Molding - what is it? Molding on the car

Molding plays an important role in the design of auto glass. It contributes not only to the transformation of appearance, but also protects the car from getting into it water and dust. Protects from noise and wind. But this is not his only type. When purchasing this copy, you should pay special attention to these issues.

What is he like?

Everyone has heard the term "molding". What is this word, and where did it come from? The origin of it is American. From an architectural point of view, it means decorative molding. From the point of view of the autodel - a special shaped metal for parts of the autocube. In other words - seal.

Benefits:

Transforms the appearance of vehicles;

· Masks the gap between the body and the glass;

· Contributes to the rigidity of the structure;

· Protects the interior of the machine from the penetration of noise, dust and humidity.

The most qualitative characteristics are the original seal, which is molded together with the glass in the production.

The original molding on the car is made using special equipment made from high-quality rubber.

With it, any motorist will not experience unnecessary worries and worries about the "health" of his pet. All kinds of original molding are tested and tested in special laboratories, meet international quality specifications.

Historical reference

The first application of the product began with the 70's. At that time they were strengthened with the help of special clips. Moldings were too noticeable, and the procedure was worth a certain amount of money. Over time, experts suggested modern models of parts that were embedded secretively and were invisible. The installation process became more economical and simplified. Consider the advantages and disadvantages of modern elements, and the challenges that motorists face when installing them.

Main advantages:

1. Perform protective functions, namely: protect the doors and bumper from contact with foreign objects.

2. Carries out load distribution even with the smallest impact.

Disadvantages of the element:

1. Can not protect the entire surface of the car.

2. If the impact is to the side of the layout of the molding - the result should not be expected.

3. The use of protection leads to a change in the appearance of the car, which not everyone likes.

Mounting the protection on the car by yourself

If you decided to install and purchased the specified goods, we will consider in detail the procedure for installing it.

Necessary conditions for mounting the molding:

- cleaned and degreased installation surface of the element;

- the air temperature should not be less than 21 degrees.

Step-by-step procedure:

1. Remove the protective film from it, first exposing the mounting tape.

Note that only the corners of the molding are released from the tape. In this case, the ribbon must go beyond the part. Attention, do not make a mistake. Do not remove the protective film completely. In this way, you complicate your work to move parts.

2. After correctly removing the ribbon from the corners, draw its offset.

3. Carry out the processing of the molding position with the primer. This agent will react with the adhesive on the mounting tape. Thus, the adhesive properties will improve.

4. Complete the installation of the element in its intended location. To do this, pull the edge, which sticks out and remove it from the mounting tape.

5. Firmly press the bar to the body.

6. In order to improve the adhesion properties, soak it for a day in a warm room.

At this procedure, the installation of new items is over. To fix the adhesion of the element to the body of the vehicle, it is recommended to hold it for a day in a warm place and do not wet the body.

Overhead molding. What is it and what are its features?

This type of product is designed to dress its scallop on the frame of the body. To date, this is one of the most popular types. The effectiveness of this molding is very high. But the size of his pick up is problematic, because they are individual, and do not fit any model of the machine. For example, on Japanese cars it should be very small, and for Korean machines - on the contrary.

Molding of a hidden type

It happens in two variations. Let's consider more in detail The first is a kind of rear molding that covers the slots between the body and the glass on the rear windows. The second - involves fixing tape to the inside of the glass. The second part of this protection involves closing the lye between the frame and the glass. There is also a rain model. Its design assumes the presence of a special rain channel for the possibility of water flowing down a special groove.

There is also a capsulated version. In other words, cassette. This type of protection is an integral structure and is cast in an industrial plant together with glass.

Chromed molding on the car is made of high quality stainless steel, which has a brilliant spraying. Over time, it is cracked, so now almost not used.

Advantages of this type of moldings:

· Beautiful appearance;

· Differ in gloss;

· Designed for long-term use;

· Chrome moldings are easy to install (just press against the door, and they will be securely fixed);

· Prevent the vehicle from damage such as scratches.

Universal Instances

The most suitable option is universal molding. What it is? What are his virtues?

Their universality is due to the fact that they fit most of the cars and are approved by the installers.

Benefits:

· All-weather;

Flexibility, which facilitates ease of installation;

· Made of high quality material, they are similar to the original models of the goods;

· Have been tested and investigated in laboratories;

· The budget price.

Negative points:

· Non-natural material of manufacture;

· Lack of correct form rigidity.

Questions of the classification of car goods

Window moldings are largely dependent on the types of auto glass, which can be either with straight or rounded corners. For straight lines, three-way elements are usually used. For rounded - half-hidden models. Used most often on the side windows of the car.

Windshield molding slightly differs in its design and can consist of several parts that are placed around the perimeter of the window. For this, rubber or plastic pads are used.

Windshield molding has the following objectives:

· Cosmetic;

· Send rain drops in the right direction;

· Help keep the windshield on the car.

When installing the protection on the windshield, do not forget about the preliminary degreasing and cleaning of the glass surface. The downside of frontal molding is the deterioration in the quality of the review. Therefore, before installing it, you should think carefully about whether you need it. If you want to protect your vehicle and transform its appearance, this product is exactly what you were looking for. For example, rubber trimmed lining - this is the ideal moldings on the VAZ. If you want them to become an adornment of a car - better that they are chrome plated.

Installation of protection on the car by own hands

Mounting molding does not take much time. A maximum of this will take half an hour. First, you need to determine which part of the car it needs, and then you need to decide on the type. The most popular are rubber models. For example, the molding, the photo of which is indicated below, is made of rubber.

Installation of it on the machine can be carried out either by drilling, or using glue or scotch tape. Most of the sold models of the product is initially equipped with an adhesive tape. Therefore motorists give preference to him.

On what place to glue it?

Usually on the car there is a certain sticking out of the place for the protection equipment.

But there are cases when there is no place or it is incorrect. Then you need to navigate yourself and choose the most convex place, which is most likely to be damaged by opening the door (or, if it's a bumper, when parking). At the same time, it should be located at the bottom of the vehicle. It is better to hold the sticker of an element with an assistant, since this will greatly simplify the task and save a lot of time. When using a glue on a silicone base for drying, it will take about half an hour. If you used a double-sided scotch type ZM - you can go to the road immediately after the sticker.

So, we got acquainted with such a means of protecting the machine from damage, like molding. What is it is now clear to everyone.