How to fill the floor in the apartment? Good advice

Repair in an apartment usually begins with floors, so a lot of questions arise. In this situation, it is important to do everything right. The question "how to fill the floor in an apartment" is very important, since usually the floor is not perfectly flat.

Very many do not know how to do it right. First you need to get rid of the old coating, if any. After you get rid of it, you need to clean the bottom of the floor and remove all the dust. The entire surface of the abutment of the floor to the walls is required to be covered with waterproof mastic. It is important to pay attention to the joints, as well as the passage of pipes and all kinds of cracks. They represent the greatest danger of leaks. Speaking about how to fill the floor in the apartment, it should be noted that after you have processed all the mastic, it is required to make a flooring of the roll isoplast, which gives more reliable protection, and also provides waterproofing floors. Only after this you can proceed to further work.

If you talk about how to properly fill concrete floors, it is worth noting that the next stage you will need to install beacons that correspond to the level of the future sex. This is done using a special profile, which is almost not bent, allowing you to ensure a flat surface. Under it it is necessary to put the cut squares of plasterboard to get the required height, and then you can grab it with gypsum, which will fix the beacons.

When the installation of these elements is completed, it will be clearly visible to what level the floor will rise, as well as what space you need to fill. If the rise in the floor level is to a height of more than 5 centimeters, it is recommended to pour claydite. This is done so that there is not too much stress on the floor, in addition, it absorbs moisture perfectly.

Considering the question "how to fill the floor in the apartment," it must be said that further you can start working directly with cement, but before that the surface needs to be primed. The solution is made from a dry cement mixture, which is quite feasible to buy in the construction market in your city. To begin with, a rough floor is poured in , which must dry well before you start the rest of the work. You can walk on the fresh screed after 24 hours, but it's too early to put the coating on.

Now you can consider how to fill the filler floor? When the roughing screed is completely dry, it is possible to start filling with a self-leveling mortar. The floor again must dry out qualitatively. After that, the ideal surface will be ready, and then on it you can lay any coating that you like: laminate, linoleum, parquet board, ceramic tile or something else.

Now that you know how to fill the floor in an apartment, you can do it yourself. Then you can start the rest of the work in the room. It is important to remember that when buying a variety of building materials, you need to look at their shelf life, as many dry mixtures have very limited time.