How to make street flowerpots for flowers with your own hands?

Landscaping of the site can become quite fascinating occupation for the summer resident, but it can not always be called easy, in addition, such work takes a lot of time. But it is especially interesting to create exterior elements that will decorate the adjacent territory, and you will be able to do such work without spending money. The most effective, but rather simple option would be street flowerpots. With your own hands you can execute them from improvised materials. For this we use:

• car tires;
• Old dishes;
• Stumps;
• concrete.

If your choice fell on tires, then it's best to prefer winter studless, as they are easy to cut. The tire must have a wheel disc that will serve as a support for the construction.

Preparation of tools

If you decide to make flowerpots for flowers by your own hands, then you should prepare some tools and materials, among them you should highlight:

• Grinding machine;
• pencil;
• A primer;
• Paint;
• Sharp knife;
• Soap solution;
• Paint brush.

Marking and contour cutting

To carry out the work, it is necessary to use a tire, which must first be cleaned of dirt and laid on a flat surface flat. Around the metal disc with chalk or pencil, you should outline the cut line. It can be flat, zigzag or wavy, the solution will tell you fantasy.

If the cut is supposed to be made figurative, then the projections should have the same shape and size, otherwise the edging will not look very neat. On the drawn line in the next step, it is necessary to cut off the upper sidewall of the product. To facilitate the process, it is necessary to periodically wet the knife in soapy water. To form a shape contour, it is recommended to use an electric jigsaw, its blade must first be dipped into the same soap solution.

Methods of work

If you decide to make street flowerpots for flowers by yourself, the master class presented in the article is recommended to study before this. From it you can understand that in the next stage the tires are turned upside down, the wheel rim should step on and poke a small piece of rubber, turning the product out. This will require physical effort, but the more the tire will turn out, the easier it will be. On this we can assume that the pot is almost ready, it will only need to give the ideal shape, processing the slices and decorating the structure from the outside.

Figured edging can be made in the form of rounded or sharp petals, triangles or fringe. Use for this you need a sharp knife. Slicers are processed by a grinding machine, so that the edges are perfectly smooth. When flowerpots are made for street flowers by their own hands, it is recommended to consider the photo. They will allow you to understand by what method to act.

Recommendations of a specialist

The next step is decorating the product. To do this, its outer surface is cleaned and degreased, and then covered with a primer. As soon as the rubber dries, you can begin to color it. In this case, there are many options. Some masters of vases are made monophonic or bicolour. On the surface you can draw stripes or draw an ornament, as well as flowers. Everything will depend on your skills.

The most advantageous solution will be decorating the flowerpot in the form of a flower. To do this, you can use oil nitro paint, enamel compositions, automotive mixtures in cans. The interior should also be painted, because it is viewed from the outside.

Manufacture of flowerpots made of concrete

Flowerpots for concrete street flowers by their own hands are also often made by domestic craftsmen. These works can not be called difficult. For casting, it is best to use factory molds made of plastic. Wicker baskets, cardboard boxes, old basins, buckets or bowls will do.

To carry out the work, it is necessary to prepare:

• sand;
• cement;
• Forms of different sizes;
• A container for mixing the solution;
• Plastic tube;
• knife;
• vegetable oil;
• Water.

When preparing a plastic pipe, it is necessary to prefer the one whose diameter is between 1.5 and 2 cm. As for the length, it should be equivalent to 20 cm. If in the arsenal you could not find the atomizer, then it can be replaced with a brush. Form can be two plastic bowls, their diameter should be different.

Preparation of mortar, molds and pouring of concrete

Street flowerpots for flowers with their own hands, as practice shows, quite simply to make. This is especially the case when it comes to concrete. To mix the solution, prepare a container in which 3 parts of sand and 2 parts of cement are covered. Ingredients are mixed, then water should be added to them. The solution must be mixed well, so that no lumps remain.

If you want to make the pot more decorative, then you can add a pigment to the composition. Ready mixture should be moderately dense and homogeneous. When street flowerpots for flowers are made by hand with concrete, it is necessary to prepare a bowl of a larger size, the inner surface of which is coated with vegetable oil. The other is processed outside.

The plastic tube should be cut into 4 pieces, each of which will have a length equal to 5 cm. Now you can proceed to pour the solution. At the bottom of a large bowl is poured a layer with a thickness ranging from 2 to 3 cm. In it, you need to install pieces of pipe, placing them closer to the center of the container. After the solution has grasped, a smaller bowl needs to be placed in a larger container, and the space between the walls is filled with a solution. In order to exclude shearing of the bowl when pouring, it is necessary to lay a brick or stone on its bottom. The top of the solution should be leveled with a trowel and leave the structure in this state for two days.

