HobbyNeedlework

How to make a Snow Maiden with your own hands?

What is the New Year, if under the tree there will not be traditional characters - the symbols of this holiday? Therefore, we suggest that you familiarize yourself with several master classes, how to make Santa Claus and the Snow Maiden your own hands from paper, a bottle and other materials.

How to make a fake Snow Maiden?

There are two ways to create Granddaughter of Santa Claus, depending on the materials selected - simple and complex.

Simple methods include the following options:

  • paper;
  • Plastic bottle;
  • Ribbons and a glass bottle;
  • Ready doll.

To more complex options include the use of tissue and thread. Since in the first case it is proposed to sew the Snow Maiden on its own, and in the second case it is to be tied together.

Regardless of how you decide to make your Snow Maiden, the craft will turn out to be nice and unique.

Snow Maiden from a doll

To create such crafts you need a ready-made doll. Most often used is an old Barbie or a similar toy. Therefore, the main process is to create a girl's outfit.

For a master class, besides a doll, you will need to take:

  • Blue corrugated paper;
  • Thin ribbons of blue and white;
  • Thin lace of two shades;
  • Small decor for the ready order of the granddaughter (for example, asterisks, beads and beads, rhinestones, etc.);
  • A piece of white felt;
  • Piece of styrofoam;
  • scissors;
  • stationery knife;
  • Glue gun.

Making the frame

To make the doll stable, and the skirt lush, you need to make a frame. To do this, take the foam. In height, it should be equal to the length of the legs of the selected toy.

In the center of a piece of polystyrene, gently cut a round hole into which you can then put the doll. Remember that it should not stagger. Then cut out of a thick cardboard a circle of arbitrary diameter. The size of the future skirt depends on its size. The finished circle is glued to the bottom of the foam. Now grind the piece with a clerical knife from all sides to make a cone. The frame is ready.

The process of creating attire

A step-by-step instruction on how to make a Snow Maiden by your own hands:

  1. Take a piece of corrugated paper and cut out the square. In size, it should be several centimeters greater than the diameter of the bottom.
  2. Using a glue gun, glue the square to the bottom of the stand, and wrap the edges upward. To ensure that everything turned out neatly, in several places, cut the paper.
  3. Now cut out the rectangle from the same paper and loosely top the cone. The hole must remain open.
  4. Cut another large rectangle. In length, it should be the same as the stand, and in width - in all places to encircle the cone.
  5. Make a small accordion on one side of the rectangle. This will be the undulating hem of the skirt.
  6. On the opposite side, make a fold. It is necessary that the skirt beautifully and evenly lay on the frame.
  7. Gently glue the resulting part onto the stand. The folds can also be glued together.
  8. From the same paper, cut two identical strips.
  9. Glue on the doll first one strip, - it must cross the chest and back diagonally, - and then the other crosswise.
  10. On the bottom of the resulting blouse, glue a small skirt. Do this in the same way as with the skirt on the skeleton.
  11. Cut off small pieces of lace and make sleeves.
  12. Cut out a thin strip of lace and wrap it around the neck and lower it in front in the center. Fix the tape in several places with glue.
  13. Cut another thin strip of lace and wrap it several times at the waist of the doll. Fix the end of the tape to the adhesive. The belt turned out.
  14. Pinch the braid with a braid. As a decoration weave a blue and white ribbon.
  15. The top of the doll is ready, it remains to insert the toy into the pedestal with the skirt.
  16. Cut out a small rectangle of white felt. Height make arbitrary, but in length it should be enough to grab the head of the doll.
  17. Fold the cylinder out of the felt, glue its edges.
  18. Cut a rectangle out of paper and stick it on the cylinder.
  19. Make the edges of the felt wavy on both sides.
  20. Put the ready hat on the doll's head.

Beautiful Snow Maiden is ready!

How to make Snow Maiden from paper?

Of ordinary paper, the voluminous work of the Snow Maiden can be done in several ways. For example, using as a basis a cone.

To do this, take a piece of white paper. You can use both cardboard and album sheet. Fold it so that the cone comes out. Glue the edges so that the shape does not turn around.

