HobbyNeedlework

How to fix a zipper if it breaks when fastening?

Fasteners such as "lightning" are found today on clothes, shoes, home textiles, sports equipment and a variety of accessories. Their main advantages - ease of use in combination with an aesthetic appearance. But, unfortunately, such fasteners sometimes break. How to fix a lightning, if it disperse, with your own hands?

Do not rush to carry a thing for repairs!

A clasp on an expensive thing can seriously upset you. But before making a decision about throwing a damaged object or visiting a workshop, do not be lazy to study the injured lightning carefully. You can perform repairs yourself and very quickly, provided that the spiral or teeth are not seriously damaged. Slide the slider to the beginning of the fastener and gently squeeze its edges with pliers alternately on each side. Do not press on the jumper located in the middle, it can easily break with such exposure. How to repair the zipper, if it does not fit, and the pliers at hand was not there? You will be rescued by a small hammer or any tool that can replace it. Slightly tap the edges of the slider so that they tighten. Usually this option of repair allows you to save the buckle, which just started to disperse. But what if the lightning in the jacket is too loose? How to fix the clasp for more serious damage?

Repair of the zippers with their own hands

Sometimes lightning begins to disperse due to the breakage of one tooth or several. The simplest version of repair is to find a similar buckle-donor. Be sure to compare the size of the teeth, they should be the same. With donor lightning, you need to remove the required number of elements, using a tweezer or a small flat screwdriver. Then transfer and fix the teeth on the repaired buckle. Attention: when locating denticles, it is important to accurately observe the intervals of gaps between them. For firm fixing, simply clamp the elements with pliers. How to fix a lightning, if it is divergent due to the absence of a tooth, and the donor lock is not of suitable size? You can try to fill in the pass with a suitable plastic fragment. If the clasp is small - just cut a length suitable for the length of the cotton swab. Then cut the workpiece along and try it on with the zipper. You can fix a tooth substitute by sewing it with tight threads to the textile base of the zipper.

Repair or sew?

How to fix a lightning, if it diverge near its end? If the fastener functions for the most part of its length and begins to diverge only at the very end, one should think about the expediency of repairing it. Depending on the specifics of the product's cut and the location of the lightning, it can be much more convenient and easier to simply sew it in place of breakage. Pick up the thread in the tone of the textile part of the lock. And sew in a few stitches a zipper a few teeth above the place where it usually diverges. If this part of the lock is not visible, you can fix it by means of a metal clamp to strengthen the fixation. This method of repair will help you out if the lightning bolt parted on the boot. How to fix a fast lock at home, you now know. But what needs to be done in order for lightning to break as little as possible?

Secrets of care for lightning and prevention of breakdowns

Try always to slowly and neatly unfasten and fasten the lock. It is especially important to explain to children that lightning does not tolerate sharp jerks and the use of brute force. Before fastening, align the edges of the fastener. On some products, lightning can crack - it is desirable to try to straighten it and pull it. If the clasp has become very tight, it makes sense to lubricate it. For this purpose, a bar of soap or a wax candle - just grind the teeth on each side and enjoy the ease of unbuttoning.

Lightning on shoes should be cleaned regularly with a small brush. Especially afraid of fasteners of this type of dirt and sand. Absolutely different "weaknesses" of lightning on clothes. Before washing, they must be buttoned, and the product should be turned inside out. When ironing, try not to touch the iron with the fastener. By following these simple rules, you will most likely never encounter problems. But if there's still a lightning bolt on the bag, how to fix it, you now know.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.delachieve.com. Theme powered by WordPress.