How to make a flower box by yourself?

If you want to make a flower box with your own hands, you must first take care that all the necessary materials and tools are available. As a suitable solution, of course, wood acts. Size and shape you can choose yourself, these parameters will depend not only on your preferences, but also on the location of the structure.

Preparation of materials and tools

In order to make a box for flowers with your own hands, you will need an electric jigsaw, a plane, a grinder, a hammer, a square, a screwdriver, a tape measure, and also tongs. For lack of jigsaw, you can use a saw. However, the work in this case will produce somewhat more complicated, and the process itself will be longer. The design is selected depending on the availability of appropriate equipment, if you want to work manually, it is easiest to make a simple rectangular or square box. Whereas if there is an electric tool available, it allows you to make any designs. A flower box can be made from the pieces of OSB, plywood sheet, as well as various racks and boards. The thickness of the latter should be 10 millimeters and more. In order to treat the surface and protect the material from the negative influence of insects and microorganisms, it is necessary to prepare an antiseptic composition. Wood will look more attractive if it is treated with stain, but any other coloring composition will do. Fastening of details can be made with the help of self-tapping screws, nails or glue. Quite often, masters use two methods of fastening at once.

Technology of making a box for flowers

If you decide to make a box for flowers with your own hands, then at the first stage you need to use boards, the width of which is 20 cm. From them you will need to cut the workpieces, these will be three long elements that will go on board and bottom. Whereas the other two will be used for the ends. The latter should be made somewhat wider than the bottom. The difference will be in the thickness of the sidewalls. Details must be treated with a plane, and then with large sandpaper. At the edges must be drilled holes, 4 need to be located in the end blanks, while the other three - in the side.

Features of assembly of a structure

When making balcony boxes for flowers with your own hands, then when assembling the sides and the bottom you need to use wood screws, the length of which is 50 millimeters. Only after you can proceed to install the end parts. After the floral container is assembled, its surface can be ground using a fine sandpaper for carrying out these manipulations. The wooden box must be impregnated at the last stage with the help of antiseptic composition, do not forget about one side, whereas outside the product can be covered with stain, the enamel or varnish is also ideal for these purposes.

Making a flower box from pallets

Balcony boxes for flowers with their own hands can be made from pallets. To do this, the old stand must be dismantled into separate parts, the straps should be gently pinched with a nail. As for the fasteners, it is necessary to extract them with forceps. If there are damaged and rotten slats, they need to be removed. Typically, of these products there are about ten suitable boards. The wood will need to be cut to the required size, then cleaned with an abrasive pad. The next step is to assemble the upper frame and the lower base. Two parts must be fastened with side panels, use nails for this. Decorative bars allow to mask the joints. Now the master can start finishing work with paint and varnish materials.

Designer's recommendations

If you decide to make such a wooden box for flowers with your own hands, then the outer surface can be decorated with wood chips. It can be thick branches or planks, which have the appearance of a fence. In the lower part you need to strengthen the legs, which must be made of bars. This will ensure the ventilation and preservation of wood in good condition.

Flowers inside should be placed in plastic pots, but as an alternative solution planting plants directly into the box itself can be used. Beforehand, you need to lay the film on the bottom, having made drainage holes in it.

Alternative version of the box

Before you make a flower box with your own hands, the master must carefully approach the issue of material selection. A floorboard with a width of 10 cm can be used as a floorboard . The same set of materials is required for the work. Choosing the height of the container, you can prefer a parameter equal to 40 centimeters. After the boards are connected to each other, you can install bars in the corners. If you intend to plant climbing plants in such boxes, then support should be provided for them. To do this, from the narrow bars should be cut, and then knock down the grate, which must be fixed to the finished drawer on the inside.

Conclusion

Those masters who want to make boxes for flowers with their own hands made of wood, it is necessary to think over every nuance, in particular it concerns the durability of the structure. If poor quality wood is used, then after some time the construction will change its original linear dimensions. That is why it is important not only to observe the technology of work, but also to choose good material. For the sample, you can use as material whatever you can find in your garage or shed. From old articles of life, too, something very interesting can turn out. However, it is necessary to take care of the comfort of plants.