How do windows move to winter mode? Key recommendations

Operating plastic windows, we do not even think about the fact that they, it turns out, work in two modes - summer and winter. Experts say that this shows the advantages of PVC-constructions in comparison with traditional window systems. And how do windows move to winter mode and why is it even needed?

What is the point?

The summer and winter modes of plastic windows depend on the fittings, that is, on its class. Note that it is presented in three variations. The first - budgetary - is used to equip plastic double-glazed windows of economy class, its main purpose is the opening and closing of windows. Standard fittings equips windows that can be converted into seasonal modes. The most reliable and convenient in operation is a specialized fittings, which are put on anti-burglary and reinforced plastic windows. As a rule, it provides for the possibility of transition from summer to winter.

How to check?

How do windows move to winter mode? First of all, it's worth checking if there is an opportunity for this in your plastic windows. And for this in the trunnions - they are located on the side of the window - there must be holes for a key or a screwdriver. In addition, there must be an oval eccentric, which allows changing modes. So if you feel that the window is blowing, then it's time to translate it to winter mode. Experts advise: if the window is not blown, it is better not to change the modes, as this increases the load on the seal, which worsens faster.

Why do windows lose integrity?

Since the windows are transferred to winter mode, many experts advise, let's try to understand why the designs become leaky. The most basic reason is the use of poor-quality profiles, the second - illiterate installation of structures, which leads to a deterioration of thermal insulation properties. Loose contiguity of the doors to the frame leads to the fact that through the gaps in the room will get dust, cold, noise, and the heat will go away. And in the winter, such moments are undesirable, and therefore the translation of windows into the winter regime is required.

In order not to have to decide how to move windows to winter mode, entrust their installation to professionals. They carefully measure the openings, select suitable structures, so that even with the thermal expansion of the profile material, it occupies the maximally dense part of the allotted opening. Change of modes is required for a number of reasons:

• The shutters close badly or loosely, which occurs due to the sagging of the hinges or the already exposed winter position on the adjusting screw;
• Through the seals in the room, the wind blows, the dust blows;
• The leaflets sag because of the wear of the hinges;
• The leaf is displaced relatively to the window horizontally;
• Tuning modes was initially performed incorrectly.

Features of translation

How do windows move to winter mode? All the works are reduced to attention to the hardware - if it is translated incorrectly, this will have a detrimental effect on the state of the entire window. But remember that constantly keep the winter regime is not worth it, because a strong clamp will lead to a rapid wear of the seal. Conversion of windows is performed as follows:

1. First you need to find the trunnions on the sash. Their number varies depending on the size of the leaf - the larger it is, the greater the number of pins, each of which needs to be put into winter mode.
2. Translation of pins. To do this, use a special tool in the form of hexahedron, screwdriver, pliers. Each trunnion should be rotated to the maximum possible position, while it is important to adjust the level of the clamping of the leaflets. Most often, the translation of the journal is performed clockwise. How do I move windows to winter mode if the hardware is non-standard? In this case, before adjusting the fittings, pull the trunnions toward you, as a clockwork mechanism on the wristwatch, adjust them, and then return to the original position.
3. Check the result. To do this, close the window to check how tightly the handle rotates. The winter mode assumes more tight pressing of the leaf, so the window handle will close tighter.

You can check the pressing force in a simple way: take a sheet of paper and press it with the flap. Then you need to try to pull out the sheet. If the window is moved to winter mode, the leaf will be harder to pull out.

What are the difficulties?

Not all designs can be adjusted, so you need to pay attention to the study of their features, before deciding how to move windows to winter mode. The photo shows that this process is, in fact, simple, but you need to know if there are technical possibilities for adjusting window designs. We examine the sashes from the sides - this is where the holes calculated for the hex key are located. If there are no holes, then you need to either change the fittings, or choose a stronger sealant.

We prepare the surface

It is necessary to perform a number of actions before moving the windows into winter mode. The photo shows that the preparation process is simple:

• The joints and joints at the ends of the valves are carefully cleaned with a damp cloth;
• Internal mechanisms must be protected from contamination;
• The surface of the accessories is cleaned with a brush with a hard pile;
• All rubbing parts must be wiped dry with a rag;
• If the sealant is worn out, it must be replaced;
• The adjusting screw is lubricated with a silicone compound.

Precisely the same actions are taken before moving the metal-plastic windows into winter mode.

conclusions

Setting the modes is the right process, as only this guarantees the correct installation of the window structure. All measures are done accurately, without the use of force, so as not to damage the frame or sashes. Experts say that with tight fit of the doors to the frame and the installation of a new design, regime change is often not required. In other cases it is necessary to change the regime every six months - from summer to winter, and vice versa.

In many modern designs, high-quality fittings are installed, which allows changing the modes. So if you do not know how to translate the Rehau windows into winter mode, first see if there are trunnions on the flaps, and then follow the instructions above.