Rating of active foam for car washing. Foam for car washing "Kercher": reviews, instruction, composition. Foam for car washing with own hands

It has long been known that it is impossible to clean a car from strong dirt with simple water. No matter how hard you try, you still can not achieve the desired purity. In order to remove dirt from hard-to-reach places, special chemical compounds that reduce surface activity are used. However, they can not get to very small cracks and corners. I have to tear them off manually. And this is very bad for the state of the paint. In order not to damage the appearance of the car, a non-contact sink is used.

It allows to obtain an ideally clean surface without mechanical coating treatment. The process uses foam to wash the car. Its name is due to its good cleansing properties and excellent foaming ability.

What it is?

Foam for car washing - a group of shampoos, which has increased detergent properties based on alkaline solutions and chemical compounds. It does not damage mechanically the paint and varnish surface and well relieves of pollution of almost any complexity. Due to this the appearance of the car is not affected by the fine abrasive, which is mandatory for manual washing.

Active foam for car washing is a solution that has a great penetrating power. It is poorly spreading and remains for a long time on vertical as well as inclined planes. This allows it to remove contaminants from surfaces on which normal shampoo and water do not linger.

Science does not stand still and devises new additives that make it even better and safer to wash the car. Therefore, contactless washing has become so widespread.

Foam for car washing. Instructions for use

The process is not difficult and any car owner can use it. Foam is applied by means of a special device - a steam generator. This unit is connected to the pump and has a high power. It gives a large amount of foam, which consists of small cells. This allows her to get into even the most remote and inaccessible places. These are moldings, the grille and air intakes.

Any foam for non-contact car wash has instructions for use. It describes the following main stages:

1. Application of detergent with a foam generator to the vehicle. It can be a car, a truck or a motorcycle.
2. Exposure of the required amount of time. It is necessary for the detergent to penetrate into the contamination and its cleavage. Takes from half to two minutes.
3. Wash the detergent with a machine that supplies liquid at high pressure.
4. To accelerate drying, to create a protective layer and to give a shine of the surface, it is necessary to use means with polymer wax.
5. Rinsing the car.

Safety regulations

In the process of applying foam, follow all the tips and points indicated in the instructions. This will help to safely clean the painted surfaces, as well as products made of plastic or rubber.

To avoid staining, which then will be very difficult to remove, do not allow the detergent to dry.

• Do not apply foam on hot, as well as heated parts of the car.
• It is not recommended to treat surfaces that have recently been painted or varnished (minimum 3 months).
• To prevent the formation of stains from water, the surface should be wiped with a special napkin. For glasses, microfiber is used. Places not accessible for manual removal of liquid are blown by compressed air.
• Detergent is used strictly in accordance with the instructions and technology. Dilute should be in the recommended proportions.

In accordance with the requirements applicable to contactless cleaning, it is necessary to constantly ventilate the premises, and also to use means for individual protection. Thanks to this foam for car washing is absolutely safe for working personnel.

Pros of non-contact washing

Many people have appreciated contactless washing. Their feedback is often positive, among the main advantages are the following:

1. Saving and reducing the time required for the work of one person.
2. Reduce costs by using a small amount of electricity, water, and human resources.
3. Ability to serve a greater number of customers.
4. Quality removal of dirt in hard-to-reach places.
5. The absence of machining preserves the surfaces for a longer period of service.
6. Protect paint and varnish from dust and dirt with a wax film.
7. Ecological compatibility. Detergents and foam for car washing have a fast period of complete decomposition into harmless for the environment components.

Composition

The remedy should not only wash all kinds of pollution, but also be safe for the human body. Quality foam for car washing, the composition of which is non-toxic, should contain alkali NAOH. However, unscrupulous manufacturers often replace it with another, which leads to diseases of the nasopharynx and lungs in humans.

To ensure that the ecological system does not suffer from waste, the composition of the detergent must consist of substances that, after decay, do not pollute the environment.