The bottom of the cone is cut by half a centimeter with scissors. The incisions need to be made very close to each other, so that the fringe turns out. Cut a very thin strip of white paper and make the cuts on the same side in the same way.

Draw the cone. Piece of blue paint. It will be an outfit. Top leave white. There it is necessary to draw eyes, a nose, a mouth and a blush. On the dress itself draw pens and gloves. Do not forget to depict your hair and braid.

Cut a few pieces from the strip with fringe and glue them in the center of the cone, as well as on the top of the mittens.

Cut out the cardboard box. Draw it and decorate with rhinestones or paillettes. Cut in the kokoshnik in the center of the triangles and put it on the head of the Snow Maiden.

Crafting from a workpiece

Instructions how to make Snow Maiden from paper:

  1. Take a sheet of cardboard and a pencil.
  2. Draw a contour on the paper, as in the picture below.
  3. Cut the part along the contour.
  4. Tilt the left and right sashes inside.
  5. Draw a hand-made article. Draw a little face, a scythe, a kokoshnik. Beautify the dress of the Snow Maiden.
  6. Take the cotton wool and PVA glue.
  7. Tear off small cotton pieces from the cotton wool and glue them on the mittens and edges of the fur coat.

The handicraft is ready! Such Snegurka can be used as a statuette and as a postcard.

To make Santa Claus and Snow Maiden of paper the same, take the same piece and change the top to a semicircle. Gather in the same way and decorate, like Santa Claus. Then you will get the full set.

Origami - Granddaughter of Santa Claus

To collect such a sweet Snow Maiden, you need to take:

  • One sheet of blue paper of square form;
  • A small sheet of blue rectangular paper;
  • Two identical small square leaves of blue;
  • One medium square sheet of beige or yellow;
  • A white stripe of paper not more than two centimeters.

All paper should be chosen so that it is white on the reverse side. If this is not, then simply glue the colored sheet to white.

Master class, how to make the Snow Maiden with their own hands in the origami technique:

  1. Take the largest square piece of paper and fold it in half.
  2. Expand the sheet and fold it back in half.
  3. When you rotate the paper again, you should have two creases forming a cross.
  4. Now wrap the paper on two opposite sides for half a centimeter.
  5. From the bottom, fold the paper a couple of centimeters.
  6. The upper left and right corners are wrapped in the center line of the fold.
  7. Turn the reverse side of the workpiece.
  8. Wrap the left and right sides of the craft as shown in the picture.
  9. Bend back the top corner of the resulting figure.
  10. Turn the lower left and right corners upward.
  11. Reverse the figure with the back side.
  12. Take a thin strip of white paper and fold it in half in length.
  13. Turn the sheet and bend its right and left sides to the fold in the middle.
  14. Insert the resulting strip into the previous shape. For this, put the top under the upper triangle, and the bottom - under the strip below. You got an outfit for the Snow Maiden.

Putting our head together

  1. Take a square sheet of paper in yellow or white and fold it in half diagonally. Expand the sheet.
  2. Now turn the left and right sides to the formed line. Repeat this step one more time.
  3. Fold the figure diagonally.
  4. Slightly pull back the tip of the bent triangle.
  5. Turn the reverse side of the workpiece.
  6. Fold the long triangle in half.
  7. Turn the workpiece over again. Now the head is ready.

We make gloves

Sleeves are assembled from two identical and small in size squares of blue.

  1. Take one square, fold it in half diagonally.
  2. Unfold the shape.
  3. Wrap the left and right sides so that their tops touch the fold line.
  4. Slightly turn away one of the corners.
  5. Turn over the workpiece.

You got a glove. Do the same in the same way.

We fold the cap and collect the figure

  1. Take the blue rectangular sheet and fold it in half.
  2. Expand the sheet and fold it in half so that when you re-open it, a cross from the fold lines is formed.
  3. Put the rectangle in length and wrap the upper part to the bottom.
  4. Wrap the left and right corners to the center line of the fold.
  5. Turn the upper corner slightly.
  6. Fold the thin strip from below.
  7. Turn over the figure. Now you have a hat.

