Homeliness, Do it yourself
How to make an arch of drywall yourself: a professional solution
Today with constantly updated materials, you can create truly amazing things in the design of apartments. A great popularity was won by arched
Alternatively, you can perform the arch using plaster, using a template, but this is not very practical. It is much easier to make an arch from gypsum board, not using templates, but simply following some recommendations.
Preparation of aperture and technological process of creating an arch
Everything begins with preparatory work. As a rule, the arch in most cases is installed instead of the door unit. The working area and the opening are carefully cleaned of dust and other debris. For those who do not yet know how to make an arch: from the plasterboard parts are made by the hands, which will be fastened from the sides of the opening. It is necessary to do the following:
- Perform markup on drywall sheets that correspond to the width of the sides of the opening. To make a circle for an arch or, in other words, an arc, it is necessary to prepare a pencil, an awl and a string.
- Then, focusing on the radius of the future arch, make two loops at the right distance. Silo and pencil are threaded into the eyelets, then the awl is stuck in a sheet of plasterboard, and a pencil is drawn with an arc, and the string should be stretched.
- The second part of the arc is drawn along the ready-made template of the first part. Then the frame for the arch is made.
Gradually, the topic of interest to us, how to make an arch of plasterboard with our own hands, is already becoming
Execution of the arch framework
The frame plays here practically the main role, since it actually is the base on which the elements of plasterboard are fastened. The frame is made of a profile on a metal base. In order for the sheet to bend, the lateral parts are cut. For a more accurate fit as a template, you can use harvested arch side panels.
After the frame is made, you can strengthen it in the doorway, and then screw the finished sidewalls to the frame. We negate the topic of interest to us, how to make an arch of plasterboard with our own hands, and finish the lower part of the curved surface.
There are several options with which you can bend drywall, without breaking the sheets. So:
- In the first case, use the dry method, when the bend does not exceed the radius
Curvatures of 30 cm. To do this, small incisions are made on the sheet, which should not damage the lower layer of paper. You need to go a few millimeters into the sheet. Then the sheet is slowly broken, then attached to the frame by screws. All previous notches are shpaklyuyutsya. - The second method is to soak the sheet, when wetting, the sheet can bend, and after drying, leave the form into which it was artificially deformed. With this option, you can make an arch for the opening without any problems.
Probably, now we finally dispelled doubts about how to make the arch of drywall itself. You just need to be guided by small, but effective rules, and you will get the expected result.
Similar articles
Trending Now