The basis of the detergent is shampoo. In addition, active foam should have the following components:

• Additives that impart anticorrosive properties to the coating.
• Surfactants of several classes.
• Solvents and improvers.
• Ethers of alcohols and other useful additives.

Used equipment:

1. High-pressure apparatus.
2. Foam generator.
3. Pistol and spear.
4. Compressor.
5. Washing and cleaning means.

The basis of contactless washing is a foam generator. It is a container in which the detergent is dissolved. It under the influence of high pressure forms foam. A pistol joins the device. When the pressure is lowered through it, the finished foam is ejected.

The device costs a lot of money and is used on professional washers. And what about people who do not have big finances but who love a clean and beautiful car? The answer is simple - to make a foam generator yourself, with which the foam for car washing will be used, cooked by hand.

Such a device will become indispensable for any motorist. In addition, you can add additional features to the device design. This is water heating and the ability to adjust the power level.

But the cleanliness of the car depends not only on quality equipment. Special washing shampoos are needed, which contain reagents that give quality foam.

The recipe for making

At the heart of this type of car body cleaning are surface-active substances. They can account for up to 30% of the total detergent volume. This is because they remove the strongest dirt.

Also, to make an auto shampoo, you will need water. It should have a pH value of 7. This content of acids and alkalis allows the product to safely contact with chromium, lacquer, plastic and rubber.

The next necessary ingredients are complexing agents. They allow the detergent to become more fluid and penetrate into hard-to-reach places. Among them we can distinguish:

• Frother. With its help, the detergent dissolves dirt more effectively.
• Additives and other additives. These are silicone resins, polyphosphates and other substances.
• Anticorrosive additives. They allow the surface to resist rust.
• Substances that allow the car to dry quickly.
• Polishing. It can be silicone or wax.
• Fragrance. It neutralizes all unpleasant odors.

Mixing of components must be carefully and in proportions that will not allow the content of any substance to exceed. Depending on the concentration of the resulting solution, it should be diluted with water. If there is not enough experience, or there is a risk of damage to the coating, then it is recommended to contact professionals.

Active foam rating for car washing

To determine the best detergent, you need to conduct tests and tests that will show their quality and the speed of dirt removal. To create shampoos of equal conditions, you should use them on the same cars with an equal degree of pollution or on the same parts of the body.

The solution from the concentrate should be diluted with a liquid in the proportion indicated by the manufacturer. Then treat the car and evaluate its cleanliness.

It should be remembered that immediately after washing the surfaces will not be in perfect condition. It is worth a little wait, and then the result becomes visible.

However, one comparative sink is not enough to find out what place the foam will take to wash the car. Reviews of ordinary car owners are also taken into account. After all, they have no advantage in advertising any means. For people the main thing is maximum purity for minimum money. Therefore, taking into account all the arguments and opinions, the rating of the active foam for washing the car has acquired the following form:

1. Grass Active Foam.

2. Karcher rm 806.

3. HI-GEAR HG8002N.

4. CLEANOL.

Consider these detergents in more detail.

Active foam for car washing Grass Active Foam

This detergent is intended for non-contact washing and is a weak alkaline concentrate. It easily copes with heavy pollution, as well as stains of engine oil and fuel, dust and traces of insects. When used, it is easily removed with plain water and does not destroy the coating.

The composition includes water, surfactants, alkaline and anti-corrosive substances, active additives, as well as various complexing agents.

Before starting work, the detergent should be diluted in the correct proportions. One car will require 80 to 150 grams of the substance. It depends on its degree of pollution. For foam generators the agent is diluted with water in a proportion of 20 or 30 g per liter of water. For foam - from 300 to 500 gr.

Before applying the product to the car, remove the top layer of dust and dirt. Then, starting from the bottom, the active foam is evenly distributed. Wait for 1-2 minutes. It is important to do everything without the appearance of streaks and to prevent the drying of the detergent. After the active foam dissolves all the dirt, it must be washed off. Water is supplied under high pressure at a distance of 15 - 25 cm.

The agent is an irritant. In case of contact with skin or eyes, rinse with water and seek medical advice.

Shelf life is 3 years.

