How to make a crossbow with your own hands without problems?

If you ever thought about how to make a crossbow with your own hands with good characteristics, then this information is for you. Before describing the manufacturing process, I would like to talk about the design of self-made crossbows in more detail, so that you understand the principle of their work.

Crossbow and its advantages

Crossbow is a symbiosis of onions and guns. It's very expensive if you buy it in a store. Chinese options are more suitable for shooting from a distance of not more than a dozen meters.

Therefore, the problem of how to make a crossbow with your own hands so that it is powerful and at the same time accurate and heapy is so urgent. To do this, you must follow certain manufacturing rules.

Instructions for making a crossbow

Before you make a crossbow from a tree, you need to determine all its parameters:

• Height and length of the product should not exceed twenty centimeters;
• The length of the bed is approximately 675 millimeters;
• The weight of a crossbow should not be more than 1.5 kilograms;
• Onions should be made about half a meter in length;
• The bowstring should be 225 mm.

Observance of all the listed sizes is very important when deciding how to make a crossbow with your own hands more accurate and heaped. After all, it depends on its balance and stability during the shooting.

The leaf spring of the onion is chosen not less than 2 mm. For example, you can apply for these purposes a spring trim from the sofa. Also the springs from the old sofa will do. Provided that you have nothing suitable is not available, I will give you one piece of advice on how to make a crossbow with your own hands from those materials that are lying right under your feet. Often, mattresses are thrown away to the dump because of their obsolescence. Therefore, you need to walk around the landfill and find the right springs.

The bow, consisting of four springs, is capable of pushing an arrow up to 25 kilograms. To shoot up to 15 meters, this is enough. For the first tests of a crossbow, you can take a simple packing rope. In the future, using a steel cable of two-three-millimeter thickness, you can increase the reliability of the string in dozens of times.
The trigger mechanism is best made like the crossbows of the Middle Ages. This scheme is time-tested and easy to manufacture. The length of the trigger is 15 mm. To strongly not strain with the manufacture of the trigger mechanism, it is possible to use the details of the fastening element from the "Ruby" TV of the old version for this purpose.

The string for pulling the bowstring and the trigger is made of wire 5-6 mm. The holder for arrows is even easier to make. It is enough to take simple office paper clips and attach them in the right place to the crossbow.

After that, the lamellar bow is inserted into the groove, observing the angle of its installation with a 72-degree gutter. Thus, with a relaxed string, the distance to the chute should be 5 mm.
At shooting it is possible to use not only purchased arrows, but also made independently. Fruit boxes are suitable for these purposes. The stabilizer for arrows can be a small piece cut from a plastic bottle.

If you are thinking about how to make a crossbow for hunting yourself, then you can not do without increasing its strength. To do this, just add the number of springs.

Also, remember that the arrows in any case should be the same. Inaccuracy in the manufacture will lead to an increase in the accuracy of their entry into the target, and therefore to misses.

As you can see, there is nothing complicated in the manufacture of the crossbow. It is only worth the effort and a little bit of assiduity, and you will become the owner of this masterpiece!