Saddles with knitting needles: models with description. Warm Home Slippers: Schemes

Footprints are a simplified version of socks, which can easily come in the place of home slippers. The heirs can be purchased in the store, ordered from the master, or you can tie them yourself, especially since it is not so difficult and even a novice needlewoman can do. Variations of mating are very many: using two spokes, three, four, round and so on.

If you knit the studs with knitting needles, the models with the description will be presented below, regardless of which option you choose, choose the more dense yarn, but at the same time not rigid, so that the product can take the shape of your foot when you wear it. Also, orient to the season, for winter time of the year, wool yarn will perfectly suit, and for the spring-summer season, take natural light threads.

In order for the product to be warm, soft and lasting for a long time, the sole is recommended to be knit in several threads, and the relief pattern will have a massage effect on the feet.

Abbreviations

For convenience, some abbreviations will be introduced:

• Series - p.
• Loops - n.
• Face loops - faces.
• Wrong loops - new.
• The central loops are the center.
• The extreme loops - kr.

Instructions for creating the most common model

For work you will need:

• Yarn.
• Knitting needles 3, 5.

Consider the footprints with spokes, a model with a description. Knitting pattern for slippers with knitting needles:

1. Dial 5 spokes on spokes.

• 1p. - cr. 2 persons., Mr., center., 2 persons. Cr. - must be formed 9.
• The next row and all even knit out., And cent. Etc. is discarded.
• 3p. - cr., 2 persons., Mr.., Center., Mr.., 3 years., Cr. - must be formed 9.
• 5 r. - cr., 3 persons., Mr., center., Mr.., 3 L., Cr. - 11 must be formed.

2. Further it is necessary to dial up to 41 loops. During the increase in the number of loops it is recommended to take the third spoke for convenience.

3. The formation of the foot. Divide 41 loops into 3 pieces: 15, 11, 15.

• 1 p. - 15 persons, then transfer to another spoke 10 persons, 2 persons. In 1 point, a coup.
• 2 r. - 10 persons, 2 persons. In 1 point, a coup.

4. Continue the process as on the heel, tying the loops in the center and grabbing one at the edge. As a result, 11 should remain in the center.

5. We study the side parts. Dial another 15 pt. And follow the pattern:

• 1 p. - 9 of us., 5 persons., 2 cr.
• 2 r. - all persons.

6. We send the remaining 11 sts from the sole. On the other spoke, to form the second side, we collect 15 n:

• 1 p. - 11 p. From the sole and 5 persons., 9 rel., 1 cr.
• 2 r. - Coup and screed by the method of payment.

7. We try to trace the length and begin to create a heel.

• In each row 11 stitches of the sole are central.
• We draw the edge with the gripping of loops on the side and make uniform descent on the central ones, sewing twice - 2 points in 1 st.

8. The final step. Close the other loops.

"Rectangular" tracks

You will need:

• Threads.
• Needles number 4, 5.

Knitting pattern for slippers with knitting needles:

1. We type 50 loops.
2. We use a 20-series bandage method.
3. The height of the product is selected individually, the final step is the closing of all loops.
4. As a result, you should get a knitted fabric with a length of 37 centimeters, height - at your discretion. You can create traces of knitting needles with patterns. To decorate the upper row, bind the openwork viscous, using a hook according to the following scheme: to form columns of 5 nakidov through every 3 loops. As a result, the outer part of the tracks will be decorated with a beautiful openwork pattern.
5. Further the rectangular cloth is required to bend the corner at the base and to sew the sole. After that, the remaining part of the sole is sewn, and under the columns, two elements of the upper part of the product are gently sewn.
6. Are you ready? Are you ready?

Following this scheme, each skilled worker can easily link the tracks.

Knit stitches on the sole of the knitting needles

So, we knit the butts with knitting needles. Models with descriptions are given in this material. Another version of slippers - are tracked on the sole. The ideal material for the sole is a felt insole. Insole can be made independently: on paper, circle both feet, then transfer the resulting patterns to the felt material. Pay attention, the insole must be symmetrical! We put the prepared sole aside and proceed to knitting the elements of the tracks:

1. In order to tie slippers-tracks to 36 size, you need to collect 42 loops.

1. By hand or face method, bind 2 cm.
2. Divide the loops into 4 parts:

• Leave the last on the knitting needles.
• Two central parts (20 p.) Continue to knit to the end of the little finger.

4. Further along the rectangular cloth should be typed 25 p.

5. We knit the toe. We irradiate the unfinished series while there are 4 points left on the spoke.

6. We continue tying, typing the loops along the edge of the opposite side.

7. To form the height of the weave, we knit another 6-8 rows.

8. Put the product on your foot, if it's okay, close the hinges. If there is a lack of height, the rows should be tied down, then try on and close the hinges again. Knitting is over.

9. Assembling the product. Using a large needle, it is necessary to sew the knitted fabric to the previously prepared sole.

10. Sew the seam on the heel.

11. Warm slippers are ready!

Follows with embroidery

And this is another one of the spokes with knitting needles (the models with the description will be useful both for novice craftsmen and experienced ones). In this scheme, a seamless knitting technique without elastic is used.

