"Konner", radiator: types, reviews. Cast iron radiators Konner

In the market for quite a long time known products of the company "Konner", the radiator of this brand can be bimetallic, cast iron or aluminum. These products unite the guaranteed European quality, although these devices are manufactured in China.

Main types of Konner radiators: cast-iron batteries

Conner is a radiator, which is presented in the sale of cast iron products. They are designed for systems with natural or forced circulation of water. This heating equipment breaks past stereotypes, since it has a high manufacturing quality.

These devices meet the aesthetic and technical requirements, so they were able to become a highly effective addition of heating systems. It is impossible not to mention the affordable cost, as well as durability, corrosion resistance and immunity to any type of coolant. This also applies to water quality. Conner is a cast iron radiator that is ready to last up to 50 years. It can be used in high-rise buildings, or rather in heating systems that work under high pressure. Due to the fact that the instruments have low hydraulic resistance, they can be used in systems with natural circulation. Even more versatile such products are due to the different diameters of the input pipes. The accessories are delivered together with a device that is certified and fully complies with state standards.

Characteristics of Conner aluminum radiators

If you do not fit the cast iron radiators Konner, you can consider aluminum, which, according to users, are strong, light and incomparable design. Instruments have a high elegance of performance, but they work quite efficiently, with increased heat output. Consumers also note the high reliability of these batteries.

Cast iron radiators "Konner" may seem to some consumers quite expensive. But aluminum models have an acceptable cost, and they can be performed using casting technology or extrusion method. The depth of these instruments can be 70 and 100 mm. The round section of the collector, the use of composite glue, the installation of connections by laser welding allow the radiators to undergo high pressure. If we are talking about cast aluminum radiators, then their depth can vary from 80 to 100 mm. The average value is 85 mm. The center distance is 500 mm.

Reviews about aluminum models

Conner is a radiator, which is also offered by the manufacturer in the form of aluminum appliances. Consumers especially emphasize that when buying these devices, you need to pay special attention to ensuring that the product is not defective. This is due to the fact that some buyers are faced with such problems. It's good if you can exchange the device. In 3 years, these units in some apartments give a leak, but you can use the service support for the warranty.

If Konner radiators are installed within a single room, then you should consider whether they match their shades and appearance. In some cases, models differ from each other, despite the fact that the boxes are absolutely identical.

Feedback about Konner bimetal radiators

Konner bimetal radiators are the most innovative development in this field. They are manufactured taking into account the operating conditions in Russia. The design is very strong, which is ensured by the presence of an internal collector. According to buyers, it is made of high-alloy steel, which gives the nodes resistance to corrosion. This feature eliminates the contact of the coolant and water, which is why bimetallic devices are able to work together with any coolant. As the buyers emphasize, it does not matter what the acid-base balance is.

During the manufacture of these devices are tested, and at the final stage are covered with epoxy enamel. Users like this very much, since this approach allows preserving the primary properties and the surface does not violate the integrity during the whole lifetime, while it remains resistant to ultraviolet radiation.

Negative feedback on Konner cast iron radiators

Heating radiators "Conner", as mentioned above, can be bimetallic, aluminum or cast iron. The latter will be discussed in this section. Some consumers argue that this acquisition can not be called beneficial, since the quality is known in the process of operation. Externally, these batteries look aesthetically attractive, look stylish, heat emission, according to the supplier, is great and reaches a rate of 150 watts from each section.

Consumers claim that the installation in any case is successful, without difficulties and quickly enough. But after the start of heating, the most unpleasant things start. In the premises it's cold, the declared figures are just a publicity. The temperature does not rise above 23 ° C. Some, choosing cast iron radiators, the price of which will be mentioned below, after they change them to traditional aluminum radiators. From this it is necessary to draw a conclusion that it is necessary to get acquainted with the qualitative characteristics of these devices before purchasing, and also correctly calculate the heat capacity.

Cost

If you decide to buy Konner cast iron radiators, you should pay attention to the cost of one section, which is limited to 430 rubles. In this case we are talking about the "Modern 500" device, the heat capacity of which is 150 W from one section. If you prefer 4 sections, the power will be 600 W, and the cost will increase to 1720 rubles. Cast-iron radiators of heating, the price of which reaches 6450 rubles, can have a heat capacity of 2250 watts. The number of sections is 15. It should be noted that this equipment is manufactured by injection molding, which is most often preferred by modern consumers.

If you do not need such a heat capacity, then you can choose a device, one section of which produces 120 watts. Thus, the model "Modern 300" will have to pay 420 rubles. Whereas if the heat capacity increases to 1800 W, and the number of sections - to 15, the cost is already 6300 rubles.

Conclusion

From the reviews it can be understood that these products have many advantages. Among them, it is necessary to highlight the resistance to hydraulic shocks in the system, impressive heat transfer, absolute environmental and safety, and an attractive appearance.