How to mold animals from plasticine: several step-by-step instructions

The ability to sculpt from plasticine is very important. After all, it is possible to create from this ordinary material a real work of art: a miniature statuette or even a composition. This masterpiece will be nice to receive as a gift. Yes, and standing on the shelf fashioned funny mouse or a couple of funny cats will decorate the room very much. Because it is so important to know how to sculpt animals from plasticine to all people: adults and children.

Stucco figurines as a gift to relatives

Of course, plasticine has its own drawback: fashioned compositions, unfortunately, are short-lived, they can easily change their appearance. Therefore, after learning how to sculpt animals from plasticine and creating a beautiful composition or statuette, you can cast the most beautiful figures from a more durable material, for example, from gypsum, clay, salt dough or polymer clay. In this case, the figure is flooded with silicone sealant, allowed to dry, cut in half to remove clay and to obtain a silicone mold for casting. Then plaster is poured into the mold, it is filled with salt test or clay and allowed to dry. After the seizure, the things from the form are processed (burned, dried or boiled) and colored.

Professional sculpture and learning of modeling children

Sculptors-professionals on the question of how to sculpt animals from plasticine, answer that the whole figure must be made from one piece. Do not separately sculpt the head, paws, tails, and then attach them to the torso.

However, it will be difficult for a beginner to do. The majority are inclined to the fact that it is much easier to create a figure more easily than to fashion it professionally from one piece. Especially this method is convenient in the case if we are molding animals from plasticine with children.

Figures of stylized animals

Since sculpting animals from plasticine can be stylized, then this method should be considered in more detail. In this technique, the main emphasis is on modeling the head, and the body of all the figures is fashioned the same, in a separately selected form. For example, the master decides the animal's body to stylize under an inverted glass.

Then the animal's head is represented by a ball, to which are attached ears, horns, eyes and noses: heels, muzzles.

Animal modeling based on

An interesting way to use in sculpting animals from plasticine or another material (salt dough, plastic clay), the base, chosen from improvised material. The eggshell, a plastic or cardboard cup, an empty plastic bottle can serve as it. In this case, the substrate is smeared with a mass for modeling, and then the details are piled on top: legs and paws, ears and eyes, horns and tails.

For example, you can make a funny pig, a frog or a rabbit from an egg, and a lamb, a foal, a calf or a pig from the cups. Creatively looks pig, which is made on a bottle basis.

If we only learn how to sculpt animals from plasticine, then we can use the following algorithm for creating piglets from plasticine and a plastic bottle.

1. Rolls a thin plasticine layer, which covers the bottle completely. It is important to make the coating even, carefully wipe the seams.
2. From the sausages make the legs and attach under the trunk.
3. To the place where the lid of the bottle is hidden, attach a snout or a piglet.
4. The muzzle above the muzzle is slightly higher and the ears are slightly further away.
5. From a thin sausage make a tail and attach it from the end of the figure opposite from the muzzle.
6. The eyes are made of light plasticine small balls, put on the right place and pressed with a finger, flattening.
7. In the middle of the eye flattened quite tiny black or blue ball - the pupil.

Step-by-step instruction for modeling a worm or snake

If we do not yet have the necessary skills and we mold out plasticine animals in stages, learning this art, then we should start with a snake or a worm.

1. Cutting a piece of mass with a plastic knife, you need to roll out sausage from it.
2. Then it should be shaped like an elongated cone. For this, one end is rolled out thinner and thinner to such an extent that it becomes sharp.
3. The second end is rounded - it will be a muzzle.
4. Round eyes are attached to the muzzle, made of plasticine of a different color, with pupils. Below attach sausage, imitating a smile. Snake can add a forked tongue.
5. The body of the snake or worm is laid with a smooth curve, strips and a pattern are applied.

Step-by-step instruction for sculpting a crocodile

1. Begin the molding in the same way as in the case of a worm - with a sausage cone.
2. The muzzle of the crocodile is formed not round, but elongated, like a tail, and then it must be flattened.
3. Eyes are made from balls for all animals.
4. Short paws are fashioned with sausages, they are bent and fastened to the body on the sides. The crocodile should lie on the abdomen, not leaning on the paws.

Step-by-step instruction of giraffe modeling

1. Sausage for the torso is molded together with the neck. It should be slightly narrowed from the side of the head. The thick edge is rounded and slightly bent.
2. To the bottom of the thick edge, four sausages-legs are attached.
3. A pear-shaped head is attached to the top of the thin end. Eyes are done in the usual way.
4. Important distinctive elements of the giraffe are small horns on the head, ears.
5. In the back of the trunk attach a thin tail. Throughout the body you need to make dark spots.