Installation of polypropylene pipes is the best way to save money.

You thought for a long time and came to the conclusion that it's time to change old water pipes? The question arose about which ones? In a large assortment of products offered, it is easy to get lost. Without advice clearly not do. Perhaps, the best option is the installation of polypropylene pipes.

Why them? Before all the others, they have a number of advantages. Namely:

• Unlike metal pipes, they are resistant to corrosion.
• Withstand a high temperature difference.
• Are able to withstand a large temperature difference - from -20 to +95 degrees.
• Service life with hot water supply - up to 50 years, with cold - up to 100 years.
• For a short time, they are able to withstand a temperature of 1000 degrees.
• Neutral to most kinds of acids.
• You can install polypropylene pipes by yourself, without any special skills.
• Relatively low price.

And this is not a complete list of all the advantages. If you decide to do self-installation of heating from polypropylene pipes, this in addition will significantly save money. It's no secret that the plumber services are not cheap. To do all this, it is enough to follow a number of simple rules.

First you need to purchase a welding machine, without it, installation of polypropylene pipes will not be possible. Its cost is about 2500 - 3000 rubles. The complete set includes a soldering iron, a set of heating elements for different pipe diameters, protective gloves, a pipe cutter. Even if you no longer need it, buying it is much more profitable, since locksmiths for installation will have to pay much more.

Exaggerated the whole process can be divided into three stages.

Stage one is planning.

This, it can be said, is the most important moment. It is necessary to accurately calculate and
Outline the location of the radiators and the required footage for the pipe. When purchasing material, do not forget about corners, couplings and other necessary accessories.

Stage two is preparation.

Here it is worth remembering the old saying that the tailors use: "Measure seven times, cut once". At this stage it is necessary to mark and cut the pipes to the size, and also to avoid twisting, when you make the installation of polypropylene pipes, on them and the details of the connection it is necessary to make notes.

Stage three is the connection.

It remains to assemble the whole structure. It is not difficult. With help Acquired polypropylene pipes can be made even by a schoolchild. We will not consider the welding process in detail, because in the attached instructions to the device there is a detailed description of the performance of the work. It remains to connect the radiators and fill the system with water to check the reliability of the connections.

If there is no leak, then, as they say, the ship will not go to the bottom. I hope that you do not have
There will be difficulties with the installation, in addition, it is also quite a fascinating process. Personally, I, after making heating in my house, for a long time figuring out where else they can apply. As a result, a system of drip irrigation appeared in the garden, replacing the pipes with half of the villagers. Of course, not gratuitously.