Homeliness, Do it yourself
How to fix the zipper: practical recommendations
Lightning on clothes that began to diverge, causes discomfort and nervous irritation. However, the problem can be eliminated without resorting to the services of the workshops. How to fix the lightning? Let's try to find the answer to this question.
What to do when the slider does not cash in on the zipper?
To strengthen the ruffled area, as an alternative to nail polish, it is worth using quick-hardening glue. Apply it to the damaged part of the lightning in small portions. This method makes it possible to use lightning much longer than in the case of varnish.
How to fix the slider?
If the lightning bolt diverge due to damage to the slider, the latter must be tightened. To do this, you will need regular pliers. With their help, you need to clamp the metal on each side of the slider. Press the product in the middle, in the place where the tongue is fastened, it is not necessary. This can lead to final damage to the slider.
How to fix the lightning in the case when the above actions did not give the expected result? In this situation, you will have to completely change the slider. To remove it, it is necessary to remove the limiters at the base of the lightning, bending them with an awl. Selecting a new slider, it is worth paying attention to the size of the old one. The parameter is indicated on the inside of the tool.
How to fix a zipper if it does not have enough teeth?
What should I do if I need to restore a metal zipper? In this situation, you can repair the product by inserting the missing teeth in place, taken from the old lightning. The main thing is that they fit according to the shape and size. To fix them to the place of formation of a hole, you can tighten it with the help of pliers.
Sometimes the teeth protrude to the side and prevent the free movement of the runner. In this situation it is necessary to place the zipper on a firm, level surface, after which gently tap on its entire surface with a hammer.
How to fix a lightning, if it runs tightly on a slider?
A universal lubricant that does not harm a valuable thing is the lead extracted from the pencil. In order for the slider to smoothly move, it is necessary several times to hold the lead across the entire length of the zipper. Then, several times, fasten and unfasten the product. This will evenly distribute such a peculiar lubricant.
Alternatively, lightning can be rubbed with soap or wax. This is recommended from the inside. Otherwise, the lubricant can give things a not too aesthetic look.
Finally
So we found out what can be done if the lightning broke, how to repair the product. To do this, it is sufficient to use the improvised means that will be found in every house. With accurate performance of work, you can fully restore the operation of lightning, without resorting to the services of masters.
Similar articles
Trending Now