How to make a wooden floor in a wooden house more even: practical recommendations

Over time, the surface of the wooden floor wears out and requires restoration. Properly performed looping of the old surface will significantly improve the appearance of the worn coating. The process of the cycle is to remove from the worn surface of the old layer of varnish or mastic, as well as the appearance of unevenness and burrs. Since it is more difficult to make a wooden floor in a wooden house more difficult, it will be necessary to resort to the help of such a tool as a sewing machine.

First you need to familiarize yourself with some of the features of this work. It is necessary to find out whether this method is suitable for your long-suffering gender. Carefully inspect it and evaluate the strength of fastening old boards. If they hang out, and there are wide cracks between them, then it will be useless to carry out a cycling with a typewriter. In this case, the old floor will have to be removed and reinstalled on the logs. If you are thinking about how to make the wooden floor in a wooden house a little bit more even, you should also bear in mind the fact that the boards should in no case have nails that can disable your tool.

If the floor is dense and does not play, then you can safely use the machine for a cycle. They come in various designs - surface grinding, drum and tape - depending on what the principle of operation of each of them will differ. In addition to the machine will require consumables and repair materials - emery cloth, lacquer and putty paste. If the cost of them seems too big for you, then think about the fact that the new floor in a wooden house can not be done quickly, and it will cost much more.

Preparation for cycling

If the skirting boards are nailed down, they can be left in place. But we advise you not to spare time and completely to dismantle them: as we make a wooden floor in a wooden house more exactly with the help of an electric tool, do not take chances and leave extra opportunities for its spoilage. It is necessary to check the surface of the floor not only for the presence of nails and screws, but also to put up exposed hard knots and petrified layers of paint. When the machine is operated, they can damage the belt of the grinding tool.

Stages of batching

• With the help of rough grinding remove the old coating from the parquet. In this case, it is better to use a special surface grinding tool.
• The second grinding is carried out by a disk surface grinding tool. They remove traces of rough processing.
• The third stage - the finishing of the surface - is made by an angular grinder. She "work out" hard-to-reach places.

The slots and other defects that remain after the grinding work must be filled. So the floor in a wooden house (with its own hands, polish it, by the way, quite simply) will become even more beautiful.

Putty

The filling of the slots is made with filler paste, which can be mixed with clean dust left from grinding. A thoroughly mixed paste is applied with a spatula, evenly spreading it over all areas that have defects. After the final drying of the repaired areas, they must once again be ground to obtain a perfectly smooth and smooth surface. Then you need to thoroughly clean the floor of small debris and dust. After finishing cleaning we proceed to applying a special varnish or paint, after which we dry the coating for at least two days.

We hope that the article was useful to you, and you learned how to make a wooden floor in a wooden house not only more even, but also much more attractive!