Reinforced concrete slabs are construction products that are used to complete the erection of a building box. Most often they are used to build an empty buildings, making up a roof, which then for a greater tightness is covered with a variety of waterproofing materials. In addition, the cover plate is perfect for various types of insulation materials, it is easy to install gutters and other systems. These products are divided according to the type of installation (monolithic and prefabricated) and in structure (standard, ribbed). Usually both types of plates are used with the use of stressed reinforcement. Despite the fact that the roof does not have any heavy load, it must have durability, and the method with the use of reinforcement is optimal for achieving this goal. Most often for the installation of the roof, the ridge coating plates are chosen because of their strength and simplicity of finishing. For the manufacture of these building products use a hardened arborex, covered with concrete throughout its area. The layer of concrete is not less than 2 centimeters in thickness. Due to their properties, reinforced concrete slabs of the coating benefit from other materials in such parameters as water resistance, fire safety level, resistance to natural factors, increased strength. The last undisputed advantage should be paid special attention to those who are going to build an additional floor in the future. This material will serve as the basis for the future floor. If the technical construction plan provides for the erection of any structures (for example, chimneys, straight-flow hoods, etc.), then a plate with an opening is used to realize such purposes. The standard dimensions of this product are 3x6 m or 3x12 m, the thickness is from a minimum of 25 cm to 45 cm (but it is possible to produce thicker plates with voids inside - to reduce the weight of the ceiling, reduce the load on the foundation.) This reinforced concrete structure also includes Metal elements, they are used for welding with the same elements of other plates, which gives an increase in the strength of their fastening.The cover plate is laid after the completion of the erection of bearing walls.The installation is carried out using a construction crane Delivery of these products to the installation site is carried out by trucks.
Plate coating - it is reliable, inexpensive, fast, high-quality; It is suitable for any type of construction of a variety of buildings. If you need to make a well industrial or drinking, then for such purposes use reinforced concrete rings.
It should be remembered that in order to implement a better and more correct installation of these products, it is necessary to refer to specialists with certain skills in this field of activity.