When all the details of the craft are ready, they need to be assembled with each other. To do this, simply place all the elements on the very first workpiece and glue them with PVA glue.

Plastic Snow Maiden

Description of how to make Snow Maiden from a plastic bottle with the help of improvised materials:

  1. Take an empty bottle of yogurt. This container perfectly simulates the figure of the girl.
  2. Make a ball out of cotton wool and cover it with paper in papier-mache technique.
  3. Paste the bottle with blue paper.
  4. From the same paper make two small cones and push them into cotton wool. It will be hands.
  5. Glue the head and hands to the bottle. Draw your head. Draw a face, outline a blue cap.
  6. From the threads make a pigtail and glue it to the edge of the cap.
  7. From cotton wool, make a fringe on the Snow Maiden's outfit and her headdress. The girl is ready!

And how to make a Snow Maiden from a plastic bottle?

Santa Claus and the Snow Maiden from plastic

Prepare two plastic bottles - one bigger, the other smaller. Also take cotton wool or cotton wool, two ribbons, woolen threads, glue, scissors, paints and brushes.

And now a master class, how to make Santa Claus and the Snow Maiden with your own hands:

  1. Remove the plastic bottles from the labels and cover with cotton. To do this, pour the PVA glue into a container (for example, a plate) and dip small pieces of cotton wool or cotton wool into it. Then the material is applied to the entire surface of the bottle. Layers should be uniform everywhere. You need to glue the bottle together with the stopper.
  2. Wait until the glue is completely dry. This can take a long time, so it's best to use a hairdryer.
  3. Glue the pieces of cotton wool together into a roll and glue it to the bottle on both sides. It will be the hands of figurines.
  4. When the mannequins are ready, cover them with the appropriate paint - Snow Maiden blue, and Santa Claus red. The area with the lid should be painted with beige paint, because there will be a little face. In this case, the top of the cover is painted in the same color as the body.
  5. Allow the paint to dry. If necessary, apply a second coat.
  6. Now you need to make a fur outfit from the cotton wool. Simply tightly glue the places where there should be an edge (sleeves, the center of the coat, the bottom of the cap and apparel) and attach pieces of cotton wool.
  7. Draw on the face of the eyes, nose and mouth.
  8. From woolen threads weave a three-dimensional braid and glue under the cap of Snow Maiden.
  9. Santa Claus of cotton wool blinded beard. This is done in the same way as the edge.
  10. Tie bands of appropriate colors to statues.

Santa Claus and Snow Maiden are ready!

Snow Maiden Dress for Champagne

You can make not only the handmade "Snow Maiden", but also dress in a suit of a bottle of champagne, which can decorate the New Year's table. Especially since empty containers can then be used as the granddaughter of Santa Claus.

Detailed instructions how to make a Snow Maiden from a bottle of champagne :

  1. Clean the bottle from the paper label.
  2. Take the blue tape of medium width and the glue gun.
  3. Make one turn around the bottle, a little back from the foil.
  4. The turn must go a little under the slope to form a triangle - a cutout.
  5. Cut off excess tape and glue the edges with a glue gun to the bottle. In the same way, secure the tape from the rear by placing a glue point on the glass.
  6. Similarly, do a few more turns - five or six. Each next row should slightly overlap the previous one.
  7. Now wrap the tape around the bottle horizontally and connect the ends with glue.
  8. Also make several rows to the end.
  9. Take a little sintepon and make the frame of the top of the dress and cover the seam of the rows of the tape.
  10. On the outer contour of the synthetic edge and at the bottom of the fur coat, paste rhinestones or beads.
  11. From thin strips of sintepon make a pigtail.
  12. Several times wrap the tape around the cork and fasten the ranks between each other with an adhesive gun. Wrap the design with a piece of sintepon and paste the rhinestones. It will be a hat. It should not tightly cover the cork.
  13. Attach the braid inside the cap.

The outfit is ready!

Similarly, you can do and Santa Claus. Just use the red ribbon for this.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.delachieve.com. Theme powered by WordPress.