Properly charge the lithium polymer battery

The lithium polymer battery is today a very popular power source. If you start using it, you should strictly follow all the points prescribed in the instructions, as the unit can overheat, and then catch fire or explode, which will be a health hazard.

Lithium polymer battery requires extremely careful handling. Charge it carefully and store it in strict accordance with the instructions. With each cycle its capacity decreases. However, it is possible to slow down the process of compressing the capacity by storing the device at the temperature indicated on it. You can charge only when using authorized devices equipped with certain wires. Other chargers should not be used, as this could cause a malfunction. The lithium polymer battery can be charged using a special rack for it, which must be strong, resistant to fire, and should not conduct electricity. In addition, in the process of charging, it is necessary to isolate from the battery all objects and things that are prone to light inflammation.

The lithium polymer battery is equipped with a laminated aluminum foil, which is easily subjected to mechanical damage. Therefore, the battery should be inserted into the device as carefully as possible. It is important to remember that it should not be deformed or fall out when the gadget falls. In case of short circuits, such a battery can easily ignite, and at high temperature the shell melts, which causes it to lose its tightness.

Unlike batteries equipped with metal housings, polymer batteries are quite easy to damage. They need to be handled carefully, avoiding various falls, bends and collisions. The battery can not be subjected to pressure, especially its contacts, since they are not very strong in comparison with contacts of other types of batteries.

There are a number of caveats when using this type of battery:

- all effects of fire should be eliminated;

- it is important to exclude any contact with liquids;

- the battery cells can not be overheated, as this may cause a fire or explosion;

- storage is carried out on a special stand, not passing current;

- it is important to remember the observance of the integrity of the battery, it should be protected from bumps and falls. Deformation can lead to a strong release of heat, which causes a fire or explosion;

- The battery should be protected from children.

The lithium polymer battery must be recharged if the following steps are taken:

- The charger must be approved by the manufacturer. It is important to observe the charging modes specified in the manual;

- when charging, you should constantly monitor the battery;

- it is important to comply with the manufacturer's standards in terms of charging time.

If you follow all the rules for handling this type of power source, then problems should arise.