High stabilization of this electros-amp is achieved due to a wide gasket. The electric motor is completely protected. Directly the stator box is equipped with a rubber casing. It is worthwhile presented electric locomotive in our time about 32 thousand rubles.

Motor for the device

To make the electric motor for the scooter by hand, it is necessary to prepare a crankshaft, a rotor and a reducer with a primary winding. First of all, a block is selected for the model. As a rule, in this case a steel case is used. For the shaft in it a small hole is made. After this, the reducer is fixed directly. To connect the rotor to the device, you will need to use a blowtorch. At the end of the job, it will be necessary to fix and lubricate the shaft.

Self-assembly scooter

Make self-powered by yourself is quite simple. First of all, many experts advise to choose the base. For this, you can take a plate of aluminum. In this case, steel can also be used. In this case it is more expedient to take the engine from the drill. After that, a low-frequency reducer is selected.

The bushing with the bearings will have to be purchased at the store. The diameter it must be at least 5.5 cm. At the same time, the coupling is installed last. For the starter in the electric car required a protective box. After installing the footrest, it will be possible to fasten the stand. Further the brake system with a steering column develops.

Assembling a 5 kW model

To assemble a 5KW power scooter with an electric motor with your own hands, it is necessary to select the appropriate motor. After that, the base for the model is cut out standard. The next step is to fix the electric motor on it. For this, it is best to use screws. However, you can use a welding inverter.

Further, to make an electric self-winding yourself, you need to connect a starter. It is more expedient to choose a foot type. The brake system can be arranged only after the rack. For this, it is necessary to measure first. After the rack is installed, the steering column is welded directly. For convenience, rubber pads can be mounted on it.