Foam for car washing "Kercher"

Detergent RM 806 is manufactured in Germany and is designed to remove pollution from vehicles, minibuses, vans, as well as tents and engines in a non-contact way. Foam is able to clean the most resistant dust, oil stains, resin, traces of insects and even clay.

The components included in its composition do not violate the integrity of the paintwork, but also decompose into biologically safe substances.

Concentrate is diluted in proportions of 1: 3 and applied by a foam tank. Do not wet the surface with water. The time for removal of dirt and its splitting is 3-4 minutes. After this, the product is removed by water, which is supplied under high pressure.

During the use of the detergent, the safety precautions should be followed and the protective equipment must be worn. Do not allow to enter into food, enter the respiratory tract and mucous membranes.

Reviews of car owners are positive and negative. Having studied them, you can identify the main pros and cons:

1. The trade mark is one of the most respected in Russia.
2. Requires proper use in accordance with the instructions.
3. Rapid cleavage reaction of dirt.
4. Excellent foaming at dilution in the right proportions.
5. Does not leave behind streaked spots.
6. With long storage does not give precipitation.
7. Kercher Car Wash Foam does not apply to polished aluminum.
8. On materials sensitive to alkali, requires a preliminary test.
9. There is a rumor about a strong allergic effect on the body during washing without protective equipment.
10. Requires a pneumatic atomizer. When applied through a non-standard nozzle, foam is too liquid.
11. Do not mix with wax.

HI-GEAR HG8002N

Detergent received a new canister, as well as a modified composition. Now it meets all specifications and qualitatively removes dirt from the most inaccessible places. Starting with moldings with a radiator, and ending with microcracks on the body of the car.

The product allows to obtain a safe active foam for any surfaces, rubber and plastic parts. When washed with water, it is easily removed and leaves no streaks.

The manufacturer gives a guarantee for high-quality washing, even with very hard water.

Autoshampoo Cleanol

Concentrate "Cleanol Tankman" is a weakly alkaline two-component agent that is used for contactless washing. It got its name because of the advertising move, where a real tank was cleaned of dirt with the help of the facility. It allows you to:

• Remove dirt at any time of year.
• Depending on the concentration, it is suitable for different surfaces.
• Does not leave any stains and does not harm the paintwork.

Foam for car washing "Tank player" is packed in containers of 1, 5 and 20 kg.

Before starting work, stir the liquid. For foam generators is diluted in a proportion of 1: 6. Strongly soiled surfaces should first be cleaned with a jet of water, which is supplied under high pressure.

In summer, the foam is applied to the dry car body, and in winter it is necessary to moisten it.

It is not recommended to use the composition in the open sun. It is necessary to wash in the shade for 2-3 minutes, not allowing the foam to dry completely.

After cleavage of the mud, all active foam is removed with high-pressure water.

During operation, chemical protection agents should be used. In case of contact with skin or eyes, rinse with water and seek medical advice.

The product may freeze during storage. After thawing, it retains its original properties.

Reviews about this tool are mostly positive.

Horse Active foam

This is another representative of detergents. The difference is that it is a foam for washing the car in a can, which, according to the reviews of car owners, is very convenient.

Such a foam is designed to remove stains from petrol and oil stains, resin and insect marks, as well as cleaning discs.

It does not contain impurities that leave the stains on the body.

Refreshes the paint and makes the rubber tires more black.

The cylinder is enough for 1-2 washes - the main drawback, which has a proprietary foam for car washing. Customer reviews confirm this, although the manufacturer assures that the funds are sufficient for a longer period. Therefore, you will not be able to save money, because after a couple of applications you will have to buy a new can. While buying a concentrate weighing 5 or 20 kg, you can provide yourself with a detergent for a long time.

Active foam is an excellent choice for car enthusiasts who do not want to drive a dirty car, but are afraid to damage the exterior coating. It can be used both in specialized car washes and in your garage. It is enough to purchase minimal equipment and have some free time. The main thing is to remember the safety precautions and do not over-wash the detergent on the car.