Ironing board with own hands: technology of construction

The ironing board is a very convenient accessory that facilitates the process of taking care of clothes. However, its storage is problematic enough. The ironing board, made with hand made from improvised materials, can be built-in or foldable, which greatly facilitates its use.

Such a product can be built into a wall or a partition. At the same time, it can be disguised as a general interior, and when folded, the board will not be visible. In order to build such a construction, you will need a Bulgarian with a cutting ring, drill, sandpaper, wood hacksaw, and a vacuum cleaner (for garbage collection). The ironing board built-in with your own hands is made quite simply. It is necessary to take a piece of thick plywood and cut out of it an element of the required shape. A hole in the wall is cut through it.

In order for the board to be supplied and used, you will need a wooden beam-support. The element will be attached to the wall by means of loops. Such an ironing board with your own hands cuts out very quickly. The depth of the niche under the product should be about 10 cm. The height and width of the niche should accurately repeat the dimensions of the board. After the hole is ready, it should be carefully processed with its sandpaper and primer mix. In principle, in order to "cultivate" the opening, you can use gypsum board.

Ironing board, made by hand, has a simple design, so even a layman can cope with the work. During the fastening of the product, you should also consider the height at which you will use it. Try to mount the board so that you feel comfortable. After the main cloth has been screwed, it is necessary to fix the support on which the board will be installed in the working mode.

The folding ironing board with its own hands is built according to the same scheme. If you want the self-made structure to unfold, then it must be cut in the middle and twisted with the help of loops. In this case, the board will take much less space and will be easy enough to use.

To fully prepare the structure for work, it is necessary to cut out a piece of foam rubber, the size of which will correspond to the dimensions of the fabric. Then attach it to the plywood and tighten the fabric cover. The wrong side of the board can be pasted with the same wallpaper with which the walls of the room are trimmed.

Pay attention to the fact that the board should be fixed in the wall with a special device. Otherwise, she can lean back on her own. Such a situation can not be allowed. During operation, all wooden parts should be treated with antiseptic, which will significantly increase the life of the tree.

In principle, an ironing board, made with the help of all the rules, can serve you for a long time and will cost much less than a store product. These are all the features of the construction of the presented structure. Choose for work only quality materials. Good luck!