Paint Parade: description, features, characteristics, views and reviews

Modern repair almost never does without the use of paint. In a wide range of today you can find facade and interior paints, enamels for interior and exterior works, as well as decorative compounds for forming textured surfaces. In order to achieve a positive result, it is recommended to consider the features of the most popular formulations, each of which has its own purpose. For example, facade paints are designed for intensive loads and are more expensive than those designed for internal work.

Right choice

Paint Parade has gained popularity among consumers, as it has many advantages. It is made from imported raw materials from Western suppliers. The production is fully automated, the quality is monitored at all stages. The product is certified, therefore it can be used for medical and children's institutions. In order to make the right choice, you should consider the characteristics and characteristics of each variety of paint.

Description of paint Parade Classic W4

Paint Parade W4 is a water-dispersive white matt composition, with which you can form a strong vapor-permeable coating. The surface will easily cope with frequent washing. The mixture has decorative properties, firmly adheres to the base and is characterized by excellent hiding power. The paint is resistant to intensive operating loads, wet abrasion and is ready to last more than 5 years.

The application of the mixture can be carried out on brick, cement, plaster, concrete, gypsum, as well as plasterboard and mineral surfaces. It is acceptable to apply on the substrate, which were pasted with roll materials according to the type of wallpaper for painting. From the walls you can not remove vinyl wallpaper or those that are made on paper / non-woven basis. It can be used as a rough surface and glass walls.

Features of use

At a temperature of 20 degrees and a relative humidity of 65%, the drying time will be 1 hour. Between the layers should be aged for 60 minutes, and the complete drying will reach the surface after 2 hours. After the Parade paint is applied, it should be protected from water for 24 hours. After 2 weeks, the surface will become resistant to wet abrasion. The drying time can increase if the recommended humidity and temperature are increased. One liter will be enough for 11.4 square meters of surface, but the final consumption will depend on the type of substrate, absorbency and the presence of unevenness. Parade W4 has a base in the form of an aqueous dispersion of acrylic copolymer. Water may be used as a diluent.

Characteristics of facade paint Parade Classic F20

The facade paint Parade Classic F20 is made on a water-dispersion basis. With it, it is possible to form a vapor-permeable coating that will be resistant to ultraviolet, precipitation, temperature, and moisture. The mixture has high decorative properties, provides excellent hiding power and firmly adheres to the base. The walls are resistant to aggressive influences, washing and maintenance loads.

Dilute the mixture with water in a volume of up to 10%. A liter will be enough for 10.8 square meters. The application is carried out on a low-fat, smooth and clean surface, which should be freed from the remains of loose coatings, as well as dust and dirt. Preparation is carried out mechanically, glossy surfaces like enamel and oil paint must be treated with a fine sandpaper. Cracks, potholes and irregularities should be puttied, and after a surface.

The facade paint Parade F20 should be applied with a roller or brush after mixing. The tool should be moved crosswise. If the thermometer has dropped below 10 degrees, then the coloring work should be discarded. Humidity of air should not be more than 80%.

Reviews of the paint Parade W2

Paint acrylic Parade W2 comes in 10-liter buckets and allows you to form a super-white matte surface. The composition can be subjected to manual tinting. It is intended for internal works. Objects for painting can be ceilings and walls. Excellent rough bases are plaster, concrete, brick, gypsum, wooden, as well as ceramic and painted surfaces. Paint Parade, reviews about which quite often allow buyers to choose the choice, is eco-friendly, water-resistant and water-soluble.

According to users, the surface formed can be subjected to easy wet cleaning, walls and ceilings are capable of undergoing 200 washing cycles. The bases should not be operated under the influence of intensive loads. A liter of paint will be enough for 6 square meters. The density of the coating is 1.5 kg per liter, whiteness is equivalent to 95%. The drying time from dust is 30 minutes, and the surface will dry completely after 1.5 hours. Before you paint, the surface can be degreased by rinsing it with a 5% solution of soda. Unstable holding coatings should be removed, if necessary, fill in depressions and potholes. After drying, the surface is ground.

Characteristics of latex paint Parade W100

Paint Parade W100 is designed for damp rooms, excellent in painting walls, which will be subjected to high loads during operation. One liter of latex will be enough for 10.8 square meters. Complete drying of the surface is achieved in 4 hours. The walls after drying the composition will not lose the ability to vapor permeability. You can use this paint for bathrooms, office space and even swimming pools. After the strength of the composition is set, the surface acquires resistance to frequent wet cleaning.

If necessary, the mixture can be tinted in light shades. This interior Parade paint is able to hide small defects, the layer dries quickly enough that it allows to finish the repair in the shortest possible time. The mixture perfectly emphasizes the texture of any type of wallpaper designed for staining. Do not use the compound if the temperature falls below +5 degrees. Between the layers should be kept for 1 hour, as a solvent, you can use water. Clean the instrument after the staining is completed using water. Store the paint is recommended in a dry room, where the temperature can be equal to the limit of 5 to 35 degrees.

Description of water-based paint W3

Parade W3 water-based paint is used for painting ceilings and walls in buildings that are subject to high operating loads. The acrylic copolymer acts as a binder, and the consumption is equal to one liter per 10.8 square meters. The density of the mixture is 1.6 grams per centimeter cubic. When storing, do not freeze. The minimum application temperature is 10 degrees.

Description of the invoice paint Parade W200

This paint is intended for both exterior and interior works. It is used when necessary to create a layer that will not be afraid of increased operational loads. With its help you can form a decorative relief coating. Such a base can be colored with a water-dispersion composition. Decorative textured paint is used to obtain a relief coating and is especially recommended for halls, offices, stair flights, and corridors. With its help, you can easily hide the existing wall defects, since the mixture has a high hardness. Loss of mobility is achieved in 2-6 hours, which will depend on external conditions. Full drying should be expected in 24 hours, the strength will be set in 7 days. One liter will be enough for one square meter of surface. When working with different bases, the consumption can be reduced, with one liter going to 1.4 square meters.

Features of the paint Deluxe Brilliant Silky Shine

This is an interior acrylic paint premium, which is used for painting ceilings and walls in the premises of any destination. It can be used for bases that will be used in conditions of high humidity. The composition is able to withstand high operational loads, which is why it can be applied to facade elements. The mixture is resistant to wet abrasion and washing, allowing for a long time to preserve the beauty of the coating. Walls and ceilings in the process of operation can be washed using synthetic means and disinfecting compounds with active chlorine. The paint is almost odorless, safe and ecological, so use is justified in the children's rooms. Users note surprisingly economical consumption, high spreading power and the ability of the composition to hide the defects of the substrate. The paint is easy to apply, as it does not form joints and streaks, it allows to achieve a positive result, creating a uniform coating without much effort.

Reviews of Deluxe Brilliant Silky Shine

According to users, the paint dries completely after 4 hours, which significantly reduces the time of repair. One liter will be enough for 14 square meters. If the surface is well prepared, the consumption will decrease and amount to a liter of 16 square meters. As the buyers emphasize, for this it is necessary to reduce the absorbing capacity of the surface, making it as flat as possible. If you want to determine the exact flow rate, you can perform a trial chipping on the object. Experienced users note that if the technology of application and preparation of the surface is observed, the paint layer can last for more than 10 years without loss of quality characteristics.