Pattern of a fur coat from an artificial fur with a hood. Pattern of a fur coat (sheepskin coat) with a hood

Today, women prefer furs of artificial fur. Someone because of the love of animals, and someone just to save. And this trend quickly picked up the designers, offering fashion women a huge number of fur options for a raccoon, mink and fox. And taking into account the use of new technologies, it turns out quite believable pile, pleasant and soft to the touch, with beautiful shine and even with high wear-resistant qualities, similar to natural fur.

If you have the skills of tailoring, you can easily learn how to sew from artificial fur. Patterns, manufacturing tips and will be discussed further.

Choice of materials

This kind of cloth is made on a knitted basis, which makes the products very comfortable and cozy. In addition, the products are quite light, practical and warm. A fur coat or jacket made of artificial fur can be fastened with a zipper or special hooks.

For the manufacture of such products will also need a lining cloth and a heater, which is fashionable to use batting or sintepon.

Product Template

The pattern of a fur coat from an artificial fur with a hood should be with a minimum of details. Firstly, it will facilitate the work, secondly, the product will be more beautiful. To build a template, such measurements are required: chest girth, hips, chest height, length from the shoulder to the waist, the length of the product, the width of the back, the width of the transmission.

The pattern of a fur coat from an artificial fur with a hood is constructed as follows:

• A rectangle with sides is drawn, where the length is equal to the measure from the shoulder to the hem, and the width is ½ the measurement of the chest, the allowance for a free fit is from 7 to 10 cm.
• A neck appears in the right and left corner of the drawing. For this purpose, it retreats 9 cm from the vertical to the side and from the back it deepens by 1.5 cm, and on the side of the shelf - by 5 cm.
• Sections of shoulder seams, equal to the width of the shoulder of +3 cm, are lowered to the edges by 1-1.5 cm to the edge.
• On the chest line, which is located below the upper side of the rectangle in accordance with the "chest height" measurement, the back width + 1/3 of the increment is recorded, and on the reverse side, the width of the transmission is + 1/3 of the gain to the free fit.
• Then follow the smooth line to close the armhole.

Sleeve construction

A pattern of a fur coat from an artificial mink or other fur should have a sleeve with a low pellet. The construction of such a drawing can be based on an armhole or be built separately on a triangle taking into account the length of the cut of the armhole arm. A more accurate way is to build an armhole.

For him it is necessary to cut the details of the cut developed on the drawing, to combine the shoulder seams and to translate the main lines of the armhole onto a separate sheet.

Next, measure the circumference of the upper arm and add a few centimeters to fit freely. After this value is transferred to the drawing, it must pass along the breast line.

You should also determine the middle of the sections of the armhole along the front and rear shelves. The receding of the sleeve emerges 1 cm above the armhole line on the top, then strictly along the cuts to the set midpoints, and then rounded and brought to naught on the bases on the line of the chest, connecting with the extreme points corresponding to the segment defining the circumference of the upper part of the arm.

Hood construction

A pattern of fur coat made of artificial fur with a hood can be built with two variants of hoods. The first is a hood sewn along the neckline, and the second is a hood coming out of the front shelf. The latter looks better and is more comfortable to wear.

To construct a pattern for this part of the cut, two measures should be taken: the circumference of the head, the value from the base of the neck from behind the crown and to the base of the neck in front of the model. Afterwards, in accordance with the standards, a rectangle with sides equal to ½ of the values obtained is constructed.

For the first version of the hood attachment, the right upper corner should be rounded off, mowing the part to the bottom of the right side by 5 cm and at the base of the hood to overestimate it at the occiput by 3-4 cm.

In the second variant it is necessary to take a shelf and determine at what level the hood will be sewn. To do this, you can simply wrap the template, as with the lapel on the lapel on the jacket, and cut this part. After this, the element needs to be glued to the hood drawing so that it continues the open cut in the face. The rest of the manipulations with rounding at the crown and over-emphasis on the occiput are identical.

Sawing

The pattern of a fur coat from an artificial fur with a hood should be transferred to the canvas in stages. In this case, you should follow the pattern on the material, if any, and the direction of the pile. First, you need to circle all the elements along the contour. Here you can use a pen or a marker pen. Cut details with allowances about 1 cm. For this purpose, you need a sharp tailor knife. If scissors are used, then it is necessary to separate the pile well, so that the bald patches do not form on the joint of the parts.

Duplicating parts with a heater

According to the developed templates it is necessary to cut the insulation. Thus it is not necessary to give an allowance for the seams, so that they are not rough. Instead, all parts should be quilted manually, fixing the heater on the back of the main blade. This is best done before stapling the parts.

Stages of assembly and design of the lining

The lining fabric is cut for the same patterns, excluding the size of the flats from the details. The assembly of the product should begin with the sewing of the shoulder seams, after sewing the sleeves, the hood and closing the side sections. Next comes the work with sub-beards and lightning. The lining is assembled in the same order, the only thing is that the seam is left open in one sleeve. To the lining, sew up the bottom and, turning the product through the sleeve, sew the lower section of the base and the lining. For stabilization, use non-woven fabric and note the bend by hand, so that the doorway holds well.

Practical tips

The pattern of a fur coat (sheepskin coat) with a hood must necessarily have an allowance for a loose fit, otherwise the product will be uncomfortable and, when worn, will impede movement. Some masters cut the pile in the docking areas to make the seams softer. Do it better after grinding, after stretched a thin crochet for knitting curled pile.

Such voluminous work can be on the shoulder of a zealous master. A little perseverance - and there will be a smart fur coat or fur jacket. Ideas, patterns and stages of work presented in this article will help you to orient yourself and break down the manufacturing process into stages. And the result will be a chic new outfit of your own production.