Recommendations of a specialist

You may well have flowerpots for street flowers with your own hands. In the next step, the inner container must be removed, and care must be taken to ensure that the edges of the product are not damaged. The concrete should be moistened and wrapped with a film. Within two weeks, the vase should be periodically moistened and sheltered from ultraviolet light.

After 7 days the container is turned over, it must be knocked out of the mold. If no suitable bowls were found, then boxes made of cardboard can be used for the pot. Seams should be strengthened with the help of an adhesive tape. In a smaller box, you need to cut the bottom, and in the bottom of a large box, pour the clean sand with a thin layer. Part of the solution is poured into a height of 3 cm, from above it will be necessary to install a box without a bottom.

The space between the walls is filled with mortar, and a week later the boxes need to be removed, whereas in the bottom of the vase it is necessary to drill a hole for drainage. Vases for street flowers with their own hands can be made using the same technology and using wicker baskets, old buckets or other containers. In order to give the surface an interesting shape, the walls need to be laid out with relief leaves, thin fir branches or flowers. After you paint the product, it will look even more attractive.

Interesting ideas of vases: the use of stumps

Very harmonious and natural in any garden will look like vases of stumps. For their manufacture are suitable spili or smooth stumps, whose diameter reaches 40 cm. The most decorative are considered to be birch stumps. To carry out the work, it is necessary to prepare:

• A disk saw;
• drill;
• Antiseptic mixture;
• pencil;
• A chisel.

Carrying out stump processing

Street flowerpots for flowers with their own hands, the design, the ideas of which are described in the article, can be made of natural materials. Here belong stumps of old trees. The top of the stump must be cut to obtain a smooth surface. The bark should be left in place, in this case the product will look more natural. On the cut, you need to mark the circle, having deviated from the edge of 8 cm.

On the perimeter of the marking it is necessary to drill holes, the depth of which will reach 10 cm. The next step is to select the core chisel. Now it is worth preparing the foundation. The walls of the future vase are aligned vertically. Now you can drill a few drainage holes, placing them at the base.

Pot of plastic pipes and twigs

If you are attracted to the appearance of street flowerpots, you can make them yourself with pipes from pipes. Such designs are great for country style. The product will have a cylindrical shape, because the plastic pipe is taken as a basis. For the decor, you need to prepare even thin branches of the tree and burlap, they are easy to find on the cutting in the forest.

The plastic pipe for the work must be cut to the desired height. Inside the round stone is pounded, so that it reliably falls on the bottom and does not fall out. This will give stability to the structure. From the outside, the surface of the pipe should be wrapped with burlap, bending the edges inside and fixing on liquid nails. Special evenness in this case, do not need to, because the fabric will be covered with branches. Street flowerpots for flowers with their own hands from improvised materials is quite simple to perform. In the next step, it is necessary to connect the branches into a single whole with a twine or a jute thread, connecting them with a simple knot. If the pot is not high, then it is enough to tie it from below and from above. If the length is more than a meter, then the branches need to be connected also in the middle.

Making a flowerpot from cement and fabric

Street flowerpots for flowers with their own hands made of cement and fabric can be performed. To carry out such work you need to stock up:

• An old bucket;
• Cement of mark M-500;
• A pair of rubber gloves.

The old bucket must be turned upside down and put on a raised platform. From below, the earth is covered with film or cardboard, so that the flowing concrete does not spoil the landscape. For fitting on a bucket a rag is put on, which is planned to be used to create a flower pot.

In the basin you need to dilute the cement with water to get a consistency of thick sour cream, pour in a little Fairy. The cloth is immersed in the solution, it is left there to be poured with concrete. The outer surface of the bucket is lubricated with vegetable oil, so that the mold does not stick to it.

At the next stage, the impregnated material is removed and in this form is thrown on the bucket. It is important to give the future design a shape. Such street flowerpots for flowers with their own hands made of pipes and cloth are made using a certain technology. It involves drying the product for three days. With some periodicity, the surface must be sprinkled with water, this will increase frost resistance. After 3 days, a bucket is taken out from under the pot, while the product itself can be turned upside down and left for a week under a canopy. The finished vase is covered with a primer to reduce porosity, and after it can be painted with acrylic or varnished for exterior work on stone and concrete.

Conclusion

Now you know how to make street flowerpots for flowers with your own hands made of cement, rags, tree branches and other materials. Use for the performance of such work can even small gravel. For this, on the surface of the plastic mold it is necessary to screw in self-tapping screws whose heads should rise 2 mm above the surface.

The hats are braided with a kapron thread to create a frame on which the cement slurry will be retained. It is laid out on the next stage, and it is necessary to start from the bottom, immediately laying out the stones, while trying to arrange them as close as possible to each other. This vase also needs to be dried for 4 days.