You will need:

• Yarn.
• Needles - 4 pcs.

Step-by-step instruction

1. Depending on the size of the foot, type the required number of loops.
2. To knead 3-4 rows by the "smooth" method and begin to form the heel on four spokes.
3. Then leave the stitches on the two spokes (rest while laying aside) and continue knitting the height of the heel.
4. To create a wedge heel we begin to knit by joining two loops into one.
5. Close all the side hinges.
6. We select the edge loops and continue the work in a circle.
7. To create the necessary size, we remove the loops in even rows on 1, 3 spokes.
8. We fix the required length, until the canvas overlaps the little finger or half of the thumb.
9. Begin to close two loops in even rows on 1, 3 spokes until they are half as small. We subtract both in even and odd numbers.
10. We pull the last four loops together.

Linked slippers are adorned with embroidery. To make it it is possible both multi-colored yarn, and threads floss. The easiest way is to use a regular gypsy needle, and everyone can choose a pattern for their own discretion.

Advice! Do not place the pattern so that it touches the floor when walking, that is, on the side parts with the transition to the sole.

Warm slippers

This technique is good for those who are familiar with knitting socks, but also in newly-made needlewomen will not cause any special difficulties. Slippers are designed for 41, 42 size.

Step-by-step instruction

1. To create the product, proceed from the top of the cuff. On the spoke dial 60 p. Plus 2 cr.
2. Spray 12 r. Method "American rubber band" or 6 rapports in height.
3. For the 1st rapport "American rubber band":

• 1 p. - cr., 2 persons., Rel., 2 persons., Rel., Cr.
• 2 r. - cr., Persons., Direct crochet, 2 persons., Throw the crook through 2 cr. Etc., persons., Throw the crook through 2 kr. Etc., cr.

4. Repeat the diagram of these rows.

5. Having tied a cuff, distribute all loops on 3 spokes:

• 1 - cr. Plus 24 p.
• 2 - 18 p. Central.
• 3 - 24 points and cr.

6. Take a yarn of a different shade and continue the method of "American rubber band" on 2 spokes (central loops), this will be the length of the upper leg section.

7. After completing the repeat of the pattern, it is necessary to proceed to the binding of the lateral element of the trace. To do this, on the sides of the previously linked top, type loops, 30 from each edge, simply picking up the last eyelets on the spoke.

8. Then connect the thread with the beginning of the mating from the cuff, the side element is knotted using the "American elastic band" method - kr. Plus 24 p., The upper side piece - 30 p., The center at the center - 18 p., The second upper side element - 30 p. And the other cuff section 24 p. Plus cr.

9. Turn the product over and continue tying the second row of the pattern in the opposite direction.

10. Having created 3 rapports of the picture or 6 r. In the height of the yarn of another shade, change the color of the thread and tie another 3 rapports or 6 r. Up to the required height of the side element.

11. The sole is bright. Attach the thread to the central part of the base (18 sts), and continue knitting with the technique "facial smoothness", while reducing the number of loops on the sides.

12. When working with individuals. R. Discard 1 pt as a person., Without tying, the remaining 16 pt. Tie the faces., And the last 18 sts tie the faces. With 1 st of the lateral part.

13. Turn the inside out of the product and remove 1 st. As if not., Not tying. The remaining 16 pt. Tie., 18 pt. With 1 st of the lateral part. When forming the sole, in each successive row it is necessary to decrease the trace in one line, then from one side, then from the other side, but the number of central ones must always be 18 p.

14. As soon as there are 10 stitches on each side, proceed to reduce the base for narrowing the heel as follows:

• Take off on the faces. Ranks of cr. Etc., without tying them, then continue the faces.
• As soon as there are 3 points left in the row, two of them are tied simultaneously from the first person, and the last one is tied in one with the cr. Of the lateral element.
• Wrong rows are knitted according to the same pattern.

15. In this way, in each successive series, do the downsides on the sides, as well as in the central area, as a result, there should be 3 points left.

16. Wire them with a single loop with a broach.

17. Cut the thread you worked with, and to tighten the loop, thread the end of the thread through it.

18. Finishing the work on the trail, sew the product on the back element from the heel to the cuff.

19. Try the product and it's ready!

5 recommendations for making slippers from experienced craftsmen

1. Products can be knit in different techniques, but beginner needlewomen should preferably start with simple models, which describes in detail the pattern of knitting.
2. Want to create beautiful pinstripes with knitting needles? To give the product a highlight, you can decorate it with various applications, pompoms, buttons and other decor.
3. Very popular now home knitted boots, which are easy to form, just lengthening the traces of openwork top. From the ankle is a high border - an elastic band.
4. And also from crocheted tracks you can create homemade moccasins. To do this, it is required to sew a dense insole and tie the edges above the ankle.
5. You can tie the female stitches with knitting needles. Some masters improve slippers-tracks with a knitted tape. It is created after the manufacture of lateral elements, grasps the ankle and is fixed on the ascent. And also, you can tie a small strap across the product, which will be fastened to the button.

Conclusion

Making knitting needles is a very creative process, requiring time and skill. Try to connect any model you like, having pleased yourself or someone from home.